Solid-state superconducting circuit-quantum electrodynamics (QED) system is a promising candidate for quantum information processing and an ideal platform for quantum measurement and quantum control studies. As an extension to our previous simulation for single qubit circuit-QED, in this work we simulate the quantum measurement and control of multi-qubit system. Particularly, we consider the deterministic generation of a two-qubit Bell state. In this context we examine the validity conditions of two cavity-photon-elimination scheme. On the level of quantum trajectory simulation, we find that, owing to the qubit flip caused by feedback, the advanced polaron-transformation scheme is no longer applicable if the measurement is not weak, which also makes meaningless the elegant effective measurement operator.
Solid-state superconducting circuit-quantum electrodynamics (QED) system is a promising candidate for quantum information processing and an ideal platform for quantum measurement and quantum control studies. As an extension to our previous simulation for single qubit circuit-QED, in this work we simulate the quantum measurement and control of multi-qubit system. Particularly, we consider the deterministic generation of a two-qubit Bell state. In this context we examine the validity conditions of two cavity-photon-elimination scheme. On the level of quantum trajectory simulation, we find that, owing to the qubit flip caused by feedback, the advanced polaron-transformation scheme is no longer applicable if the measurement is not weak, which also makes meaningless the elegant effective measurement operator.
The solid-state superconducting circuit-QED (quantum electrodynamics) system is a promising candidate for quantum computing and quantum information processing, which serves also as an ideal platform for quantum measurement and quantum control studies. In this context, a large number of cavity photons may be involved in the quantum dynamics and will degrade the simulation efficiency. To avoid this difficulty, it is helpful to eliminate the degrees of freedom of the cavity photons, and obtain an effective master-equation description which contains only the qubit states. In this work, we examine two such schemes, the adiabatic elimination (AE) and the more recently proposed polaron transformation (PT) approaches, by comparing their results with exact numerical simulations. We find that in the absence of qubit-flip, which is a specific quantum nondemolition (QND) measurement, the PT scheme is superior to the AE method. Actually, in this case the PT scheme catches the measurement dynamics exactly. However, in the presence of qubit-flip such as for qubit oscillation measurement, the PT scheme is no longer better than the AE approach. We conclude that both schemes, in the weak measurement regime, can work almost equally well. This corresponds to strong cavity damping or weak coupling between the qubit and cavity photons. Out of this regime, unfortunately, one has to include the cavity photons into numerical simulations and more advanced methods/techniques are waiting for their exploration in this field.
Circuit cavity quantum electrodynamics (QED) is proving to be a powerful platform to implement quantum feedback control schemes due to the ability to control superconducting qubits and microwaves in a circuit. Here, we present a simple and promising quantum feedback control scheme for deterministic generation and stabilization of a three-qubit W state in the superconducting circuit QED system. The control scheme is based on continuous joint Zeno measurements of multiple qubits in a dispersive regime, which enables us not only to infer the state of the qubits for further information processing but also to create and stabilize the target W state through adaptive quantum feedback control. We simulate the dynamics of the proposed quantum feedback control scheme using the quantum trajectory approach with an effective stochastic maser equation obtained by a polaron-type transformation method and demonstrate that in the presence of moderate environmental decoherence, the average state fidelity higher than 0.9 can be achieved and maintained for a considerably long time (much longer than the single-qubit decoherence time). This control scheme is also shown to be robust against measurement inefficiency and individual qubit decay rate differences. Finally, the comparison of the polaron-type transformation method to the commonly used adiabatic elimination method to eliminate the cavity mode is presented.
In this thesis, experimentally relevant aspects and open questions of quantum information processing and measurement in circuit quantum electrodynamics have been investigated theoretically. Circuit quantum electrodynamics is a relatively young field combining superconducting transmission line resonators on-chip with superconducting quantum bits which serve as artificial atoms. Remarkable experiments have underlined the prospects of circuit QED as a possible architecture for quantum information processing as well as a framework within which quantum optics experiments can be performed. In contrast to their optical counterparts, these experiments reach the ultra-strong coupling limit and allow e.g. the generation of Fock states, the study of decoherence and the observation of quantum jumps. We present the physics of superconducting circuits based on the Josephson junction as a non-linear circuit element. We discuss the various types of quantum bits (qubits) before turning to an introduction on cavity QED and conclude the introduction with a brief presentation of the most relevant experiments and a short introduction to the principles and prospects of quantum information processing. Building on the pioneering theoretical and experimental work in which up to three qubits have been integrated on a chip and successfully coupled via a cavity mode, we propose a scheme to overcome the natural limits concerning scalability in these systems. Usually, scalability is severely limited by the resonance width of the qubit transitions and the attainable frequency range for both qubit transition and cavity resonance frequencies. This limits the present setups to at most ten qubits. As a possible solution, we propose and investigate a cross-bar grid layout of cavities with qubits at the intersections. It turns out that this setup, allowing for up to about 1000 qubits, offers significant advantages over e.g. nearest-neighbor coupling schemes. In addition, it can serve as a building block for a truly scalable scheme for fault-tolerant quantum information processing with superconducting circuits by combining 7x7 arrays in a staircase manner. Furthermore, we discuss and simulate different possibilities to improve upon the suggested scheme by e.g. using resonant gates and optimal control theory. Another focus of the present thesis is measurement physics. In order to investigate e.g. the possibilities of using a circuit QED system to dispersively detect single microwave photons or to generate multi-qubit entangled states, we introduce in a pedagogical manner the basics of stochastic master equations which generate quantum trajectories before turning to concrete applications. Quantum trajectories have proven to be a state-of-the-art tool to analyze measurement situations in a very realistic manner by giving access to both the measurement record as well as the internal quantum dynamics conditioned on this record. Using the method of quantum trajectories as generated by stochastic master equations, we discuss a scheme to efficiently generate multi-qubit entangled states in a very flexible way. The method is based on a collective, dispersive qubit readout. By this measurement, a suitable product state of N qubits can be reliably converted into e.g. an N-qubit Greenberger-Horne-Zeilinger or W state. We propose and discuss the scheme and investigate the effects of decoherence and parameter spread as they would be encountered in experiment. Last but not least, we propose and fully analyze a scheme to dispersively detect single itinerant microwave photons. While experiments to generate single microwave photons have already been successfully performed, their single-shot quantum non-demolition detection has not been possible so far. The scheme presented in this thesis closes this gap in the circuit QED toolbox and reaches detection efficiencies of 30% only limited by fundamental quantum mechanics in this case the Quantum Zeno effect. This detection scheme could be used in quantum communication or quantum cryptography applications.
