Fabrication Control of Superconducting Qubit Devices

K. W. Chan, Tianyi Li, Wei Liu +9 more

Edward Leonard, JJ Nelson, Matthew J. Beck +8 more

Matthew J. Beck, Edward Leonard, Ted Thorbeck +5 more

Bethany M. Niedzielski

Quantum computers perform calculations using quantum bits, or qubits, which can be made from superconducting circuits. These superconducting qubits allow direct control over device parameters while leveraging conventional Si-based fabrication techniques. MIT Lincoln Laboratory is designing and building high performance superconducting qubit devices with increased connectivity and addressability by utilizing advanced process techniques and 3D integration. Our three-tier stack architecture combines separately fabricated qubit, interposer, and routing chips with indium bump bonding. This stack contains high performance qubits, resonators, and couplers, superconducting air bridge crossovers, hard-stop spacing control, superconducting high aspect-ratio through-Si vias, and planarized superconducting routing layers. I will discuss our most recent accomplishments in the fabrication of three-tier stack devices and the effects of additional processing on the uniformity and integrity of their individual components.

Irfan A. Siddiqi

Jeroen Verjauw, R. Acharya, Jacques Van Damme +11 more

Abstract As the superconducting qubit platform matures towards ever-larger scales in the race towards a practical quantum computer, limitations due to qubit inhomogeneity through lack of process control become apparent. To benefit from the advanced process control in industry-scale CMOS fabrication facilities, different processing methods will be required. In particular, the double-angle evaporation and lift-off techniques used for current, state-of-the-art superconducting qubits are generally incompatible with modern-day manufacturable processes. Here, we demonstrate a fully CMOS compatible qubit fabrication method, and show results from overlap Josephson junction devices with long coherence and relaxation times, on par with the state-of-the-art. We experimentally verify that Argon milling—the critical step during junction fabrication—and a subtractive-etch process nevertheless result in qubits with average qubit energy relaxation times T 1 reaching 70 µs, with maximum values exceeding 100 µs. Furthermore, we show that our results are still limited by surface losses and not, crucially, by junction losses. The presented fabrication process, therefore, heralds an important milestone towards a manufacturable 300 mm CMOS process for high-coherence superconducting qubits and has the potential to advance the scaling of superconducting device architectures.