Photonics has consistently played an important role in the investigation of quantum-enhanced technologies and the corresponding study of fundamental quantum phenomena. The majority of these experiments have relied on the free space propagation of light between bulk optical components. This relatively simple and flexible approach often provides the fastest route to small proof-of-principle demonstrations. Unfortunately, such experiments occupy significant space, are not inherently phase stable, and can exhibit significant scattering loss which severely limits their use. Integrated photonics offers a scalable route to building larger quantum states of light by surmounting these barriers. In the first half of this thesis, we describe the operation of on-chip heralded sources of single photons. Loss plays a critical role in determining whether many quantum technologies have any hope of outperforming their classical analogues. Minimizing loss leads us to choose Spontaneous Four-Wave Mixing (SFWM) in a silica waveguide for our source design; silica exhibits extremely low scattering loss and emission can be efficiently coupled to the silica chips and fibers that are widely used in quantum optics experiments. We show there is a straightforward route to maximizing heralded photon purity by minimizing the spectral correlations between emitted photon pairs. Fabrication of identical sources on a large scale is demonstrated by a series of high-visibility interference experiments. This architecture offers a promising route to the construction of nonclassical states of higher photon number by operating many on-chip SFWM sources in parallel. In the second half, we detail one of the first proof-of-principle demonstrations of a new intermediate model of quantum computation called boson sampling. While likely less powerful than a universal quantum computer, boson sampling machines appear significantly easier to build and may allow the first convincing demonstration of a quantum-enhanced computation in the not-distant future. Boson sampling requires a large interferometric network which are challenging to build with bulk optics, we therefore perform our experiment on-chip. We model the effect of loss on our postselected experiment and implement a circuit characterization technique that accounts for this loss. Experimental imperfections, including higher-order emission from our photon pair sources and photon distinguishability, are modeled and found to explain the sampling error observed in our experiment.
Photonics has consistently played an important role in the investigation of quantum-enhanced technologies and the corresponding study of fundamental quantum phenomena. The majority of these experiments have relied on the free space propagation of light between bulk optical components. This relatively simple and flexible approach often provides the fastest route to small proof-of-principle demonstrations. Unfortunately, such experiments occupy significant space, are not inherently phase stable, and can exhibit significant scattering loss which severely limits their use. Integrated photonics offers a scalable route to building larger quantum states of light by surmounting these barriers. In the first half of this thesis, we describe the operation of on-chip heralded sources of single photons. Loss plays a critical role in determining whether many quantum technologies have any hope of outperforming their classical analogues. Minimizing loss leads us to choose Spontaneous Four-Wave Mixing (SFWM) in a silica waveguide for our source design; silica exhibits extremely low scattering loss and emission can be efficiently coupled to the silica chips and fibers that are widely used in quantum optics experiments. We show there is a straightforward route to maximizing heralded photon purity by minimizing the spectral correlations between emitted photon pairs. Fabrication of identical sources on a large scale is demonstrated by a series of high-visibility interference experiments. This architecture offers a promising route to the construction of nonclassical states of higher photon number by operating many on-chip SFWM sources in parallel. In the second half, we detail one of the first proof-of-principle demonstrations of a new intermediate model of quantum computation called boson sampling. While likely less powerful than a universal quantum computer, boson sampling machines appear significantly easier to build and may allow the first convincing demonstration of a quantum-enhanced computation in the not-distant future. Boson sampling requires a large interferometric network which are challenging to build with bulk optics, we therefore perform our experiment on-chip. We model the effect of loss on our postselected experiment and implement a circuit characterization technique that accounts for this loss. Experimental imperfections, including higher-order emission from our photon pair sources and photon distinguishability, are modeled and found to explain the sampling error observed in our experiment.
