Superconducting nanowire single-photon detectors (SNSPDs) have enabled the realization of several quantum optics technologies thanks to their high system detection efficiency (SDE), low dark counts, and fast recovery time. However, the widespread use of linear optical quantum computing, quasi-deterministic single-photon sources, and quantum repeaters requires even faster detectors that can also distinguish between different photon-number states. Here, we present an SNSPD array composed of 14 independent pixels, achieving an SDE of 90% in the telecommunications band. By reading each pixel of the array independently, we show detection of telecommunication photons at 1.5 GHz with 45% absolute SDE. We exploit the dynamic photon-number resolution of the array to demonstrate accurate state reconstruction for a wide range of light inputs, including operation with long-duration light pulses, as obtained with some cavity-based sources. We show two-photon and three-photon fidelities of 74% and 57%, respectively, which represent state-of-the-art results for fiber-coupled SNSPDs.Superconducting nanowire single-photon detectors (SNSPDs) have enabled the realization of several quantum optics technologies thanks to their high system detection efficiency (SDE), low dark counts, and fast recovery time. However, the widespread use of linear optical quantum computing, quasi-deterministic single-photon sources, and quantum repeaters requires even faster detectors that can also distinguish between different photon-number states. Here, we present an SNSPD array composed of 14 independent pixels, achieving an SDE of 90% in the telecommunications band. By reading each pixel of the array independently, we show detection of telecommunication photons at 1.5 GHz with 45% absolute SDE. We exploit the dynamic photon-number resolution of the array to demonstrate accurate state reconstruction for a wide range of light inputs, including operation with long-duration light pulses, as obtained with some cavity-based sources. We show two-photon and three-photon fidelities of 74% and 57%, respectively, which represent state-of-the-art results for fiber-coupled SNSPDs.

arXiv:2303.17401Nano LettersJun 23, 202355 citations

Single-photon detection at the nanoscale with superconducting nanowires

Bitauld, Marsili, Fiore +3 more

Conference on Lasers and Electro-OpticsJan 1, 20080 citations

Temporal array with superconducting nanowire single-photon detectors for photon-number resolution

Mattias Jönsson, Marcin Świłło, Samuel Gyger +2 more

We present an experimental realization of a 16 element, temporal-array, photon-number-resolving (PNR) detector, which is a multiplexed single-photon detector that splits an input signal over multiple time bins, and the time bins are detected using two superconducting nanowire single-photon detectors (SNSPD). A theoretical investigation of the PNR capabilities of the detector is performed and it is concluded that, compared to a single-photon detector, our array detector can resolve one order of magnitude higher mean photon numbers, given the same number of input pulses to measure. This claim is experimentally verified and we show that the detector can accurately predict photon numbers between ${10}^{\ensuremath{-}3}$ and ${10}^{2}$ . Our present detector is incapable of single-shot photon-number measurements with high precision since its effective quantum efficiency is $49%$ . Using SNSPDs with a higher quantum efficiency the PNR performance will improve, but the photon-number resolution will still be limited by the array size.We present an experimental realization of a 16 element, temporal-array, photon-number-resolving (PNR) detector, which is a multiplexed single-photon detector that splits an input signal over multiple time bins, and the time bins are detected using two superconducting nanowire single-photon detectors (SNSPD). A theoretical investigation of the PNR capabilities of the detector is performed and it is concluded that, compared to a single-photon detector, our array detector can resolve one order of magnitude higher mean photon numbers, given the same number of input pulses to measure. This claim is experimentally verified and we show that the detector can accurately predict photon numbers between ${10}^{\ensuremath{-}3}$ and ${10}^{2}$. Our present detector is incapable of single-shot photon-number measurements with high precision since its effective quantum efficiency is $49%$. Using SNSPDs with a higher quantum efficiency the PNR performance will improve, but the photon-number resolution will still be limited by the array size.

arXiv:2009.08334Physical Review ANov 23, 202011 citations

Photon-number-resolving superconducting nanowire detectors

F. Mattioli, Zili Zhou, Alessandro Gaggero +6 more

Abstract In recent years, photon-number-resolving (PNR) detectors have attracted great interest, mainly because they can play a key role in diverse application fields. A PNR detector with a large dynamic range would represent an ideal photon detector, bringing the linear response of conventional analogue detectors down to the single-photon level. Several technologies, such as InGaAs single photon avalanche detectors (SPADs), arrays of silicon photomultipliers, InGaAs SPADs with self-differencing circuits and transition edge sensors have shown photon number resolving capability. Superconducting nanowires provide free-running single-photon sensitivity from visible to mid-infrared frequencies, low dark counts, excellent timing resolution (<60 ps) and short dead time (∼10 ns), at an easily accessible temperature (2–3 K), but they do not inherently resolve the photon number. In this framework, PNR detectors based on arrays of superconducting nanowires have been proposed. In this article we describe a number of methods and device configurations that have been pursued to obtain PNR capability using superconducting nanowire detectors.Abstract In recent years, photon-number-resolving (PNR) detectors have attracted great interest, mainly because they can play a key role in diverse application fields. A PNR detector with a large dynamic range would represent an ideal photon detector, bringing the linear response of conventional analogue detectors down to the single-photon level. Several technologies, such as InGaAs single photon avalanche detectors (SPADs), arrays of silicon photomultipliers, InGaAs SPADs with self-differencing circuits and transition edge sensors have shown photon number resolving capability. Superconducting nanowires provide free-running single-photon sensitivity from visible to mid-infrared frequencies, low dark counts, excellent timing resolution (<60 ps) and short dead time (∼10 ns), at an easily accessible temperature (2–3 K), but they do not inherently resolve the photon number. In this framework, PNR detectors based on arrays of superconducting nanowires have been proposed. In this article we describe a number of methods and device configurations that have been pursued to obtain PNR capability using superconducting nanowire detectors.

Superconductor Science and TechnologyAug 24, 201561 citations

Superconducting nanowire single-photon detectors

Berggren, Anant, Baek +11 more

Jan 1, 20110 citations

{10}^{2}

. Our present detector is incapable of single-shot photon-number measurements with high precision since its effective quantum efficiency is

49%

. Using SNSPDs with a higher quantum efficiency the PNR performance will improve, but the photon-number resolution will still be limited by the array size.