Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Superconductor Science and Technology

Photon-number-resolving superconducting nanowire detectors

F. Mattioli, Zili Zhou, Alessandro Gaggero, Rosalinda Gaudio, Saeedeh Jahanmirinejad, Dondu Sahin, Francesco Marsili, Roberto Leoni, Andrea Fiore

Published Aug 24, 2015• 61 citations
Publisher

Abstract

Abstract In recent years, photon-number-resolving (PNR) detectors have attracted great interest, mainly because they can play a key role in diverse application fields. A PNR detector with a large dynamic range would represent an ideal photon detector, bringing the linear response of conventional analogue detectors down to the single-photon level. Several technologies, such as InGaAs single photon avalanche detectors (SPADs), arrays of silicon photomultipliers, InGaAs SPADs with self-differencing circuits and transition edge sensors have shown photon number resolving capability. Superconducting nanowires provide free-running single-photon sensitivity from visible to mid-infrared frequencies, low dark counts, excellent timing resolution (<60 ps) and short dead time (∼10 ns), at an easily accessible temperature (2–3 K), but they do not inherently resolve the photon number. In this framework, PNR detectors based on arrays of superconducting nanowires have been proposed. In this article we describe a number of methods and device configurations that have been pursued to obtain PNR capability using superconducting nanowire detectors.

DOI
10.1088/0953-2048/28/10/104001

Related papers

Experimental Demonstration of Superconducting Series Nanowire Photon-Number-Resolving Detector at 660 nm Wavelength

Ruiying Xu, Tao Xu, Qi Chen +11 more

Photon-number-resolving (PNR) is an important functionality in many applications. The traditional single photon detectors (SNSPDs) operated with the conventional readout scheme does not have the PNR functionality. In this paper, we demonstrate a superconducting photon-number-resolving detector operating at the visible wavelength regime, based on the serial connection of six superconducting nanowires. The results of our 6-element PNR device show clear evidence of n-photons differentiation with n ranging from 1 to 6. The system detection efficiency reaches 54% with the dark counts rate below 10 Hz at 660 nm. The demonstrated 6-element PNR device does not require a complex readout circuit compared with the SNSPD array device, and is expected to have wider applications in addition to imaging and communication.

IEEE photonics journal•Jan 24, 2019•1 citation

Resolving Photon Numbers Using Ultra-High-Resolution Timing of a Single Low-Jitter Superconducting Nanowire Detector

Sauer, Gregor, Mirco Kolarczik, Rodrigo Gómez +2 more

Photon-number-resolving (PNR) detectors are a key enabling technology in photonic quantum information processing. Here, we demonstrate the PNR capacity of conventional superconducting nanowire single-photon detectors by performing ultra-high-resolution time-tagging of the detector-generated electrical pulses. This method provides a viable approach for PNR with high detection efficiency and a high operational repetition rate. We present the implementation of such a PNR detector in the telecom C-band and its characterization by measuring the photon-number statistics of coherent light with tunable intensity. Additionally, we demonstrate the capabilities of the detection method by measuring photon-number correlations of non-classical states.

arXiv:2310.12472•Oct 19, 2023•5 citations

Resolving Photon Numbers Using a Superconducting Nanowire with Impedance-Matching Taper

Di Zhu, Marco Colangelo, Changchen Chen +4 more

Time- and number-resolved photon detection is crucial for quantum information processing. Existing photon-number-resolving (PNR) detectors usually suffer from limited timing and dark-count performance or require complex fabrication and operation. Here, we demonstrate a PNR detector at telecommunication wavelengths based on a single superconducting nanowire with an integrated impedance-matching taper. The taper provides a kΩ load impedance to the nanowire, making the detector's output amplitude sensitive to the number of photon-induced hotspots. The prototyping device was able to resolve up to four absorbed photons with 16.1 ps timing jitter and <2 c.p.s. device dark count rate. Its exceptional distinction between single- and two-photon responses is ideal for high-fidelity coincidence counting and allowed us to directly observe bunching of photon pairs from a single output port of a Hong-Ou-Mandel interferometer. This detector architecture may provide a practical solution to applications that require high timing resolution and few-photon discrimination.

arXiv:1911.09485•Nano Letters•Apr 9, 2020•103 citations

Photon-Number-Resolving Single-Photon Detector with a System Detection Efficiency of 98% and Photon-Number Resolution of 32

