Over the last few decades, quantised excitations of the electromagnetic field have proven to be an ideal system with which to investigate and harness quantum optical phenomena. The techniques developed have enabled fundamental tests of quantum mechanics as well as practical applications in quantum metrology and quantum information processing. Advancing to larger-scale entangled quantum systems will open up new regimes of quantum many-body physics, allowing us to probe the limits of quantum mechanics and enabling truly quantum-enhanced technologies. However, moving towards this goal will require further experimental and theoretical innovations. The work described in this thesis focuses on several different aspects of optical quantum information, but are ultimately all linked by this long-term aim. The first part of this thesis describes a novel method for strain-based active control of quantum optical circuits and a new method for the characterisation of high efficiency detectors. Building on this, I discuss in detail two different fields of quantum optics that stand to benefit from these techniques. I initially consider quantum-enhanced metrology, including work aimed towards demonstrating a truly better-than-classical phase measurement, and a theoretical exploration of multiple-phase estimation. Finally, I focus on linear-optical quantum information processing, exploring in detail the use of time-frequency encodings for quantum computing.
Over the last few decades, quantised excitations of the electromagnetic field have proven to be an ideal system with which to investigate and harness quantum optical phenomena. The techniques developed have enabled fundamental tests of quantum mechanics as well as practical applications in quantum metrology and quantum information processing. Advancing to larger-scale entangled quantum systems will open up new regimes of quantum many-body physics, allowing us to probe the limits of quantum mechanics and enabling truly quantum-enhanced technologies. However, moving towards this goal will require further experimental and theoretical innovations. The work described in this thesis focuses on several different aspects of optical quantum information, but are ultimately all linked by this long-term aim. The first part of this thesis describes a novel method for strain-based active control of quantum optical circuits and a new method for the characterisation of high efficiency detectors. Building on this, I discuss in detail two different fields of quantum optics that stand to benefit from these techniques. I initially consider quantum-enhanced metrology, including work aimed towards demonstrating a truly better-than-classical phase measurement, and a theoretical exploration of multiple-phase estimation. Finally, I focus on linear-optical quantum information processing, exploring in detail the use of time-frequency encodings for quantum computing.
Measurements on states of light underpins the entire fields of classical and quantum optics. Without measurement we are unable to gain any information about the light we are studying or about the processes it has undergone. The property of the density matrix of light prior to measurement that we want to measure also relies heavily on the measurement technique we employ. We can use a single-photon detector to measure the particle nature of light--the photon--the discrete quanta of the electromagnetic field. We can conversely measure the wave nature of the light field by making phase-sensitive measurements. In this thesis, we shall explore some advanced implementations and applications of these measurement schemes. First, we shall focus on a specific type of single-photon detector: the Superconducting-Nanowire Single-Photon Detector. We will first consider the integration of these detectors on optical waveguides, and discuss their optical characterisation. Then we will consider a practical application of these detectors by investigating a method to perform broadband spectroscopy with a single detector. We shall then progress to phase-sensitive measurements, and consider the intermediate regime between measuring the wave-like and particle-like nature of light. First we will perform a fundamental investigation of the transition between both measurement regimes. We will see how varying the phase reference itself allows us to tune between both regimes. Following this we will discuss an application of this intermediate regime, by considering an experimental setup to perform state tomography with a weak phase reference. The final consideration of this thesis will be a theoretical benchmarking scheme for a practical application of quantum optics. The manipulation of certain quantum states of light followed by a photon-number measurement can have practical applications in a variety of fields, and therefore validating the results is of extreme importance. On this final topic, we will discuss an experimentally friendly technique to benchmark the output of such measurements by considering smaller subsystems, and the practical requirements of this technique.
