A detailed understanding of the noise processes and errors in near-term quantum computers is essential for accurate calibration of gates, and for achieving optimal performance when executing near-term applications such as quantum chemistry, optimization, or machine learning problems. This paper introduces several sources of noise in superconducting qubit based quantum computers such as those deployed by IBM, describes some of the main techniques for characterizing the resulting errors, and for mitigating the effects of certain errors without access to quantum error correction. We demonstrate experimental application of these techniques on an IBM Quantum system using the open source Qiskit software library.
A detailed understanding of the noise processes and errors in near-term quantum computers is essential for accurate calibration of gates, and for achieving optimal performance when executing near-term applications such as quantum chemistry, optimization, or machine learning problems. This paper introduces several sources of noise in superconducting qubit based quantum computers such as those deployed by IBM, describes some of the main techniques for characterizing the resulting errors, and for mitigating the effects of certain errors without access to quantum error correction. We demonstrate experimental application of these techniques on an IBM Quantum system using the open source Qiskit software library.
ABSTRACT: Recent research has tackled the problem of mitigating noise present in quantum computers in the Noisy Intermediate-Scale Quantum (NISQ) era to enable precise computations and to benefit from the intrinsic properties of quantum mechanics. For this matter, an important task is the characterization of qubits available in quantum devices so as to provide insights on how to reduce noise on the final output of a quantum circuit. Characterization comprises analysis of noise sources and this information can be used to reduce noise with methods such as Cycle Benchmarking, Quantum Error Mitigation, Quantum Error Correction and others. Here, we study optimization of pulses through Quantum Optimal Control (QOC) to obtain higher gate fidelity. We will explore an algorithm that performs calibration on specific quantum gates by implementing optimized pulse schedules to subsequently use the algorithm for analysis of noise sources. Using calibrated gates as input, several benchmarking protocols, including pulse noise extrapolation, leakage analysis from quantum optimal control, and machine learning based classification of qubit readout, will be tested to extract precise information on how noise influences the analyzed qubits. We will explain and discuss different techniques for obtaining properties of qubits and quantum computers. We will implement state discrimination with a Machine Learning (ML) focus to analyze readout errors caused by factors such as cross-talk and leakage into higher quantum states. We will perform noise fitting of optimized pulses and evaluate the effectiveness of important quantum algorithms at the pulse level.
Noise is the primary hindrance of quantum computers in unleashing its full potential, and attenuating its effect is necessary for useful quantum computation. While we look forward to error correction in upcoming years, several other techniques have been developed to fight with noise in near term. In this presentation, we shall first look into the different sources of noise in current quantum devices, and discuss some error suppression and mitigation techniques for lowering their effects. We shall take a deeper dive into understanding one of the mitigation methods, namely zero noise extrapolation, and discuss the pipeline required for attaining maximal performance out of these methods 1 . We shall touch upon the results obtained by IBM 2 as evidence of utility provided by these methods in nearterm devices. Finally, we shall briefly introduce other techniques, such as operator back propagation, circuit cutting etc., which can also be used in certain scenarios for further reducing the effect of noise on quantum systems. The goal of this presentation is to enable the listeners to use the proper methods to achieve noise mitigated useful results for their research.
Abstract Quantum computing has recently emerged as a novel paradigm for solving problems otherwise intractable on classical computers, yet the practical progress of quantum computers is severely impacted by noise, decoherence, and imperfect gate operations in Noisy Intermediate-Scale Quantum (NISQ) devices. Specific to IBM Quantum hardware, imperfections due to readout error, gate errors, and device drift, which depends on time, resolves limits for the accuracy of outputs from our algorithms. The mitigation strategies currently used, for example, Measurement Error Mitigation (MEM), Zero Noise Extrapolation (ZNE), and Clifford Data Regression (CDR), offer improvement over raw, unmitigated outputs, but they are static and not dynamic; the reduction of noise in within an NISQ device is temporal and can vary in patterns that are non-zero. In addition to this, using the conventional methods provides inconsistent and suboptimal results.This study will provide enhanced reliability with respect to performing quantum computation on IBM Quantum hardware with a unique mitigation framework that is adaptive and computationally efficient for a high-fidelity output. The problem taken on here is the failure of existing error mitigation strategies to provide adaptive noise compensation, as they assume a statically-distributed error, despite the performance-related characteristics already being documented in regards to calibration drift and variation over time.To achieve this, we propose a Hybrid Adaptive Error Mitigation (HAEM) approach that includes baseline measurement error mitigation and an additional correction layer that utilizes realtime calibration information, along with lightweight machine learning models. The approach can be broken down into three steps: (i) perform standard measurement error mitigation to reduce classical readout