Photons have proven to be an effective test-bed for the fundamental concepts and elements of quantum-enhanced technologies. As systems become increasingly complex, however, practical considerations make the traditional approach of bulk optics and free-space propagation progressively more difficult. The major obstacles are the physical space necessary to realise and operate such a complex system, its stability, and maintaining low losses. In order to address these issues, quantum optical technologies can take a cue from their classical counterparts and look towards an integrated architecture to provide miniaturisation, greatly enhanced stability, less alignment, and low loss interfaces between different system components. In this thesis the feasibility of chip-based waveguides as a platform for metrology and information processing will be explored. In Part I, the necessary criteria for a metrology system to out-perform its classical counterpart will be investigated. It will be found that loss is a major barrier to this aim and, critically, that it is unlikely to have been achieved to date by any experiment which consumes resources of a fixed photon number. The issue of loss will be addressed by developing a scalable heralded source of a class of entangled photonic states which are both robust to losses and practically feasible to prepare. A novel tomographic technique will be developed to characterize these states and it will be explicitly demonstrated how it is possible to beat some bounds on classical performance without being able to out-perform a comparable classical system. Finally, a proof of principle demonstration of a waveguide-based interferometer with an integrated phase-shifter will be undertaken. It will be shown that the device preserves quantum interference, making it suitable for use in quantum-enhanced metrology applications. In Part II, integrated optics in the context of information processing will be discussed. First, a novel characterization technique will be developed which enables the behaviour of complex circuits to be predicted. The technique is independent of loss in the device being characterized. A method of simulating these circuits will be outlined that takes advantage of the computational speed-up available from parallelisation and sparse matrix operations. A key increase in complexity for integrated photonic systems will be demonstrated by showing quantum interference of three photons from two separate sources in eight spatial modes. The resulting interference has a visibility which beats all possible classical interference visibilities for similar circuits. Finally, a fully integrated waveguide-coupled photon-number-resolving detector will be developed and demonstrated. This proof of concept demonstration will show good resolution of different photon number events. The device will be modelled and routes to high efficiency operation will be explored.
Photons have proven to be an effective test-bed for the fundamental concepts and elements of quantum-enhanced technologies. As systems become increasingly complex, however, practical considerations make the traditional approach of bulk optics and free-space propagation progressively more difficult. The major obstacles are the physical space necessary to realise and operate such a complex system, its stability, and maintaining low losses. In order to address these issues, quantum optical technologies can take a cue from their classical counterparts and look towards an integrated architecture to provide miniaturisation, greatly enhanced stability, less alignment, and low loss interfaces between different system components. In this thesis the feasibility of chip-based waveguides as a platform for metrology and information processing will be explored. In Part I, the necessary criteria for a metrology system to out-perform its classical counterpart will be investigated. It will be found that loss is a major barrier to this aim and, critically, that it is unlikely to have been achieved to date by any experiment which consumes resources of a fixed photon number. The issue of loss will be addressed by developing a scalable heralded source of a class of entangled photonic states which are both robust to losses and practically feasible to prepare. A novel tomographic technique will be developed to characterize these states and it will be explicitly demonstrated how it is possible to beat some bounds on classical performance without being able to out-perform a comparable classical system. Finally, a proof of principle demonstration of a waveguide-based interferometer with an integrated phase-shifter will be undertaken. It will be shown that the device preserves quantum interference, making it suitable for use in quantum-enhanced metrology applications. In Part II, integrated optics in the context of information processing will be discussed. First, a novel characterization technique will be developed which enables the behaviour of complex circuits to be predicted. The technique is independent of loss in the device being characterized. A method of simulating these circuits will be outlined that takes advantage of the computational speed-up available from parallelisation and sparse matrix operations. A key increase in complexity for integrated photonic systems will be demonstrated by showing quantum interference of three photons from two separate sources in eight spatial modes. The resulting interference has a visibility which beats all possible classical interference visibilities for similar circuits. Finally, a fully integrated waveguide-coupled photon-number-resolving detector will be developed and demonstrated. This proof of concept demonstration will show good resolution of different photon number events. The device will be modelled and routes to high efficiency operation will be explored.
