Low-density parity-check (LDPC) codes have the potential for applications in future high throughput optical communications due to their significant error correction capability and the parallel decoding. However, they are not able to satisfy the very low bit error rate (BER) requirement due to the error floor phenomenon. In this paper, we propose a low-complexity iterative decoding scheme for product codes consisting of very high rate outer codes and LDPC codes. The outer codes aim at eliminating the residual error floor of LDPC codes with quite low implementation costs. Furthermore, considering the long simulation time of computer simulation for evaluating very low BER, the hardware platform is built to accelerate the evaluation of the proposed iterative decoding methods. Simultaneously, the fixed-point effects of the decoding algorithms are also be evaluated. The experimental results show that the iterative decoding of the product codes can achieve a quite low bit error rate. The evaluation using field programmable gate array (FPGA) also proves that product codes with LDPC codes and high-rate algebraic codes can achieve a good trade-off between complexity and throughput.
Low-density parity-check (LDPC) codes have the potential for applications in future high throughput optical communications due to their significant error correction capability and the parallel decoding. However, they are not able to satisfy the very low bit error rate (BER) requirement due to the error floor phenomenon. In this paper, we propose a low-complexity iterative decoding scheme for product codes consisting of very high rate outer codes and LDPC codes. The outer codes aim at eliminating the residual error floor of LDPC codes with quite low implementation costs. Furthermore, considering the long simulation time of computer simulation for evaluating very low BER, the hardware platform is built to accelerate the evaluation of the proposed iterative decoding methods. Simultaneously, the fixed-point effects of the decoding algorithms are also be evaluated. The experimental results show that the iterative decoding of the product codes can achieve a quite low bit error rate. The evaluation using field programmable gate array (FPGA) also proves that product codes with LDPC codes and high-rate algebraic codes can achieve a good trade-off between complexity and throughput.
After the introduction of iterative coding, Low Density Parity Check (LDPC) codes have received a lot of attention due to their remarkable near Shannon-limit performance and practical decoder implementation. However, when employing an LDPC code for various applications, multiple issues do arise at the simulation, algorithm and implementation levels. The first issue is the performance evaluation of the iterative LDPC decoder in the very low Bit Error Rate (BER) regions. So far, no analytical tool has been developed to evaluate the performance of LDPC codes. Unfortunately standard Monte Carlo (MC) simulations cannot be used for performance estimation in these low BER regions due to prohibitive execution times. The second issue is the efficiency of the decoding algorithm. Due to the presence of short cycles in the bipartite graph, sum-product decoding algorithms lead to considerable performance loss for short block-length LDPC codes and produce error floors for longer codes. In addition, the iterative processing and estimation of soft probabilistic values with these algorithms result in very high computational complexity, which in turn impedes the adoption of LDPC codes for power constrained systems. Another prime objective is to design a high throughput decoder architecture which is capable of supporting multiple rates and variable code lengths within minimal area.
This work aims to address and provide solutions to the above problems. As a solution to the performance estimation problem of LDPC codes, a highly efficient and novel fast BER simulation technique is developed. At the algorithm level, a performance improvement and error floor avoidance method is introduced, and a computationally efficient algorithm is developed for the sum-product decoding of LDPC codes. And finally, at the architecture level, a high throughput multi-rate variable code length implementation is presented which, when implemented, efficiently minimizes device resources while alleviating the routing complexity of the decoder.
With the superior error correction capability, low-density parity-check (LDPC) codes have initiated wide scale interests in satellite communication, wireless communication, and storage fields. In the past, various structures of single code-rate LDPC decoders have been reported. However, to cover a wide range of service requirements and diverse interference conditions in wireless applications, LDPC decoders that can operate at both high and low code rates are desirable. In this paper, a 9-k code length multi-rate LDPC decoder architecture is presented and implemented on a Xilinx field-programmable gate array device. Using pin selection, three operating modes, namely, the irregular 1/2 code mode, the regular 5/8 code mode, and the regular 7/8 code mode, are supported. Furthermore, to suppress the error floor level, a characterization on the conditions for short cycles in a LDPC code matrix expanded from a small base matrix is presented, and a cycle elimination algorithm is developed to detect and break such short cycles. The effectiveness of the cycle elimination algorithm has been verified by both simulation and hardware measurements, which show that the error floor is suppressed to a much lower level without incurring any performance penalty. The implemented decoder is tested in an experimental LDPC orthogonal frequency division multiplexing system and achieves the superior measured performance of block error rate below 10/sup -7/ at signal-to-noise ratio of 1.8 dB.