Building complex quantum systems has the potential to reveal phenomena that cannot be studied using classical simulation. Photonics has proven to be an effective test-bed for the investigation of such quantum-enhanced technologies, however, the proliferation of bulk optical components is unlikely to be a scalable route towards building more complex devices. Instead, the miniaturisation, inherent phase stability and trivial alignment afforded by integrated photonic systems has been shown to be a promising alternative. In the first half of this thesis, we describe experiments exploiting the quantum interference of three single photons on a reconfigurable integrated photonic chip. We develop a low-loss source of single photons and introduce a low-loss silica-on-silicon waveguide architecture which enables us to show the first genuine quantum interference of three single photons on an integrated platform. A loss-tolerant, element-wise characterisation scheme is developed along with a statistical test to verify that this multi-photon circuit behaves as expected. We then make use of this three-photon interference to detail the first proof-of-principle demonstration of a new intermediate model of quantum computation called boson sampling. Finally, we perform an on-chip demonstration of the quantum teleportation protocol where all key parts --- entanglement preparation, Bell-state analysis and quantum state tomography --- are performed on a reconfigurable photonic chip. The element-wise characterisation scheme developed earlier is shown to be critical to mitigate fabricated component errors. We develop a theoretical model to account for all sources of possible error in the circuit and find good agreement with the measured teleported state fidelities, which exceed the average teleportation fidelity possible with a classical device. We identify the elements of this error budget relevant to scaling and propose improvements to chip characterisation and fabrication in order to achieve high fidelity operation. In the second half, we discuss the use of high efficiency superconducting transition edge sensors in enabling quantum experiments using more photons. We detail the installation and characterisation of these detectors in a new lab in Oxford. We achieve good photon number-resolution and high-efficiency operation. Work to integrate these detectors on the silica-on-silicon waveguide architecture is discussed and we detail the optical and thermal device modelling performed to optimise the on-chip detection efficiency. New, on-chip detectors, fabricated according to this design are shown to operate as expected and achieve high-efficiency and good energy resolution.
A key obstacle to the experimental realization of many photonic quantum-enhanced technologies is the lack of low-loss sources of single photons in pure quantum states. We demonstrate a promising solution: generation of heralded single photons in a silica photonic chip by spontaneous four-wave mixing. A heralding efficiency of 40%, corresponding to a preparation efficiency of 80% accounting for detector performance, is achieved due to efficient coupling of the low-loss source to optical fibers. A single photon purity of 0.86 is measured from the source number statistics without narrow spectral filtering, and confirmed by direct measurement of the joint spectral intensity. We calculate that similar high-heralded-purity output can be obtained from visible to telecom spectral regions using this approach. On-chip silica sources can have immediate application in a wide range of single-photon quantum optics applications which employ silica photonics.
Heralded single photon sources, based on probabilistic non-linear interactions, currently serve as the de-facto standard for performing multi-photon quantum interference experiments. Already, interesting phenomena may be explored with a handful of such sources [1], whilst in the future, large arrays of identical sources could be multiplexed with a switching network to achieve a truly scalable, near-deterministic emission [2]. However, fabricating such a large number of indistinguishable, pure, heralded single photon sources, operating with low-loss, remains an open challenge. Spontaneous four-wave mixing (SFWM) in a silica waveguide is a promising route to building such a source. The low-loss and excellent mode-matching to optical fibre of silica waveguides allows high preparation efficiency. Guided-wave photonics also allows the precise control of the optical modes needed to engineer emission of photons into a single pair of Schmidt modes: allowing heralded photons of high purity without narrowband filtering [3].
Photons have proven to be an effective test-bed for the fundamental concepts and elements of quantum-enhanced technologies. As systems become increasingly complex, however, practical considerations make the traditional approach of bulk optics and free-space propagation progressively more difficult. The major obstacles are the physical space necessary to realise and operate such a complex system, its stability, and maintaining low losses. In order to address these issues, quantum optical technologies can take a cue from their classical counterparts and look towards an integrated architecture to provide miniaturisation, greatly enhanced stability, less alignment, and low loss interfaces between different system components. In this thesis the feasibility of chip-based waveguides as a platform for metrology and information processing will be explored. In Part I, the necessary criteria for a metrology system to out-perform its classical counterpart will be investigated. It will be found that loss is a major barrier to this aim and, critically, that it is unlikely to have been achieved to date by any experiment which consumes resources of a fixed photon number. The issue of loss will be addressed by developing a scalable heralded source of a class of entangled photonic states which are both robust to losses and practically feasible to prepare. A novel tomographic technique will be developed to characterize these states and it will be explicitly demonstrated how it is possible to beat some bounds on classical performance without being able to out-perform a comparable classical system. Finally, a proof of principle demonstration of a waveguide-based interferometer with an integrated phase-shifter will be undertaken. It will be shown that the device preserves quantum interference, making it suitable for use in quantum-enhanced metrology applications. In Part II, integrated optics in the context of information processing will be discussed. First, a novel characterization technique will be developed which enables the behaviour of complex circuits to be predicted. The technique is independent of loss in the device being characterized. A method of simulating these circuits will be outlined that takes advantage of the computational speed-up available from parallelisation and sparse matrix operations. A key increase in complexity for integrated photonic systems will be demonstrated by showing quantum interference of three photons from two separate sources in eight spatial modes. The resulting interference has a visibility which beats all possible classical interference visibilities for similar circuits. Finally, a fully integrated waveguide-coupled photon-number-resolving detector will be developed and demonstrated. This proof of concept demonstration will show good resolution of different photon number events. The device will be modelled and routes to high efficiency operation will be explored.