Chaomeng Ding, Xing-Yu Zhang, Jia-Min Xiong +8 more

High Resolution Image Download MS PowerPoint Slide Efficiently distinguishing photon numbers is a crucial yet challenging technology for various quantum information and quantum metrology applications. While superconducting transition edge sensors offer good photon-number-resolving (PNR) capabilities, they are hampered by low detection speed, timing jitter, and complex cooling and readout requirements. In this work, we present a significant advancement toward achieving high-fidelity PNR single-photon detectors by combing high efficiency superconducting nanowire single-photon detector and spatial multiplexing technology. The unique twin-layer configuration of superconducting nanowire atop a dielectric mirror ensures the near-unity detection efficiency. The segmented design, where each section is shunted by a resistor, enables spatial multiplexing, establishing a mapping relationship between pulse amplitude and registered photons. The fabricated detector exhibits impressive performance metrics, including a single-photon system detection efficiency (SDE) of ∼98% at a dark count rate of 20 cps and photon-number resolution capability up to 32. Further characterization through detector tomography reveals high fidelities for two-, three-, and four-photon events, approximately 87%, 73%, and 40% respectively. Moreover, the detector operates at a high count rate of 41 MHz at 3 dB-SDE, with a low timing jitter of as low as 40 ps. With its near-unity efficiency, high photon-number resolution, low dark count rate, fast detection speed, and superior timing resolution, we expect significant interest in these detectors, promising substantial benefits for weak light detection and optical quantum information applications.

arXiv:2504.02202•ACS Photonics•Jul 4, 2025•18 citations

Recent developments in single-photon detection with superconducting nanowires (Conference Presentation)

Karl K. Berggren

Superconducting nanowires are currently a key technology for photon sensing, with key performance metrics exceeding those of most competing technologies. For example, recently detector timing resolution of just 3 ps for single visible photons was demonstrated. In addition, infrared sensitivity has long been a key advantage of these techniques. But the field continues to change rapidly, with interesting architectures emerging that promise increased functionality in the same form factor. For example, imaging, photon-number-resolution, and spectroscopy are all promising directions the field is now pursuing. In this review, I will explain the technology, applications, and background device physics, but also touch on some of the latest new developments.

Advanced Photon Counting Techniques•Apr 27, 2020•0 citations

Improving photon number resolvability of a superconducting nanowire single-photon detector array using a level comparator circuit

Jia Huang, Xingyu Zhang, Weijun Zhang +7 more

Abstract Photon number resolving (PNR) capability is very important in many optical applications, including quantum information processing, fluorescence detection, and few-photon-level ranging and imaging. Superconducting nanowire single-photon detectors (SNSPDs) with a multipixel interleaved architecture give the array an excellent spatial PNR capability. However, the signal-to-noise ratio (SNR) of the PNR (SNRPNR) of the array will be degraded with increasing the element number due to the electronic noise in the readout circuit, which limits the PNR resolution as well as the maximum PNR number. In this study, a 16-element interleaved SNSPD array was fabricated, and the PNR capability of the array was investigated and analyzed. By introducing a level comparator circuit (LCC), the SNRPNR of the detector array was improved over a factor of four. In addition, we performed a statistical analysis of the photon number on this SNSPD array with LCC, showing that the LCC method effectively enhances the PNR resolution. Besides, the system timing jitter of the detector was reduced from 90 ps to 72 ps due to the improved electrical SNR.