Quantum information science aims to harness uniquely quantum mechanical properties to enhance measurement and information technologies, and to explore fundamental aspects of quantum physics. Of the various approaches to quantum computing [1], photons are particularly appealing for their low-noise properties and ease of manipulation at the single qubit level [2]. Encoding quantum information in photons is also an appealing approach to quantum communication, metrology (eg. [3]), measurement (eg. [4]) and other quantum technologies [5]. However, the implementation of optical quantum circuits with bulk optics has reached practical limits. We have developed an integrated waveguide approach to photonic quantum circuits for high performance, miniaturisation and scalability [6]. Here we report high-fidelity silica-on-silicon integrated optical realisations of key quantum photonic circuits, including two-photon quantum interference and a controlled-NOT logic gate [7]. We have demonstrated controlled manipulation of up to four photons on-chip, including high-fidelity single qubit operations, using a lithographically patterned resistive phase shifter [8]. We have used this architecture to implement a small-scale compiled version of Shorʼs quantum factoring algorithm [9] and demonstrated heralded generation of tuneable four photon entangled states from a six photon input [10]. We have combined waveguide photonic circuits with superconducting single photon detectors [11]. We describe complex quantum interference behaviour in multi-mode interference devices with up to eight inputs and outputs [12], and quantum walks of correlated particles in arrays of coupled waveguides [13]. Finally, we give an overview of our recent work on fundamental aspects of quantum measurement [14,15] and single photon sources [16,17].
Building complex quantum systems has the potential to reveal phenomena that cannot be studied using classical simulation. Photonics has proven to be an effective test-bed for the investigation of such quantum-enhanced technologies, however, the proliferation of bulk optical components is unlikely to be a scalable route towards building more complex devices. Instead, the miniaturisation, inherent phase stability and trivial alignment afforded by integrated photonic systems has been shown to be a promising alternative. In the first half of this thesis, we describe experiments exploiting the quantum interference of three single photons on a reconfigurable integrated photonic chip. We develop a low-loss source of single photons and introduce a low-loss silica-on-silicon waveguide architecture which enables us to show the first genuine quantum interference of three single photons on an integrated platform. A loss-tolerant, element-wise characterisation scheme is developed along with a statistical test to verify that this multi-photon circuit behaves as expected. We then make use of this three-photon interference to detail the first proof-of-principle demonstration of a new intermediate model of quantum computation called boson sampling. Finally, we perform an on-chip demonstration of the quantum teleportation protocol where all key parts --- entanglement preparation, Bell-state analysis and quantum state tomography --- are performed on a reconfigurable photonic chip. The element-wise characterisation scheme developed earlier is shown to be critical to mitigate fabricated component errors. We develop a theoretical model to account for all sources of possible error in the circuit and find good agreement with the measured teleported state fidelities, which exceed the average teleportation fidelity possible with a classical device. We identify the elements of this error budget relevant to scaling and propose improvements to chip characterisation and fabrication in order to achieve high fidelity operation. In the second half, we discuss the use of high efficiency superconducting transition edge sensors in enabling quantum experiments using more photons. We detail the installation and characterisation of these detectors in a new lab in Oxford. We achieve good photon number-resolution and high-efficiency operation. Work to integrate these detectors on the silica-on-silicon waveguide architecture is discussed and we detail the optical and thermal device modelling performed to optimise the on-chip detection efficiency. New, on-chip detectors, fabricated according to this design are shown to operate as expected and achieve high-efficiency and good energy resolution.
Photonics has consistently played an important role in the investigation of quantum-enhanced technologies and the corresponding study of fundamental quantum phenomena. The majority of these experiments have relied on the free space propagation of light between bulk optical components. This relatively simple and flexible approach often provides the fastest route to small proof-of-principle demonstrations. Unfortunately, such experiments occupy significant space, are not inherently phase stable, and can exhibit significant scattering loss which severely limits their use. Integrated photonics offers a scalable route to building larger quantum states of light by surmounting these barriers. In the first half of this thesis, we describe the operation of on-chip heralded sources of single photons. Loss plays a critical role in determining whether many quantum technologies have any hope of outperforming their classical analogues. Minimizing loss leads us to choose Spontaneous Four-Wave Mixing (SFWM) in a silica waveguide for our source design; silica exhibits extremely low scattering loss and emission can be efficiently coupled to the silica chips and fibers that are widely used in quantum optics experiments. We show there is a straightforward route to maximizing heralded photon purity by minimizing the spectral correlations between emitted photon pairs. Fabrication of identical sources on a large scale is demonstrated by a series of high-visibility interference experiments. This architecture offers a promising route to the construction of nonclassical states of higher photon number by operating many on-chip SFWM sources in parallel. In the second half, we detail one of the first proof-of-principle demonstrations of a new intermediate model of quantum computation called boson sampling. While likely less powerful than a universal quantum computer, boson sampling machines appear significantly easier to build and may allow the first convincing demonstration of a quantum-enhanced computation in the not-distant future. Boson sampling requires a large interferometric network which are challenging to build with bulk optics, we therefore perform our experiment on-chip. We model the effect of loss on our postselected experiment and implement a circuit characterization technique that accounts for this loss. Experimental imperfections, including higher-order emission from our photon pair sources and photon distinguishability, are modeled and found to explain the sampling error observed in our experiment.
