Characterization of noise in current near-term quantum devices is of paramount importance to fully use their computational power. However, direct quantum process tomography becomes unfeasible for systems composed of tens of qubits. A promising alternative method based on tensor networks was recently proposed []. In this paper, we adapt it for the characterization of noise channels on near-term quantum computers and investigate its performance thoroughly. In particular, we show how experimentally feasible tomographic samples are sufficient to accurately characterize realistic correlated noise models affecting individual layers of quantum circuits, and study its performance on systems composed of up to 20 qubits. Furthermore, we combine this noise characterization method with a recently proposed noise-aware tensor network error mitigation protocol for correcting outcomes in noisy circuits, resulting accurate estimations even on deep circuit instances. This positions the tensor-network-based noise characterization protocol as a valuable tool for practical error characterization and mitigation in the near-term quantum computing era. Published by the American Physical Society 2024
Characterization of noise in current near-term quantum devices is of paramount importance to fully use their computational power. However, direct quantum process tomography becomes unfeasible for systems composed of tens of qubits. A promising alternative method based on tensor networks was recently proposed []. In this paper, we adapt it for the characterization of noise channels on near-term quantum computers and investigate its performance thoroughly. In particular, we show how experimentally feasible tomographic samples are sufficient to accurately characterize realistic correlated noise models affecting individual layers of quantum circuits, and study its performance on systems composed of up to 20 qubits. Furthermore, we combine this noise characterization method with a recently proposed noise-aware tensor network error mitigation protocol for correcting outcomes in noisy circuits, resulting accurate estimations even on deep circuit instances. This positions the tensor-network-based noise characterization protocol as a valuable tool for practical error characterization and mitigation in the near-term quantum computing era. Published by the American Physical Society 2024
Readout errors are a major bottleneck to extracting reliable information from near-term quantum processors, especially when spatial correlations are non-negligible. We present a unified tensor-network framework that models the readout process as a matrix product operator (MPO), enabling efficient characterization and mitigation beyond uncorrelated approximations. The MPO model is trained via likelihood optimization on calibration data and applies to multiple tasks, including nonlocal observable estimation, random circuit sampling, and random-measurement protocols, such as classical shadows and learning-based tomography. Experiments on a superconducting processor and numerical simulations up to 20 qubits show that the MPO model captures correlated readout errors that uncorrelated models miss, with a sample cost that grows only near-linearly with system size. When extended to two-dimensional systems, the framework can also be integrated with tensor-network quantum error-correction decoders by performing joint inference over data and readout errors. These results establish tensor-network readout error mitigation as a scalable and versatile approach for noise-aware quantum data processing.
Until fault-tolerance becomes implementable at scale, quantum computing will heavily rely on noise mitigation techniques. While methods such as zero noise extrapolation with probabilistic error amplification (ZNE-PEA) and probabilistic error cancellation (PEC) have been successfully tested on hardware recently, their scalability to larger circuits may be limited. Here, we introduce the tensor-network error mitigation (TEM) algorithm, which acts in post-processing to correct the noise-induced errors in estimations of physical observables. The method consists of the construction of a tensor network representing the inverse of the global noise channel affecting the state of the quantum processor, and the consequent application of the map to informationally complete measurement outcomes obtained from the noisy state. TEM does therefore not require additional quantum operations other than the implementation of informationally complete POVMs, which can be achieved through randomised local measurements. The key advantage of TEM is that the measurement overhead is quadratically smaller than in PEC. We test TEM extensively in numerical simulations in different regimes. We find that TEM can be applied to circuits of twice the depth compared to what is achievable with PEC under realistic conditions with sparse Pauli-Lindblad noise, such as those in [E. van den Berg et al., Nat. Phys. (2023)]. By using Clifford circuits, we explore the capabilities of the method in wider and deeper circuits with lower noise levels. We find that in the case of 100 qubits and depth 100, both PEC and ZNE fail to produce accurate results by using ∼105 shots, while TEM succeeds.
