Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

arXiv:2009.08334 · Physical Review A

Temporal array with superconducting nanowire single-photon detectors for photon-number resolution

Mattias Jönsson, Marcin Świłło, Samuel Gyger, Val Zwiller, Gunnar G. Bjork

Published Nov 23, 2020• 11 citations
arXivHTMLPDF

Abstract

We present an experimental realization of a 16 element, temporal-array, photon-number-resolving (PNR) detector, which is a multiplexed single-photon detector that splits an input signal over multiple time bins, and the time bins are detected using two superconducting nanowire single-photon detectors (SNSPD). A theoretical investigation of the PNR capabilities of the detector is performed and it is concluded that, compared to a single-photon detector, our array detector can resolve one order of magnitude higher mean photon numbers, given the same number of input pulses to measure. This claim is experimentally verified and we show that the detector can accurately predict photon numbers between ${10}^{\ensuremath{-}3}$ and ${10}^{2}$. Our present detector is incapable of single-shot photon-number measurements with high precision since its effective quantum efficiency is $49%$. Using SNSPDs with a higher quantum efficiency the PNR performance will improve, but the photon-number resolution will still be limited by the array size.

DOI
10.1103/physreva.102.052616

Related papers

Resolving Photon Numbers Using Ultra-High-Resolution Timing of a Single Low-Jitter Superconducting Nanowire Detector

Sauer, Gregor, Mirco Kolarczik, Rodrigo Gómez +2 more

Photon-number-resolving (PNR) detectors are a key enabling technology in photonic quantum information processing. Here, we demonstrate the PNR capacity of conventional superconducting nanowire single-photon detectors by performing ultra-high-resolution time-tagging of the detector-generated electrical pulses. This method provides a viable approach for PNR with high detection efficiency and a high operational repetition rate. We present the implementation of such a PNR detector in the telecom C-band and its characterization by measuring the photon-number statistics of coherent light with tunable intensity. Additionally, we demonstrate the capabilities of the detection method by measuring photon-number correlations of non-classical states.

arXiv:2310.12472•Oct 19, 2023•5 citations

High-fidelity 0, 1 and 2 photon-number resolution in superconducting nanowire single-photon detectors for pulsed light

Fabio Auriemma, S M Junaid Bukhari, Daniela Salvoni +2 more

Abstract We experimentally demonstrate high-fidelity detection of 0, 1- and 2-photon states in a commercial superconducting nanowire single photon detector (SNSPD) under 20 MHz pulsed coherent illumination. The arrival of a different number of photons induces distinct temporal dynamics in the disruption of the superconducting state of the detector. Therefore, specific features emerge in the arrival-time histograms, that we show are directly correlated with the photon-number state. We show that, across a broad range of time-averaged light intensities, the probabilities of detecting 1- and 2 + -photon events collapse onto the Poisson distribution of coherent light. We identify the voltage detection threshold as a critical factor for photon number resolving (PNR) capabilities. Even under demanding conditions of high repetition rate illumination, we found that a high trigger level significantly enhances total detection fidelity, achieving 0.920 and 0.845 for 1-photon and for 2-photon events. These results correspond to remarkably low conditional misidentification probabilities, 0.000 02 and 0.0013, describing the classification error among detected 1- and 2-photon events. We identify an inherent 39 ps latency difference between single- and multi-photon detection events. We show that the measured 2-photon conditional misidentification probability corresponds to the one of a multiplexed PNR detector with 730 pixels. We believe that our findings provide a framework for developing high/fidelity spatially multiplexed SNSPD by exploiting the intrinsic PNR capabilities of individual constituting elements.

Superconductor Science and Technology•Sep 29, 2026•0 citations

Improved pulse discrimination for a superconducting series nanowire detector by applying a digital matched filter

Hao Hao, Qingyuan Zhao, Ling-Dong Kong +15 more

Photon number resolving (PNR) is an important capacity for detectors working in quantum and classical applications. Although a conventional superconducting nanowire single-photon detector (SNSPD) is not a PNR detector, by arranging nanowires in a series array and multiplexing photons over space, such series PNR-SNSPD can gain quasi-PNR capacity. However, the accuracy and maximum resolved photon number are both limited by the signal-to-noise ratio (SNR) of the output pulses. Here, we introduce a matched filter, which is an optimal filter in terms of SNR. Experimentally, the normalized spacing between pulse amplitudes from adjacent photon number detections increased by a maximum factor of 2.1 after the matched filter. Combining with a cryogenic amplifier to increase SNR further, such spacing increased by a maximum factor of 5.3. In contrast to a low pass filter, the matched filter gave better SNRs while maintaining low timing jitters. The minimum timing jitter of 55 ps was obtained experimentally. Our results suggest that the matched filter is a useful tool for improving the performance of the series PNR-SNSPD. The maximum resolved photon number can be expected to reach 65 or even larger.