Interference between independent single photons is perhaps the most fundamental interaction in quantum optics. It has become increasingly important as a tool for optical quantum information science, as one of the rudimentary quantum operations, together with photon detection, for generating entanglement between non-interacting particles. Despite this, demonstrations of large-scale photonic networks involving more than two independent sources of quantum light have been limited due to the difficulty in constructing large arrays of high-quality single photon sources. Here, we solve the key challenge, reporting a novel array of more than eighteen near-identical, low-loss, high-purity, heralded single photon sources achieved using spontaneous four-wave mixing (SFWM) on a silica chip. We verify source quality through a series of heralded Hong-Ou-Mandel experiments, and further report the experimental three-photon extension of the entire Hong-Ou-Mandel interference curves, which map out the interference landscape between three independent single photon sources for the first time.
In the past decades quantum optics has been at the forefront of quantum innovative technologies. For practical applications, scalable platforms for implementation of quantum optical circuits are vital. This thesis presents two new platforms for scalable implementation of quantum optical circuits, namely, modular approach and monolithic integration. Here, we take the first steps towards the integration of three main elements of every quantum optics circuits: Single-photon emitters, single-photon detectors, and quantum logics. Until now, most quantum optical circuits used separate platforms for single-photon generation and detection. The main challenge in the integration of these technologies, which have different requirements, has slowed down the research in the field. Here, we integrate sources and detectors by first fabricating the devices on their own platform and then transferring and combining them together. Plasma enhanced chemical vapor deposition of silicon nitride followed by etching optical waveguides connect these elements. Removing the Poissonian optical excitation field from the quantum circuit is necessary for integration. Classical optical excitation can be avoided if the sources are electrically pumped. However, fabrication of high-quality electrically pumped sources, suitable for integration, has been limited. The experiments described in chapter 4 are our first step towards addressing the mentioned problem. Defect-free nanowires are grown on <100> direction and their optoelectronic performance are characterized. Nanowire quantum dots, thanks to their waveguiding, purity, coherence and their potentials for deterministic integration with other optical circuits, are promising single-photon sources for on-chip quantum optics. However, precise control of the emission energy of the quantum dots by growth has not become possible yet. Chapter 5 describes a method for on-chip tuning of emission energy of nanowire quantum dots using strain fields. We show the emission energy of independent nanowire quantum dots can be brought into degeneracy without affecting their single-photon emission properties. The quantum optical components have to be routed and connected together to form functional circuits. On a chip, this is usually carried out using optical waveguides. Moreover, manipulation of single photons has to be done in a scalable fashion. Again optical waveguides and ring resonators are very good candidates for this task. Therefore, understanding the behavior of these circuits such as their losses, polarization dependence, and temperature behavior is important. The experiment described in chapter 6 studies the behavior of plasma enhanced silicon nitride waveguides in cryogenic temperatures. We concluded in this chapter that due to weak thermo-optic sensitivity of silicon nitride at cryogenic temperatures, the available thermal budget on the system should be carefully considered. An important step in achieving a scalable platform for quantum optical circuits is deterministic and efficient integration of single-photon sources. In chapter 7, we demonstrate successful integration of III-V nanowire quantum dots with silicon nitride waveguides. The nanowires are deterministically selected and transferred from the original growth chip to the new substrate where they are integrated with low-loss silicon nitride waveguides. Our measurements show that the integrated sources preserve their high quality emission properties. In chapter 8, we describe an alternative approach: amodular method for scalable quantum optics. The proposed technique is based on coupling the single-photon from sources into optical fibers where the photons can be processed and then fed into the single-photon detectors. This approach has high flexibility and is easier to implement but as described in the chapter, at the moment, losses in the interfaces between optical fibers and single-photon sources are a major limiting factor. We conclude the thesis with some possible future directions and exciting new results on integration of single-photon detectors with sources and waveguides. Finally, primary results on on-chip single-photon filtering and removal of the optical excitation field are demonstrated.