Quantum technologies harness the properties of controlled quantum mechanical systems for applications in computation, communication and metrology, and enable us to further our understanding of fundamental physics. Quantum hardware is designed to manipulate complex and fragile many-particle quantum states, which requires exquisite control machinery, advanced software and near-complete isolation from the surrounding environment. With sufficient capabilities, quantum computers with large registers of quantum bits will perform classically intractable calculations such as quantum chemistry simulations. Quantum key distribution will provide completely secure communications across the world and quantum metrology will enable measurement precision beyond today's capabilities. While quantum technologies are far from surpassing classical hardware today, the vision and potential impact has sparked a world-wide research effort, both theoretical and experimental, to develop a quantum computer. The most sophisticated current quantum technologies have control over small numbers of quantum bits and are limited by environmental decoherence processes. While progress in developing quantum hardware is ongoing, designing and demonstrating new algorithms and protocols for quantum information is a thriving research field. Photonics provides an ideal platform for small-scale proof-of-concept quantum experiments, which are the focus of this thesis. In the coming decades, we will see the realisation of quantum hardware capable of applications that outperform any classical computer. In this thesis, I present several protocols and algorithms for quantum information science and technology, which are implemented in quantum photonic experiments. The applications of these works include robust quantum tomography, quantum state relocation, quantum enhanced data recovery and probing fundamental causality in quantum mechanics. The works presented here are based on two photon experiments from a prototypical spontaneous parametric down-conversion source, which provides an excellent test-bed for quantum information experiments. Photons can be used to encode quantum information in a range of different degrees of freedom. This versatility, along with compatibility with existing technology gives photonics a great advantage in the development of quantum hardware.
Photons have proven to be an effective test-bed for the fundamental concepts and elements of quantum-enhanced technologies. As systems become increasingly complex, however, practical considerations make the traditional approach of bulk optics and free-space propagation progressively more difficult. The major obstacles are the physical space necessary to realise and operate such a complex system, its stability, and maintaining low losses. In order to address these issues, quantum optical technologies can take a cue from their classical counterparts and look towards an integrated architecture to provide miniaturisation, greatly enhanced stability, less alignment, and low loss interfaces between different system components. In this thesis the feasibility of chip-based waveguides as a platform for metrology and information processing will be explored. In Part I, the necessary criteria for a metrology system to out-perform its classical counterpart will be investigated. It will be found that loss is a major barrier to this aim and, critically, that it is unlikely to have been achieved to date by any experiment which consumes resources of a fixed photon number. The issue of loss will be addressed by developing a scalable heralded source of a class of entangled photonic states which are both robust to losses and practically feasible to prepare. A novel tomographic technique will be developed to characterize these states and it will be explicitly demonstrated how it is possible to beat some bounds on classical performance without being able to out-perform a comparable classical system. Finally, a proof of principle demonstration of a waveguide-based interferometer with an integrated phase-shifter will be undertaken. It will be shown that the device preserves quantum interference, making it suitable for use in quantum-enhanced metrology applications. In Part II, integrated optics in the context of information processing will be discussed. First, a novel characterization technique will be developed which enables the behaviour of complex circuits to be predicted. The technique is independent of loss in the device being characterized. A method of simulating these circuits will be outlined that takes advantage of the computational speed-up available from parallelisation and sparse matrix operations. A key increase in complexity for integrated photonic systems will be demonstrated by showing quantum interference of three photons from two separate sources in eight spatial modes. The resulting interference has a visibility which beats all possible classical interference visibilities for similar circuits. Finally, a fully integrated waveguide-coupled photon-number-resolving detector will be developed and demonstrated. This proof of concept demonstration will show good resolution of different photon number events. The device will be modelled and routes to high efficiency operation will be explored.