noise, (ii) execute compact calibration circuits, such as Bell states, GHZ states and Clifford benchmarks to capture then current error profile of the device, and (iii) use a lightweight machine learning model (having been trained on historical and newest calibration data) to dynamically change the mitigation weights applied for the target quantum algorithm. All implementation is done using Qiskit Runtime to ensure low-latency execution, and we completed experiments on both Qiskit Aer noisy simulators and IBM Quantum devices.Initial results suggest HAEM improved the outputs of quantum algorithms' fidelity compared to the unmitigated runs and the baseline measurement error mitigation (MEM) runs. On the noisy simulators, HAEM increased fidelity from a raw performance of 0.65 to 0.87, nearly a 34% improvement. In fairer hardware-like scenarios, fidelity-on-average was persistently 12% better than MEM, with nearly equal time duration for the additional adaptive measurements. The adaptive aspect of HAEM consistently supported subsequent calibration cycles of the device and was effective to continue providing fidelity improvements despite the static mitigation performance degrading.To sum up, the proposed HAEM framework is a modern and viable alternative for error mitigation which brings together the benefits of baseline approaches with corrections that are driven by fixed-function error-corrective, adaptive learning. As both learning-based and standard baseline approaches can only achieve fixed levels of performance, HAEM, through its use of noise mitigation both at execution time and through correlating it with standard data, provides a route towards reliable quantum computations on current IBM hardware. HAEM also presents a contribution to the NISQ error-resilient landscape, and however it is intended that it will continue to improve future applications of hybrid workflows of quantum and classical computation where error mitigation and resilience is important.
Quantum computing testbeds exhibit high-fidelity quantum control over small collections of qubits, enabling performance of precise, repeatable operations followed by measurements. Currently, these noisy intermediate-scale devices can support a sufficient number of sequential operations prior to decoherence such that near term algorithms can be performed with proximate accuracy (like chemical accuracy for quantum chemistry problems). While the results of these algorithms are imperfect, these imperfections can help bootstrap quantum computer testbed development. Demonstrations of these algorithms over the past few years, coupled with the idea that imperfect algorithm performance can be caused by several dominant noise sources in the quantum processor, which can be measured and calibrated during algorithm execution or in post-processing, has led to the use of noise mitigation to improve typical computational results. Conversely, benchmark algorithms coupled with noise mitigation can help diagnose the nature of the noise, whether systematic or purely random. Here, we outline the use of coherent noise mitigation techniques as a characterization tool in trapped-ion testbeds. We perform model-fitting of the noisy data to determine the noise source based on realistic physics focused noise models and demonstrate that systematic noise amplification coupled with error mitigation schemes provides useful data for noise model deduction. Further, in order to connect lower level noise model details with application specific performance of near term algorithms, we experimentally construct the loss landscape of a variational algorithm under various injected noise sources coupled with error mitigation techniques. This type of connection enables application-aware hardware codesign, in which the most important noise sources in specific applications, like quantum chemistry, become foci of improvement in subsequent hardware generations.
Quantum computing promises to address problems in simulation, optimization, and chemistry, but current hardware operates in the noisy intermediate-scale (NISQ) regime where coherence limits, gate imperfections, and readout errors restrict performance. Improving calibration and mitigating errors therefore remain essential. This thesis analyzes error reduction on superconducting transmon qubits through calibration, gate analysis, and circuit-level mitigation. It compares single-qubit amplitude calibration methods and analyzes two-qubit gates based on the cross-resonance interaction, identifying differences in precision, convergence, and performance. In addition, it develops Inverted-Circuit Zero-Noise-Extrapolation (IC-ZNE) which measures effective error strength using inverted circuits. Compared to standard ZNE, IC-ZNE achieves results closer to ideal values and reduces observable errors. Overall, the presented methods improve the reliability of near-term quantum processors.
Characterization of noise in current near-term quantum devices is of paramount importance to fully use their computational power. However, direct quantum process tomography becomes unfeasible for systems composed of tens of qubits. A promising alternative method based on tensor networks was recently proposed []. In this paper, we adapt it for the characterization of noise channels on near-term quantum computers and investigate its performance thoroughly. In particular, we show how experimentally feasible tomographic samples are sufficient to accurately characterize realistic correlated noise models affecting individual layers of quantum circuits, and study its performance on systems composed of up to 20 qubits. Furthermore, we combine this noise characterization method with a recently proposed noise-aware tensor network error mitigation protocol for correcting outcomes in noisy circuits, resulting accurate estimations even on deep circuit instances. This positions the tensor-network-based noise characterization protocol as a valuable tool for practical error characterization and mitigation in the near-term quantum computing era. Published by the American Physical Society 2024