Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Quantum correlations and measurements

Jan Sperling

Published Jan 1, 2015• 0 citations
Publisher

Abstract

The present thesis is a state of the art report on the characterization techniques and measurement strategies to verify quantum correlations. I will mainly focus on research which has been performed in the theoretical quantum optics group at the University of Rostock during the last few years. The results include theoretical findings and analysis of experimental studies of radiation fields. We investigate the verification of quantum properties, the quantification of these quantum effects, and the characterization of quantum optical detector systems.

DOI
10.18453/rosdok_id00001586

Related papers

Quantum Characterization of Single Photon Detectors

M. G. Mingolla

The research activities described in this thesis have basically an experimental profile, and were realized in the Quantum Optics Laboratories of the Optic Division in the Istituto Nazionale di Ricerca Metrologica (I.N.Ri.M.). The experiments presented here are oriented to the characterization of single- and few-photon detectors calibration, exploiting quantum properties. The first chapter has an introductory character, oriented to the study of nonlinear optics phenomena and focused in the spontaneous parametric down conversion (PDC) process. After the quantization of the free electromagnetic field, we recall the quantum theory of PDC. In the second chapter the Klyshko's two-photon calibration technique is presented and applied to an Avalanche Photo Diode (APD) based single photon counting module. Chapter three is an introduction to quantum measurements and quantum operation theories where the concept of positive-operator valued measurement (POVM) is presented. In chapter four, the quantum characterization of a true photon-number resolving detector (PNRD) based on a transition edge sensor (TES) is presented. In this experiment, the POVM of the TES is reconstructed by realizing a tomography of the detection process's quantum operation, using as a probe a set of known coherent states. In the fifth and last chapter, the POVM of a tree type PNRD is reconstructed exploiting strong quantum correlations of PDC twin beams

•Jan 1, 2014•0 citations

Measurements in Quantum Optics

U. Schilling

This thesis fathoms the possibilities and limitations of measurements in quantum optics. After a short introduction to the general aspects of measurements in quantum mechanics, it presents three examples of a measurement process in concrete applications to quantum optics. For one, while operators describing quantities of interest might have a simple theoretical form, it is often hard to actually implement a measurement of their expectation values experimentally. This situation is encountered in the first part which is devoted to the measurement of quantum statistical properties of a light beam. In contrast to classical optics, these statistics are not fully determined by first- and second-order correlations. Instead, higher-order correlations, usually described by non-Hermitian operators, are necessary to characterize the quantum state completely. A particular example is the N-photon Fock state, for which only a measurement of the Nth-order correlations allows for a full characterization. Here, we present a new method how to measure an important class of Nth-order correlations for arbitrary N in a single spatial mode with two polarizations with limited experimental resources. The second part is again centered around the realization of specific measurement operators for photon correlation measurements. However, in contrast to the previous chapter, these measurements are not an end in their own, but are designed to create specific quantum states as a consequence of the measurement process: A suitable measurement of photons emitted by a number of atoms allows to transfer the atoms into long-lived entangled states. We find that with this method it is possible to entangle two remote atomic qubits to an arbitrary and well-defined degree. Furthermore, we show how to generate two families of quantum states in an arbitrary number of remote atomic qubits: one family consists of all -- symmetric and non-symmetric -- total angular momentum eigenstates in N remote qubits, the other is a family of cluster states. It is also systematically investigated whether the technique of quantum state engineering by projective measurements allows for the creation of any arbitrary state. We find explicit solutions for the case of two and three qubits, while it is shown that no solution exist for N > 6. We conclude the section by proving that with some changes in the setup, this measurement-based quantum state engineering technique allows to create the same states among the scattered photons themselves rather than among the emitting atoms. The last part is devoted to the amount of information one is able to gain about a given system when performing a measurement. The corresponding limits of information are investigated at the example of the duality that arises in a two-way interferometer between the visibility of the interference pattern and the knowledge about the path of the interfering object. We show that there exist correlations between the phase difference the interfering object acquires on its way through the interferometer and the amount of which-way information retrievable from certain observables of the which-way detector. In this way, the which-way information becomes a phase-dependent quantity. In particular, we find that for certain values of the phase shift, the amount of extractable which-way information can be larger than allowed by phase-independent measurement. This property is put to use to find the optimal observable for the which-way detector readout in dependence on the phase of the interfering object. Following this strategy, we are able to gain more which-way information than previously thought possible.

