The unconditional and fast reset of fixed-frequency superconducting qubits is crucial for the operation of near-term quantum computers at elevated trigger rates. Many reset schemes are either conditional (depend on the qubit's state) or require flux tunability. This study presents an all-microwave pulsed reset sequence that uses the readout resonator to unconditionally empty a fixed-frequency transmon qubit, and that also reduces the qubit thermal population. This method could be used to increase the repetition rate of a superconducting quantum computer running, for example, variational eigensolvers requiring many measurements.
The unconditional and fast reset of fixed-frequency superconducting qubits is crucial for the operation of near-term quantum computers at elevated trigger rates. Many reset schemes are either conditional (depend on the qubit's state) or require flux tunability. This study presents an all-microwave pulsed reset sequence that uses the readout resonator to unconditionally empty a fixed-frequency transmon qubit, and that also reduces the qubit thermal population. This method could be used to increase the repetition rate of a superconducting quantum computer running, for example, variational eigensolvers requiring many measurements.
For larger-scale quantum information processing, qubit reset plays an important role, as the coherent times for qubits are limited. However, previous schemes require either long reset times or a complex pulse calibration technique, leading to low efficiency in qubit reset. Here, we propose a fast and simple reset protocol for superconducting transmon qubits based on the coupler-coupled qubits architecture. In this setup, a mixing pulse is used to transfer the qubit excitation to the combined excitation of a low-qulity coupler and readout resonator, which will quickly decay to their respectively ground states, leading to efficient qubit reset to the ground state. Our numerical results show that the residual population of the qubit’s excited state can be suppressed to 0.04% within 28 ns; the reset time will be 283 ns if photon depletion of the readout resonator is required. Thus, our protocol provides a promising way for the high-efficiency superconducting qubit reset.
Abstract On-demand qubit-state initialization is a prerequisite for quantum computation. We demonstrate such a protocol in a device consisting of fixed-frequency transmon qubits pair-wise coupled via tunable couplers — an architecture that is also compatible with the surface code. We use tunable couplers to transfer any undesired qubit excitation to the readout resonator of the qubit, from which this excitation decays into the feedline. In total, the combination of multi-level qubit reset, leakage reduction, and coupler reset takes only 88 ns to complete. Our reset scheme is fast, unconditional, and achieves fidelities above 99%, thus enabling fixed-frequency qubit architectures as future implementations of fault-tolerant quantum computers.
Qubit initialization is a critical task in quantum computation and communication. Extensive efforts have been made to achieve this with high speed, efficiency and scalability. However, previous approaches have either been measurement-based and required fast feedback, suffered from crosstalk or required sophisticated calibration. Here, we report a fast and high-fidelity reset scheme, avoiding the issues above without any additional chip architecture. By modulating the flux through a transmon qubit, we realize a swap between the qubit and its readout resonator that suppresses the excited state population to 0.08% ± 0.08% within 34 ns (284 ns if photon depletion of the resonator is required). Furthermore, our approach (i) can achieve effective second excited state depletion, (ii) has negligible effects on neighboring qubits, and (iii) offers a way to entangle the qubit with an itinerant single photon, useful in quantum communication applications.
The realization of fault-tolerant quantum computing requires the execution of quantum error-correction (QEC) schemes, to mitigate the fragile nature of qubits. In this context, to ensure the success of QEC, a protocol capable of implementing both qubit reset and leakage reduction is highly desirable together with the ability to perform fast and high-fidelity readout of the qubit s’ quantum states. In this thesis, we tackle both these challenges in an architecture consisting of fixed-frequency transmon qubits pair-wise coupled via tunable couplers. We demonstrate a readout scheme that combines two microwave techniques: applying a shelving technique to the qubits that reduces the contribution of decay error during readout, and a two-tone excitation of the readout resonators to distinguish among qubits’ populations in higher energy levels. We perform single-shot frequency-multiplexed qubit readout, with a 140 ns readout time, and demonstrate 99.5% assignment fidelity for two-state readout and 96.9% for three-state readout - without using a quantum-limited amplifier. We also demonstrate a reset scheme that is fast, unconditional, and achieves fidelities well above 99%, thus enabling fixed-frequency qubit architectures as future implementations of fault-tolerant quantum computers. Our reset protocol uses the tunable couplers to transfer any undesired qubits’ excitation to the readout resonators of the qubits, from which this excitation decays into the feedline. In total, the combination of qubit reset, leakage reduction, and coupler reset takes only 83 ns to complete. This reset protocol also provides a means to both reduce QEC cycle runtime and improve algorithmic fidelity on quantum processors.
Active qubit reset is a key operation in many quantum algorithms, and particularly in quantum error correction. Here, we experimentally demonstrate a reset scheme for a three-level transmon artificial atom coupled to a large bandwidth resonator. The reset protocol uses a microwave-induced interaction between the |f,0⟩ and |g,1⟩ states of the coupled transmon-resonator system, with |g⟩ and |f⟩ denoting the ground and second excited states of the transmon, and |0⟩ and |1⟩ the photon Fock states of the resonator. We characterize the reset process and demonstrate reinitialization of the transmon-resonator system to its ground state in less than 500 ns and with 0.2% residual excitation. Our protocol is of practical interest as it has no additional architectural requirements beyond those needed for fast and efficient single-shot readout of transmons, and does not require feedback.
We demonstrate an active reset protocol in a superconducting quantum circuit. The thermal population on the excited state of a transmon qubit is reduced through driving the transitions between the qubit and an ancillary qubit. Furthermore, we investigate the efficiency of this approach at different temperatures. The result shows that population in the first excited state can be dropped from 7% to 2.55% in 27 ns at 30 mK. The efficiency improves as the temperature increases. Compared to other schemes, our proposal alleviates the requirements for measurement procedure and equipment. With the increase of qubit integration, the fast reset technique holds the promise of improving the fidelity of quantum control.