Quantum information science aims to harness uniquely quantum mechanical properties to enhance measurement and information technologies, and to explore fundamental aspects of quantum physics. Of the various approaches to quantum computing [1], photons are particularly appealing for their low-noise properties and ease of manipulation at the single qubit level [2,3]. Encoding quantum information in photons is also an appealing approach to quantum communication, metrology (eg. [4]), measurement (eg. [5]) and other quantum technologies [6]. However, the implementation of optical quantum circuits with bulk optics has reached practical limits. We have developed an integrated waveguide approach to photonic quantum circuits for high performance, miniaturization and scalability [7]. Here we report high-fidelity silica-on-silicon integrated optical realizations of key quantum photonic circuits, including two-photon quantum interference and a controlled-NOT logic gate [8]. We have demonstrated controlled manipulation of up to four photons on-chip, including highfidelity single qubit operations, using a lithographically patterned resistive phase shifter [9]. We have used this architecture to implement a small-scale compiled version of Shor's quantum factoring algorithm [10], demonstrated heralded generation of tunable four photon entangled states from a six photon input [11], a reconfigurable two-qubit circuit [12], and combined waveguide photonic circuits with superconducting single photon detectors [13]. We describe complex quantum interference behavior in multi-mode interference devices with up to eight inputs and outputs [14], and quantum walks of correlated particles in arrays of coupled waveguides [15]. Finally, we give an overview of our recent work on fundamental aspects of quantum measurement [16,17] and diamond [18,19] and nonlinear [20,21] photon sources.
Quantum optics has successfully been used to test fundamental principles in quantum physics and to demonstrate the potential of quantum-enhanced technologies. Linear quantum optics, in which large quantum states of light are produced by optical interference of smaller quantum states, has proved to be particularly fruitful. Further progress will rely both on developing improved experimental tools to manipulate and measure quantum light, and on expanding and refining the range of applications of these technologies. This thesis presents our contributions towards both of these endeavours. We first focus on some of the components necessary for linear quantum optics, starting with the requirement for reconfigurable interference between several optical modes. We propose a novel design for interferometers that satisfy this requirement, which is based on a new mathematical decomposition of unitary matrices used to describe optical interference. We show that our design is more efficient than previously known designs. We also experimentally demonstrate a modular approach to building these devices, which is based on the assembly of multiple UV-written integrated photonic chips. These chips are characterised, and three of them are assembled into a structure shown to enable a wide range of optical transformations. We then study methods of photon detection, showing how photon detectors can be calibrated and discussing the operation of superconducting photon number resolving transition edge sensors. Next, we study two applications of linear optics. We examine the applicability of a proposal for simulating molecular spectroscopy using quantum optics in the presence of experimental imperfections. Our findings are illustrated with a proof of principle experiment in which we simulate part of the vibronic spectrum of the tropolone molecule. Finally, we study a class of optical devices, known as optical Ising machines, that has been shown to find solutions to difficult combinatorial problems. Describing the optical pulses in these devices in phase space as Gaussian quasi-probability distributions that evolve stochastically, we analyse the computational mechanism of these machines and show in theory that they can be simplified without affecting their performance.
This thesis focuses on optical quantum information processing in two parts. The first part focuses on photonic hardware. Large-scale photonic experiments require the generation of many indistinguishable single photons simultaneously. Traditionally, such photons are generated by spontaneous parametric down-conversion (SPDC). However, the suitability of such sources to generate many photons. We have identified the maximum limits of how many photons SPDC sources can be made. A second requirement of large-scale quantum photonics is having a network with many optical modes while maintaining low optical loss. Such networks are currently lacking. Therefore we introduce the possibility to use a rough surface scatterer for a quantum advantage experiment. Although such a network is far from universal, it has many modes and low loss. Another approach is to use integrated quantum photonics, which is fully reconfigurable and is a promising way of scaling up to large systems in an industrial setting. We have characterized a programmable low-loss 12-mode silicon nitride (SiN). In the second part of the thesis, various proof-of-principle quantum experiments were performed on a 12 mode SiN integrated photonic chip. Firstly, it was shown that these networks can be used to simulate wave propagation through disordered networks. This unconventional approach allows for full experimental access and control to the physical process, which is essential for such experiments. Secondly, we introduced a semi-device independent witness protocol that can in-situ verify the indistinguishability of photons on the chip, which is an essential tool to have when the system size increases and can no longer be efficiently simulated classically. The last experiment is a quantum simulation where we show how a pure quantum state locally thermalizes in a closed system.