•Oct 24, 2011•0 citations

Experimental and theoretical techniques for quantum-enhanced metrology and optical quantum information processing

Humphreys, Peter

Over the last few decades, quantised excitations of the electromagnetic field have proven to be an ideal system with which to investigate and harness quantum optical phenomena. The techniques developed have enabled fundamental tests of quantum mechanics as well as practical applications in quantum metrology and quantum information processing. Advancing to larger-scale entangled quantum systems will open up new regimes of quantum many-body physics, allowing us to probe the limits of quantum mechanics and enabling truly quantum-enhanced technologies. However, moving towards this goal will require further experimental and theoretical innovations. The work described in this thesis focuses on several different aspects of optical quantum information, but are ultimately all linked by this long-term aim. The first part of this thesis describes a novel method for strain-based active control of quantum optical circuits and a new method for the characterisation of high efficiency detectors. Building on this, I discuss in detail two different fields of quantum optics that stand to benefit from these techniques. I initially consider quantum-enhanced metrology, including work aimed towards demonstrating a truly better-than-classical phase measurement, and a theoretical exploration of multiple-phase estimation. Finally, I focus on linear-optical quantum information processing, exploring in detail the use of time-frequency encodings for quantum computing.

•Jan 1, 2015•0 citations

Characterizations and quantifications of macroscopic quantumness and its implementations using optical fields

Hyunseok Jeong, Minsu Kang, Hyukjoon Kwon

We present a review and discussions on characterizations and quantifications of macroscopic quantum states as well as their implementations and applications in optical systems. We compare and criticize different measures proposed to define and quantify macroscopic quantum superpositions and extend such comparisons to several types of optical quantum states actively considered for experimental implementations within recent research topics.

arXiv:1407.0126•Optics Communications•Jul 21, 2014•39 citations

Measuring and Characterizing Quantum States and Processes

Daniel F. V. James

I will give an introductory overview of current experimental techniques used to characterize the density matrix of a system and the quantum process describing a device, with emphasis on applications in quantum optics.

Conference on Lasers and Electro-Optics•Jan 1, 2010•0 citations

Efficient verification of quantum resources

Harald Wunderlich

In this thesis we present methods to efficiently verify quantum many-body experiments. The first part focuses on the quantitative verification of graph state experiments from simple measurements. In particular, optimal bounds on the fidelity, purity and entropy from stabilizer measurements are derived as well as high-quality bounds on entanglement measures. Furthermore, we show how entanglement may be quantified in spin and cold atom many-body systems using standard experimental techniques only. The scheme requires no assumptions on the state in the laboratory, and a lower bound to the entanglement can be read off directly from the scattering cross section of neutrons deflected from solid state samples or the time-of-flight distribution of cold atoms in optical lattices, respectively. Quantum mechanics offers many interesting properties such as entanglement and non-locality. However, one can easily think of more general correlations than quantum correlations. This gives rise to the question if quantum correlations are the most general allowed in nature? In the last part we propose a new axiom we call macroscopic locality. The idea behind this axiom is that any physical theory should recover classical physics in the continuum limit (i.e., when a large number of particles is involved and our measurement devices fail to resolve discrete particles). We will show that this very intuitive axiom, together with the no-signaling principle, allows to recover many important results in quantum mechanics, like the universality of the Tsirelson bound, or the set of accessible two-point correlators. Moreover, we will provide a complete characterization of the correlations between two distant physical systems that arise out of both axioms and comment on its consistency.