Controlling Photons in Superconducting Electrical Circuits Blake Robert Johnson 2011 Circuit quantum electrodynamics (circuit QED) is a system that allows for strong coupling between microwave photons in transmission line cavities and superconducting qubits or artificial atoms. While circuit QED is often studied in the context of quantum information processing, it also provides an attractive platform for performing quantum optics experiments on-a-chip, because the level of control and coupling strengths available in circuit QED opens a vast array of possibilities for the creation, manipulation, and detection of quantum states of light. In this thesis, the extension of circuit QED to two cavities is examined, including design issues for cavities with very different Q-factors, and a new qubit design is proposed that couples to both cavities. The qubit-cavity interaction, while providing much of the utility of circuit QED, also introduces additional qubit relaxation. A powerful formalism for calculating this energy decay due to the classical admittance of the electromagnetic environment is presented in the context of circuit QED. Measurements of a wide range of samples validate this theory as providing an effective model for relaxation. A new circuit element, called the ‘Purcell filter’, is introduced and demonstrated to decouple the relationship between cavity Q and qubit relaxation. Finally, a new method for performing quantum nondemolition measurements of microwave photons is demonstrated. Controlling Photons in Superconducting Electrical Circuits A Dissertation Presented to the Faculty of the Graduate School of Yale University in Candidacy for the Degree of Doctor of Philosophy by Blake Robert Johnson Dissertation Director: Professor Robert J. Schoelkopf
Circuit quantum electrodynamics (cQED), exemplified by a coupled system of a superconducting qubit and a microwave cavity, is a powerful framework for the quantum control and measurement of macroscopic quantum states in solid-state circuits. Quantum circuits based on superconducting qubits have emerged as one of the leading platforms in the pursuit of fault-tolerant quantum computing. Despite significant progress in extending qubit lifetimes, refining experimental protocols, and scaling up quantum processors, errors arising from the control and measurement of superconducting qubits continue to hinder the realization of a universal quantum computer. To investigate the error mechanisms for state-of-the-art qubits, we realize long-lived superconducting transmon qubits that exhibit fluctuating lifetimes, with an average of 0.2 ms and a maximum exceeding 0.4 ms. We then investigate their dominant error mechanism. By introducing novel time-resolved error measurements that are synchronized with the operation of the pulse tube cooler in a dilution refrigerator, we find that mechanical vibrations from the pulse tube induce nonequilibrium dynamics in highly coherent qubits, leading to their correlated bit-flip errors. Our findings not only deepen our understanding of qubit error mechanisms but also provide valuable insights into potential error-mitigation strategies for achieving fault tolerance by decoupling superconducting qubits from their mechanical environments. We also present a novel scheme for operating a cQED system in a regime where the cavity is largely displaced. We find that a qubit drive at the bare cavity frequency can effectively displace the cavity field while minimizing the cavity-drive-induced dephasing and the ac Stark shift. Furthermore, we demonstrate that standard cQED protocols, such as qubit control, readout, and cavity single-photon generation, remain compatible with largely displaced cavity fields, even beyond the critical photon number. These findings open new pathways for exploring cQED dynamics in large-photon-number regimes, including the study of nonlinear phenomena in microwave cavities, the saturation of two-level system baths for extending the coherence of microwave quantum states, and the acceleration of the dispersive readout. Finally, mechanical resonators have emerged as integral components in quantum computing for storing and transducing quantum information. Low-frequency mechanical resonators, with extremely low energy dissipation rates, are particularly interesting for extending the lifetimes of stored quantum information. However, integrating low-frequency mechanical resonators with qubits is challenging because their small energy gaps make coherent energy exchange and ground-state preparation difficult. In this thesis, we report the first steps towards the characterization of a hybrid quantum device, consisting of a Transmon qubit and a circuit optomechanical system, both coupled to a 3D microwave cavity.
Developments over the last two decades have opened the path towards quantum technologies in many quantum systems, such as cold atoms, trapped ions, cavity-quantum electrodynamics (QED), and circuit-QED. However, the fragility of quantum states to the effects of measurement and decoherence still poses one of the greatest challenges in quantum technology. An imperative capability in this path is quantum feedback, as it enhances the control possibilities and allows for prolonging coherence times through quantum error correction. While changing parameters from shot to shot of an experiment or procedure can be considered feedback, quantum mechanics also allows for the intriguing possibility of performing feedback operations during the measurement process itself. This broader approach to measurements leads to the concepts of weak measurement, quantum trajectories, and numerous types of feedback with no classical analogs. These types of processes are the primary focus of this review. We introduce the concept of quantum feedback in the context of circuit-QED, an experimental platform with significant potential in quantum feedback and technology. We then discuss several experiments and see how they elucidate the concepts of continuous measurements and feedback. We conclude with an overview of coherent feedback, with application to fault-tolerant error correction.