Superconductor Science and Technology•Apr 9, 2024•7 citations
Abstract In recent years, photon-number-resolving (PNR) detectors have attracted great interest, mainly because they can play a key role in diverse application fields. A PNR detector with a large dynamic range would represent an ideal photon detector, bringing the linear response of conventional analogue detectors down to the single-photon level. Several technologies, such as InGaAs single photon avalanche detectors (SPADs), arrays of silicon photomultipliers, InGaAs SPADs with self-differencing circuits and transition edge sensors have shown photon number resolving capability. Superconducting nanowires provide free-running single-photon sensitivity from visible to mid-infrared frequencies, low dark counts, excellent timing resolution (<60 ps) and short dead time (∼10 ns), at an easily accessible temperature (2–3 K), but they do not inherently resolve the photon number. In this framework, PNR detectors based on arrays of superconducting nanowires have been proposed. In this article we describe a number of methods and device configurations that have been pursued to obtain PNR capability using superconducting nanowire detectors.
Photon-number-resolving (PNR) is an important functionality in many applications. The traditional single photon detectors (SNSPDs) operated with the conventional readout scheme does not have the PNR functionality. In this paper, we demonstrate a superconducting photon-number-resolving detector operating at the visible wavelength regime, based on the serial connection of six superconducting nanowires. The results of our 6-element PNR device show clear evidence of n-photons differentiation with n ranging from 1 to 6. The system detection efficiency reaches 54% with the dark counts rate below 10 Hz at 660 nm. The demonstrated 6-element PNR device does not require a complex readout circuit compared with the SNSPD array device, and is expected to have wider applications in addition to imaging and communication.
Photon-number-resolving (PNR) detectors are a key enabling technology in photonic quantum information processing. Here, we demonstrate the PNR capacity of conventional superconducting nanowire single-photon detectors by performing ultra-high-resolution time-tagging of the detector-generated electrical pulses. This method provides a viable approach for PNR with high detection efficiency and a high operational repetition rate. We present the implementation of such a PNR detector in the telecom C-band and its characterization by measuring the photon-number statistics of coherent light with tunable intensity. Additionally, we demonstrate the capabilities of the detection method by measuring photon-number correlations of non-classical states.
Time- and number-resolved photon detection is crucial for quantum information processing. Existing photon-number-resolving (PNR) detectors usually suffer from limited timing and dark-count performance or require complex fabrication and operation. Here, we demonstrate a PNR detector at telecommunication wavelengths based on a single superconducting nanowire with an integrated impedance-matching taper. The taper provides a kΩ load impedance to the nanowire, making the detector's output amplitude sensitive to the number of photon-induced hotspots. The prototyping device was able to resolve up to four absorbed photons with 16.1 ps timing jitter and <2 c.p.s. device dark count rate. Its exceptional distinction between single- and two-photon responses is ideal for high-fidelity coincidence counting and allowed us to directly observe bunching of photon pairs from a single output port of a Hong-Ou-Mandel interferometer. This detector architecture may provide a practical solution to applications that require high timing resolution and few-photon discrimination.
High Resolution Image Download MS PowerPoint Slide Efficiently distinguishing photon numbers is a crucial yet challenging technology for various quantum information and quantum metrology applications. While superconducting transition edge sensors offer good photon-number-resolving (PNR) capabilities, they are hampered by low detection speed, timing jitter, and complex cooling and readout requirements. In this work, we present a significant advancement toward achieving high-fidelity PNR single-photon detectors by combing high efficiency superconducting nanowire single-photon detector and spatial multiplexing technology. The unique twin-layer configuration of superconducting nanowire atop a dielectric mirror ensures the near-unity detection efficiency. The segmented design, where each section is shunted by a resistor, enables spatial multiplexing, establishing a mapping relationship between pulse amplitude and registered photons. The fabricated detector exhibits impressive performance metrics, including a single-photon system detection efficiency (SDE) of ∼98% at a dark count rate of 20 cps and photon-number resolution capability up to 32. Further characterization through detector tomography reveals high fidelities for two-, three-, and four-photon events, approximately 87%, 73%, and 40% respectively. Moreover, the detector operates at a high count rate of 41 MHz at 3 dB-SDE, with a low timing jitter of as low as 40 ps. With its near-unity efficiency, high photon-number resolution, low dark count rate, fast detection speed, and superior timing resolution, we expect significant interest in these detectors, promising substantial benefits for weak light detection and optical quantum information applications.
Superconducting nanowires are currently a key technology for photon sensing, with key performance metrics exceeding those of most competing technologies. For example, recently detector timing resolution of just 3 ps for single visible photons was demonstrated. In addition, infrared sensitivity has long been a key advantage of these techniques. But the field continues to change rapidly, with interesting architectures emerging that promise increased functionality in the same form factor. For example, imaging, photon-number-resolution, and spectroscopy are all promising directions the field is now pursuing. In this review, I will explain the technology, applications, and background device physics, but also touch on some of the latest new developments.
Abstract Photon number resolving (PNR) capability is very important in many optical applications, including quantum information processing, fluorescence detection, and few-photon-level ranging and imaging. Superconducting nanowire single-photon detectors (SNSPDs) with a multipixel interleaved architecture give the array an excellent spatial PNR capability. However, the signal-to-noise ratio (SNR) of the PNR (SNRPNR) of the array will be degraded with increasing the element number due to the electronic noise in the readout circuit, which limits the PNR resolution as well as the maximum PNR number. In this study, a 16-element interleaved SNSPD array was fabricated, and the PNR capability of the array was investigated and analyzed. By introducing a level comparator circuit (LCC), the SNRPNR of the detector array was improved over a factor of four. In addition, we performed a statistical analysis of the photon number on this SNSPD array with LCC, showing that the LCC method effectively enhances the PNR resolution. Besides, the system timing jitter of the detector was reduced from 90 ps to 72 ps due to the improved electrical SNR.