•Jan 1, 2011•0 citations
The present thesis is a state of the art report on the characterization techniques and measurement strategies to verify quantum correlations. I will mainly focus on research which has been performed in the theoretical quantum optics group at the University of Rostock during the last few years. The results include theoretical findings and analysis of experimental studies of radiation fields. We investigate the verification of quantum properties, the quantification of these quantum effects, and the characterization of quantum optical detector systems.
The research activities described in this thesis have basically an experimental profile, and were realized in the Quantum Optics Laboratories of the Optic Division in the Istituto Nazionale di Ricerca Metrologica (I.N.Ri.M.). The experiments presented here are oriented to the characterization of single- and few-photon detectors calibration, exploiting quantum properties. The first chapter has an introductory character, oriented to the study of nonlinear optics phenomena and focused in the spontaneous parametric down conversion (PDC) process. After the quantization of the free electromagnetic field, we recall the quantum theory of PDC. In the second chapter the Klyshko's two-photon calibration technique is presented and applied to an Avalanche Photo Diode (APD) based single photon counting module. Chapter three is an introduction to quantum measurements and quantum operation theories where the concept of positive-operator valued measurement (POVM) is presented. In chapter four, the quantum characterization of a true photon-number resolving detector (PNRD) based on a transition edge sensor (TES) is presented. In this experiment, the POVM of the TES is reconstructed by realizing a tomography of the detection process's quantum operation, using as a probe a set of known coherent states. In the fifth and last chapter, the POVM of a tree type PNRD is reconstructed exploiting strong quantum correlations of PDC twin beams
This thesis fathoms the possibilities and limitations of measurements in quantum optics. After a short introduction to the general aspects of measurements in quantum mechanics, it presents three examples of a measurement process in concrete applications to quantum optics. For one, while operators describing quantities of interest might have a simple theoretical form, it is often hard to actually implement a measurement of their expectation values experimentally. This situation is encountered in the first part which is devoted to the measurement of quantum statistical properties of a light beam. In contrast to classical optics, these statistics are not fully determined by first- and second-order correlations. Instead, higher-order correlations, usually described by non-Hermitian operators, are necessary to characterize the quantum state completely. A particular example is the N-photon Fock state, for which only a measurement of the Nth-order correlations allows for a full characterization. Here, we present a new method how to measure an important class of Nth-order correlations for arbitrary N in a single spatial mode with two polarizations with limited experimental resources. The second part is again centered around the realization of specific measurement operators for photon correlation measurements. However, in contrast to the previous chapter, these measurements are not an end in their own, but are designed to create specific quantum states as a consequence of the measurement process: A suitable measurement of photons emitted by a number of atoms allows to transfer the atoms into long-lived entangled states. We find that with this method it is possible to entangle two remote atomic qubits to an arbitrary and well-defined degree. Furthermore, we show how to generate two families of quantum states in an arbitrary number of remote atomic qubits: one family consists of all -- symmetric and non-symmetric -- total angular momentum eigenstates in N remote qubits, the other is a family of cluster states. It is also systematically investigated whether the technique of quantum state engineering by projective measurements allows for the creation of any arbitrary state. We find explicit solutions for the case of two and three qubits, while it is shown that no solution exist for N > 6. We conclude the section by proving that with some changes in the setup, this measurement-based quantum state engineering technique allows to create the same states among the scattered photons themselves rather than among the emitting atoms. The last part is devoted to the amount of information one is able to gain about a given system when performing a measurement. The corresponding limits of information are investigated at the example of the duality that arises in a two-way interferometer between the visibility of the interference pattern and the knowledge about the path of the interfering object. We show that there exist correlations between the phase difference the interfering object acquires on its way through the interferometer and the amount of which-way information retrievable from certain observables of the which-way detector. In this way, the which-way information becomes a phase-dependent quantity. In particular, we find that for certain values of the phase shift, the amount of extractable which-way information can be larger than allowed by phase-independent measurement. This property is put to use to find the optimal observable for the which-way detector readout in dependence on the phase of the interfering object. Following this strategy, we are able to gain more which-way information than previously thought possible.
Over the last few decades, quantised excitations of the electromagnetic field have proven to be an ideal system with which to investigate and harness quantum optical phenomena. The techniques developed have enabled fundamental tests of quantum mechanics as well as practical applications in quantum metrology and quantum information processing. Advancing to larger-scale entangled quantum systems will open up new regimes of quantum many-body physics, allowing us to probe the limits of quantum mechanics and enabling truly quantum-enhanced technologies. However, moving towards this goal will require further experimental and theoretical innovations. The work described in this thesis focuses on several different aspects of optical quantum information, but are ultimately all linked by this long-term aim. The first part of this thesis describes a novel method for strain-based active control of quantum optical circuits and a new method for the characterisation of high efficiency detectors. Building on this, I discuss in detail two different fields of quantum optics that stand to benefit from these techniques. I initially consider quantum-enhanced metrology, including work aimed towards demonstrating a truly better-than-classical phase measurement, and a theoretical exploration of multiple-phase estimation. Finally, I focus on linear-optical quantum information processing, exploring in detail the use of time-frequency encodings for quantum computing.
In this thesis we present methods to efficiently verify quantum many-body experiments. The first part focuses on the quantitative verification of graph state experiments from simple measurements. In particular, optimal bounds on the fidelity, purity and entropy from stabilizer measurements are derived as well as high-quality bounds on entanglement measures. Furthermore, we show how entanglement may be quantified in spin and cold atom many-body systems using standard experimental techniques only. The scheme requires no assumptions on the state in the laboratory, and a lower bound to the entanglement can be read off directly from the scattering cross section of neutrons deflected from solid state samples or the time-of-flight distribution of cold atoms in optical lattices, respectively. Quantum mechanics offers many interesting properties such as entanglement and non-locality. However, one can easily think of more general correlations than quantum correlations. This gives rise to the question if quantum correlations are the most general allowed in nature? In the last part we propose a new axiom we call macroscopic locality. The idea behind this axiom is that any physical theory should recover classical physics in the continuum limit (i.e., when a large number of particles is involved and our measurement devices fail to resolve discrete particles). We will show that this very intuitive axiom, together with the no-signaling principle, allows to recover many important results in quantum mechanics, like the universality of the Tsirelson bound, or the set of accessible two-point correlators. Moreover, we will provide a complete characterization of the correlations between two distant physical systems that arise out of both axioms and comment on its consistency.