Quantum states and measurements are two central physical objects in the theory of quantum mechanics. The preparation, control and measurement of quantum states lies at the heart of modern quantum information processing protocols ranging from secure communication to quantum computation and precision sensing. And yet, the reliable operation of these advanced protocols ultimately rests on a far more essential prerequisite - our ability to calibrate, certify and benchmark the quantum states we prepare and the quantum measurements we perform. Quantum information theory provides a natural framework for these tasks, meaningfully connecting the resources we expend for characterisation with the accuracy and precision we can expect in return. While decades of advances in quantum information have refined our understanding of quantum characterisation and sharpened our practical ability to calibrate with enhanced precision, important questions about the fundamental limits of quantum characterisation remain unanswered. Although incorporating entanglement at the measurement stage is known to enhance the estimation of unknown quantum states, the extent of this improvement remains poorly understood. This leaves open a fundamental question on the utility of complex entangling measurement strategies, impeding progress towards bridging the significant gap between practically achievable precision and the ultimate theoretical quantum limit. Complementary to quantum state estimation, which is relatively well-established in theory and practice, the characterisation of quantum measurements lacks a rigorous information-theoretic foundation, leading to a dearth of principled benchmarks and provably optimal strategies despite growing experimental interest. This thesis develops and applies information-theoretic tools to answer questions in quantum characterisation, with an eye to enabling practical improvements beyond current techniques in the field. First, we introduce a computable measure of entanglement enhancement for quantum state estimation and study its variation across general multi-parameter estimation problems for higher-dimensional quantum states. We show that the entanglement enhancement is maximised for full qudit state tomography but grows only linearly with system dimension even when allowing an asymptotically large number of entangling operations. Our proposed tight upper bound to entanglement enhancement therefore constitutes a strong limitation on the utility of such entangling measurements. Next, we formulate the dual problem of quantum detector estimation, developing a comprehensive framework for maximally precise calibration centred around a newly introduced quantity - the detector quantum Fisher information. This information-theoretic measure stipulates the ultimate precision attainable for measurement calibration and identifies the optimal input states that achieve this precision. Further, our framework enables the first provably optimal detector estimation experiment and reveals the scope for entanglement-based enhancements, thereby placing measurement characterisation on equal footing with state characterisation. Considered together, these results suggest two contrasting conclusions about quantum characterisation. On the one hand, they show that for quantum state estimation, increasingly powerful entangling measurements offer only diminishing returns at the ultimate precision limit. On the other hand, they highlight practical quantum advantages available for detector estimation by providing a framework that can improve calibration performance and guide future experimental design. More broadly, these results complete and advance the triad of state, process, and detector characterisation, positioning quantum information measures as not merely abstract bounds, but practical guides for deciding when complex quantum resources are genuinely worth deploying and where near-term quantum advantages are most likely to be realised.
In this thesis, I present experimental and theoretical work which assesses and develops a range of tools that are required for performing quantum information processing, particularly in photonic systems. I investigate the three degrees of freedom of a single photon—its polarisation, spatialmomentum and time-frequency distributions. For polarisation, I show that using wave plates to implement arbitrary, single-qubit rotations is more complicated than is commonly appreciated. In the spatial-momentum and time-frequency domains, I develop ways to perform tomographic analysis of quantum states, and I report the first demonstrations of these techniques. In the time-frequency domain, the tomography technique utilises entanglement in the photon polarisation as a resource to store and provide access to the time-frequency information. In my first two experiments, I use spontaneous parametric down-conversion to produce entanglement between pairs of single photons in all three degrees of freedom. I demonstrate the first characterisation of entanglement in spatial modes and the time-frequency domain, the first quantitative measurement of entangled qutrit states, and the highest quality entangled states yet measured in both polarisation and spatial modes. I also report the first realisation of complete hyperentanglement, and a full, black-box tomography of a 36-dimensional two-photon state—the largest system to be characterised in this way to date. In my final experiment, I model and implement a new architecture for a controlled-Z gate which is much simpler to align than previous implementations. This gate requires only one non-classical interference condition, the visibility of which is the main limitation to its performance. I show that the gate operates effectively as a means of both creating entanglement and discriminating between the four elements in a basis of maximally entangled, Bell-type states. Indeed, its observed performance as a Bell analyser would be sufficient to build a quantum state teleporter which would guarantee that the recipient would be left with a better copy of an unknown input state than any eavesdropper. In a series of numerical simulations, I investigate some of the practicalities that arise when using tomographic reconstruction techniques, including how to estimate errors, which measurements to make and what is actually the optimal reconstruction. In particular, I show that tomographies perform better when based on the results from over-complete sets of measurements. Finally, I discuss the important issue of how to compare two processes, particularly when trying to assess the quality of a measured process by comparing it to some expected ideal. Judging possible candidate measures against a set of experimentally and theoretically motivated
Quantum metrology is an auspicious discipline of quantum information which is currently witnessing a surge of experimental breakthroughs and theoretical developments. The main goal of quantum metrology is to estimate unknown parameters as accurately as possible. By using quantum resources as probes, it is possible to attain a measurement precision that would be otherwise impossible using the best classical strategies. For example, with respect to the task of phase estimation, the maximum precision (the Heisenberg limit) is a quadratic gain in precision with respect to the best classical strategies. Of course, quantum metrology is not the sole quantum technology currently undergoing advances. The theme of this thesis is exploring how quantum metrology can be enhanced with other quantum techniques when appropriate, namely: graph states, error correction and cryptography.