Binary Low-Density Parity-Check (LDPC) codes are a type of error correction code known to exhibit excellent error-correcting capabilities, and have increasingly been applied as the forward error correction solution in a multitude of systems and standards, such as wireless communications, wireline communications, and data storage systems. In the pursuit of codes with even higher coding gain, non-binary LDPC (NB-LDPC) codes defined over a Galois field of order q have risen as a strong replacement candidate. For codes defined with similar rate and length, NB-LDPC codes exhibit a significant coding gain improvement relative to that of their binary counterparts.Unfortunately, NB-LDPC codes are currently limited from practical application by the immense complexity of their decoding algorithms, because the improved error-rate performance of higher field orders comes at the cost of increasing decoding algorithm complexity. Currently available ASIC implementation solutions for NB-LDPC code decoders are simultaneously low in throughput and power-hungry, leading to a low energy efficiency.We propose several techniques at the algorithm level as well as hardware architecture level in an attempt to bring NB-LDPC codes closer to practical deployment. On the algorithm side, we propose several algorithmic modifications and analyze the corresponding hardware cost alleviation as well as impact on coding gain. We also study the quantization scheme for NB-LDPC decoders, again in the context of both the hardware and coding gain impacts, and we propose a technique that enables a good tradeoff in this space. On the hardware side, we develop a FPGA-based NB-LDPC decoder platform for architecture prototyping as well as hardware acceleration of code evaluation via error rate simulations. We also discuss the architectural techniques and innovations corresponding to our proposed algorithm for optimization of the implementation. Finally, a proof-of-concept ASIC chip is realized that integrates many of the proposed techniques. We are able to achieve a 3.7x improvement in the information throughput and 23.8x improvement in the energy efficiency over prior state-of-the-art, without sacrificing the strong error correcting capabilities of the NB-LDPC code.
Low Density Parity Check (LDPC) codes are considered to be one of the best classes of error-correcting codes. This thesis deals with two major issues in LDPC codes: decoder design to enhance error correction performance and efficient decoder implementation. Five techniques have been introduced in this thesis. First, an efficient platform for LDPC code design and performance evaluation is developed. This platform implements parallel simulation algorithms to efficiently evaluate the performance of the proposed algorithms for LDPC decoders and code design. Second, an innovative technique is introduced to improve the performance of LDPC decoding in the error-floor region. Special structures in the code graph, called trapping sets, are considered to be the major source of decoding errors in the error-floor region. The proposed technique is based on eliminating the negative effect of trapping sets during LDPC decoding. As a third contribution, a novel approach to improve the decoder performance and/or throughput is introduced. This approach is based on utilizing LDPC decoder idle times by introducing two queues: one at the decoder input and the other at the decoder output. This architecture enables the decoder to run extra iterations beyond the conventional maximum allowable iterations. The fourth proposed technique reduces the bit error rate of LDPC decoders. This technique is based on tracking the number of failed parity check equations in the intermediate decoding iterations, rather than only relying on the final decoder output (after reaching the maximum number of iterations). The last proposed technique deals with the construction of interconnect efficient fully-parallel LDPC codes with high error correction performance. Fully-parallel implementation is very hard due to the complexity of processing elements interconnections. The proposed technique is based on constructing LDPC codes with less complex interconnections and with low impact on the error correction performance. This goal is achieved by putting a constraint on the maximum connection length between any two processing elements.
The performance of a high-throughput long-distance communication system such as an optical transmission system is limited by the Net Coding Gain (NCG) of the Forward Error Correction (FEC) system. Summarizing the previous research works, Low-Density Parity-Check (LDPC) codes form one of the most promising FEC schemes to be applied in high-throughput communication systems. Designing a practical channel coding scheme with high code rate, low complexity, high throughput and extremely low error floor has always been a very challenging problem. Quasi-cyclic low-density parity-check (QC-LDPC) codes have been promising candidates to fulfill the above requirements but the implementation issues remain. In this paper, we propose a layered QC-LDPC decoder architecture with high code rate, low complexity, high throughput and excellent error performance. The architecture has been implemented using FPGA and the error performance has been shown to be good.
Low-density parity check (LDPC) codes with their near-Shannon capacity limit error correcting performance and iterative decoding algorithm are being evaluated for digital communications applications. For LDPC codes to be used in real systems, their error floors need to be investigated. In this paper, we evaluate the performance of disjoint difference set (DDS)-based LDPC codes (with column weights 3, 4, 5) and array code-based LDPC codes (with column weights 3, 4, 5) in the additive white Gaussian noise (AWGN) channel using a high-speed field programmable gate array (FPGA) simulation platform. The error floor regions (bit error rates down to 10/sup -12/) of those codes are presented. For better performance of array codes, a girth optimization method is proposed and the FPGA evaluation results are presented.