arXiv:2109.00660•Applied Physics Letters•Dec 6, 2021•10 citations

Experimental Demonstration of Superconducting Series Nanowire Photon-Number-Resolving Detector at 660 nm Wavelength

Ruiying Xu, Tao Xu, Qi Chen +11 more

Photon-number-resolving (PNR) is an important functionality in many applications. The traditional single photon detectors (SNSPDs) operated with the conventional readout scheme does not have the PNR functionality. In this paper, we demonstrate a superconducting photon-number-resolving detector operating at the visible wavelength regime, based on the serial connection of six superconducting nanowires. The results of our 6-element PNR device show clear evidence of n-photons differentiation with n ranging from 1 to 6. The system detection efficiency reaches 54% with the dark counts rate below 10 Hz at 660 nm. The demonstrated 6-element PNR device does not require a complex readout circuit compared with the SNSPD array device, and is expected to have wider applications in addition to imaging and communication.

IEEE photonics journal•Jan 24, 2019•1 citation

Improving photon number resolvability of a superconducting nanowire single-photon detector array using a level comparator circuit

Jia Huang, Xingyu Zhang, Weijun Zhang +7 more

Abstract Photon number resolving (PNR) capability is very important in many optical applications, including quantum information processing, fluorescence detection, and few-photon-level ranging and imaging. Superconducting nanowire single-photon detectors (SNSPDs) with a multipixel interleaved architecture give the array an excellent spatial PNR capability. However, the signal-to-noise ratio (SNR) of the PNR (SNRPNR) of the array will be degraded with increasing the element number due to the electronic noise in the readout circuit, which limits the PNR resolution as well as the maximum PNR number. In this study, a 16-element interleaved SNSPD array was fabricated, and the PNR capability of the array was investigated and analyzed. By introducing a level comparator circuit (LCC), the SNRPNR of the detector array was improved over a factor of four. In addition, we performed a statistical analysis of the photon number on this SNSPD array with LCC, showing that the LCC method effectively enhances the PNR resolution. Besides, the system timing jitter of the detector was reduced from 90 ps to 72 ps due to the improved electrical SNR.

Superconductor Science and Technology•Apr 9, 2024•7 citations

Temporal and photon number resolution of superconducting nanowire single-photon detectors

Jun Xie, Hengbin Zhang

Single-photon detectors based on superconducting nanowires (SNSPDs) are promising technologies with good comprehensive performance, especially their excellent temporal resolution for applications in quantum precision measurements and time-varying ultimate detection. The response time of an SNSPD can be characterized by aspects of hotspot thermal relaxation and electrical relaxation, which are also responsible for the time jitter of the SNSPD. The factors affecting the temporal resolution of an SNSPD, the underlying physical mechanism, the intrinsic limit, and possible optimization methods are reviewed. The poor energy resolution and lack of photon number resolution for conventional SNSPDs can be overcome by using high-impedance readouts, novel device structures, characterization methods and, most importantly, SNSPD arrays, which can simultaneously further improve the temporal resolution. The study of the temporal and photon number resolution of SNSPDs helps reveal the underlying physics and is valuable for their new application in various practical engineering areas.

