Magnetic-field-resilient superconducting circuits enable sensing applications and hybrid quantum computing architectures involving spin or topological qubits and electromechanical elements, as well as studying flux noise and quasiparticle loss. We investigate the effect of in-plane magnetic fields up to 1 T on the spectrum and coherence times of thin-film three-dimensional aluminum transmons. Using a copper cavity, unaffected by strong magnetic fields, we can probe solely the effect of magnetic fields on the transmons. We present data on a single-junction and a superconducting-quantum-interference-device (SQUID) transmon that are cooled down in the same cavity. As expected, the transmon frequencies decrease with increasing field, due to suppression of the superconducting gap and a geometric Fraunhofer-like contribution. Nevertheless, the thin-film transmons show strong magnetic field resilience: both transmons display microsecond coherence up to at least 0.65 T, and
T1 remains above $1\phantom{\rule{0.2em}{0ex}}\ensuremath{\mu}\text{s}$ over the entire measurable range. SQUID spectroscopy is feasible up to 1 T, the limit of our magnet. We conclude that thin-film aluminum Josephson junctions are suitable hardware for superconducting circuits in the high-magnetic-field regime.
High-impedance quantum circuit elements consisting of large inductors with small self-capacitance, are important building blocks in quantum circuit elements, with many potential applications. We present thin-film niobium (Nb) spiral resonators exhibiting large geometric inductance, high critical magnetic fields, and high single-photon quality factors. These low-loss geometric inductors can be a compelling alternative to kinetic inductors to create high-impedance superconducting devices for applications that require magnetic fields. We measure the temperature and magnetic-field-dependent losses and find that the high-impedance resonators maintain an intrinsic quality factor above approximately 105 for parallel magnetic fields of up to 1 T. These properties make spiral Nb resonators a promising candidate for quantum devices that require circuit elements with high impedance and magnetic-field resilience. The quantum device we present, incorporating these spirals, is the inductively shunted transmon qudit. The transmon is a widely used superconducting qubit. We develop and optimize a fabrication procedure for transmons, and our primary qubit measurements indicate that we have successfully fabricated qubits. We develop and optimize a fabrication procedure for transmons with Al/AlOx/Al Josephson junctions. For the rest of the circuit, we start with Nb and then shift to Ta due to its superior material properties and the more feasible fabrication procedure it allows using our existing fabrication capabilities. Finally, we introduce the inductively shunted transmon, a transmon shunted by a linear inductor. We show numerically that it could provide highly coherent qudit operations. Then, we propose a simple design to shunt the previously introduced spirals to the transmons.