Noise characterisation not only enables error mitigation but also provides valuable information about the intrinsic performance of a quantum device, identifying dominant error contributions and bounding noise stability well beyond the aggregated calibration data. Deploying such methods on a specific hardware topology must combine efficiency and accuracy, assess noise stability, and validate the reconstructed noise model. Here we develop and implement these methods on a superconducting processor with square-lattice topology. First, we revise the cycle-benchmarking protocol and reduce the bias arising from unlearnable degrees of freedom via a regularised cost function. Second, we extend a previously developed tensor-network tomography method to match the device layout and show how its accuracy can be improved by repeated layer execution. Both methods allow approximate sublayer noise models to be extracted from parent ones. Using noise characterisation as a tool, we map the noise structure, track drift, and validate the adequacy of the learnt noise models against experimentally observed noisy estimations in benchmark physical and chemistry circuits. These results inform further improvements in the underlying technology and provide estimates of the size of noise-mitigated circuits that the device can support.
The impressive pace of advance of quantum technology calls for robust and scalable techniques for the characterization and validation of quantum hardware. Quantum process tomography, the reconstruction of an unknown quantum channel from measurement data, remains the quintessential primitive to completely characterize quantum devices. However, due to the exponential scaling of the required data and classical post-processing, its range of applicability is typically restricted to one- and two-qubit gates. Here, we present a technique for performing quantum process tomography that addresses these issues by combining a tensor network representation of the channel with a data-driven optimization inspired by unsupervised machine learning. We demonstrate our technique through synthetically generated data for ideal one- and two-dimensional random quantum circuits of up to 10 qubits, and a noisy 5-qubit circuit, reaching process fidelities above 0.99 using several orders of magnitude fewer (single-qubit) measurement shots than traditional tomographic techniques. Our results go far beyond state-of-the-art, providing a practical and timely tool for benchmarking quantum circuits in current and near-term quantum computers.
The realization of fault-tolerant quantum computers remains a challenging endeavor, forcing state-of-the-art quantum hardware to rely heavily on noise mitigation techniques. Standard quantum error mitigation is typically based on post-processing strategies. In contrast, the present work explores a pre-processing approach, in which the effects of noise are mitigated before performing a measurement on the output state. The main idea is to find an observable Y such that its expectation value on a noisy quantum state E(ρ) matches the expectation value of a target observable X on the noiseless quantum state ρ. Our method requires the execution of a noisy quantum circuit, followed by the measurement of the surrogate observable Y. The main enablers of our method in practical scenarios are Tensor Networks. The proposed method improves over Tensor Error Mitigation (TEM) in terms of average error, circuit depth, and complexity, attaining a measurement overhead that approaches the theoretical lower bound. The improvement in terms of classical computation complexity is in the order of ∼106 times when compared to the post-processing computational cost of TEM in practical scenarios. Such gain comes from eliminating the need to perform the set of informationally complete positive operator-valued measurements (IC-POVM) required by TEM, as well as any other tomographic strategy.
As quantum devices make steady progress towards intermediate scale and fault-tolerant quantum computing, it is essential to develop rigorous and efficient measurement protocols that account for known sources of noise. Most existing quantum characterization protocols such as gate-set tomography and randomized benchmarking assume the noise acting on the qubits is Markovian. However, this assumption is often not valid, as for the case of 1/f charge noise or hyperfine nuclear spin noise. Here, we present a general framework for quantum process tomography (QPT) in the presence of time-correlated noise. We further introduce fidelity benchmarks that quantify the relative strength of different sources of Markovian and non-Markovian noise. As an application of our method, we perform a comparative theoretical and experimental analysis of silicon spin qubits. We first develop a detailed noise model that accounts for the dominant sources of noise and validate the model against experimental data. Applying our framework for time-correlated QPT, we find that the number of independent parameters needed to characterize one- and two-qubit gates can be compressed by 10× and 100× , respectively, when compared to the fully generic case. These compressions reduce the amount of tomographic measurements needed in experiment, while also significantly speeding up numerical simulations of noisy quantum circuit dynamics compared to time-dependent Hamiltonian simulation. Using this compressed noise model, we find good agreement between our theoretically predicted process fidelities and two-qubit interleaved randomized benchmarking fidelities of 99.8% measured in recent experiments on silicon spin qubits. More broadly, our formalism can be directly extended to develop efficient and scalable tuning protocols for high-fidelity control of large arrays of quantum devices with non-Markovian noise. Published by the American Physical Society 2024