Applied Physics B•Jun 5, 2024•6 citations
We present an experimental realization of a 16 element, temporal-array, photon-number-resolving (PNR) detector, which is a multiplexed single-photon detector that splits an input signal over multiple time bins, and the time bins are detected using two superconducting nanowire single-photon detectors (SNSPD). A theoretical investigation of the PNR capabilities of the detector is performed and it is concluded that, compared to a single-photon detector, our array detector can resolve one order of magnitude higher mean photon numbers, given the same number of input pulses to measure. This claim is experimentally verified and we show that the detector can accurately predict photon numbers between 10\ensuremath−3{10}^{\ensuremath{-}3}10\ensuremath−3 and 102{10}^{2}102. Our present detector is incapable of single-shot photon-number measurements with high precision since its effective quantum efficiency is 4949%49. Using SNSPDs with a higher quantum efficiency the PNR performance will improve, but the photon-number resolution will still be limited by the array size.
Photon-number-resolving (PNR) detectors are a key enabling technology in photonic quantum information processing. Here, we demonstrate the PNR capacity of conventional superconducting nanowire single-photon detectors by performing ultra-high-resolution time-tagging of the detector-generated electrical pulses. This method provides a viable approach for PNR with high detection efficiency and a high operational repetition rate. We present the implementation of such a PNR detector in the telecom C-band and its characterization by measuring the photon-number statistics of coherent light with tunable intensity. Additionally, we demonstrate the capabilities of the detection method by measuring photon-number correlations of non-classical states.
Abstract We experimentally demonstrate high-fidelity detection of 0, 1- and 2-photon states in a commercial superconducting nanowire single photon detector (SNSPD) under 20 MHz pulsed coherent illumination. The arrival of a different number of photons induces distinct temporal dynamics in the disruption of the superconducting state of the detector. Therefore, specific features emerge in the arrival-time histograms, that we show are directly correlated with the photon-number state. We show that, across a broad range of time-averaged light intensities, the probabilities of detecting 1- and 2 + -photon events collapse onto the Poisson distribution of coherent light. We identify the voltage detection threshold as a critical factor for photon number resolving (PNR) capabilities. Even under demanding conditions of high repetition rate illumination, we found that a high trigger level significantly enhances total detection fidelity, achieving 0.920 and 0.845 for 1-photon and for 2-photon events. These results correspond to remarkably low conditional misidentification probabilities, 0.000 02 and 0.0013, describing the classification error among detected 1- and 2-photon events. We identify an inherent 39 ps latency difference between single- and multi-photon detection events. We show that the measured 2-photon conditional misidentification probability corresponds to the one of a multiplexed PNR detector with 730 pixels. We believe that our findings provide a framework for developing high/fidelity spatially multiplexed SNSPD by exploiting the intrinsic PNR capabilities of individual constituting elements.
Photon number resolving (PNR) is an important capacity for detectors working in quantum and classical applications. Although a conventional superconducting nanowire single-photon detector (SNSPD) is not a PNR detector, by arranging nanowires in a series array and multiplexing photons over space, such series PNR-SNSPD can gain quasi-PNR capacity. However, the accuracy and maximum resolved photon number are both limited by the signal-to-noise ratio (SNR) of the output pulses. Here, we introduce a matched filter, which is an optimal filter in terms of SNR. Experimentally, the normalized spacing between pulse amplitudes from adjacent photon number detections increased by a maximum factor of 2.1 after the matched filter. Combining with a cryogenic amplifier to increase SNR further, such spacing increased by a maximum factor of 5.3. In contrast to a low pass filter, the matched filter gave better SNRs while maintaining low timing jitters. The minimum timing jitter of 55 ps was obtained experimentally. Our results suggest that the matched filter is a useful tool for improving the performance of the series PNR-SNSPD. The maximum resolved photon number can be expected to reach 65 or even larger.
Photon-number-resolving (PNR) is an important functionality in many applications. The traditional single photon detectors (SNSPDs) operated with the conventional readout scheme does not have the PNR functionality. In this paper, we demonstrate a superconducting photon-number-resolving detector operating at the visible wavelength regime, based on the serial connection of six superconducting nanowires. The results of our 6-element PNR device show clear evidence of n-photons differentiation with n ranging from 1 to 6. The system detection efficiency reaches 54% with the dark counts rate below 10 Hz at 660 nm. The demonstrated 6-element PNR device does not require a complex readout circuit compared with the SNSPD array device, and is expected to have wider applications in addition to imaging and communication.
Abstract Photon number resolving (PNR) capability is very important in many optical applications, including quantum information processing, fluorescence detection, and few-photon-level ranging and imaging. Superconducting nanowire single-photon detectors (SNSPDs) with a multipixel interleaved architecture give the array an excellent spatial PNR capability. However, the signal-to-noise ratio (SNR) of the PNR (SNRPNR) of the array will be degraded with increasing the element number due to the electronic noise in the readout circuit, which limits the PNR resolution as well as the maximum PNR number. In this study, a 16-element interleaved SNSPD array was fabricated, and the PNR capability of the array was investigated and analyzed. By introducing a level comparator circuit (LCC), the SNRPNR of the detector array was improved over a factor of four. In addition, we performed a statistical analysis of the photon number on this SNSPD array with LCC, showing that the LCC method effectively enhances the PNR resolution. Besides, the system timing jitter of the detector was reduced from 90 ps to 72 ps due to the improved electrical SNR.
Single-photon detectors based on superconducting nanowires (SNSPDs) are promising technologies with good comprehensive performance, especially their excellent temporal resolution for applications in quantum precision measurements and time-varying ultimate detection. The response time of an SNSPD can be characterized by aspects of hotspot thermal relaxation and electrical relaxation, which are also responsible for the time jitter of the SNSPD. The factors affecting the temporal resolution of an SNSPD, the underlying physical mechanism, the intrinsic limit, and possible optimization methods are reviewed. The poor energy resolution and lack of photon number resolution for conventional SNSPDs can be overcome by using high-impedance readouts, novel device structures, characterization methods and, most importantly, SNSPD arrays, which can simultaneously further improve the temporal resolution. The study of the temporal and photon number resolution of SNSPDs helps reveal the underlying physics and is valuable for their new application in various practical engineering areas.