© 2026 Aqora Quantum S.A.S.

Terms Privacy Legal Notice

Applied Optics

Efficient C-band single-photon upconversion with chip-scale Ti-indiffused pp-LiNbO3 waveguides

Zhenda Xie, Kai Luo, Kai-Chi Chang, Nicolae Coriolan Panoiu, Harald Herrmann, Christine Silberhorn, Chee Wei Wong

Published Jul 22, 2019• 7 citations

Abstract

Frequency upconversion for single photons at telecom wavelengths is important to simultaneously meet the different wavelength requirements for long-distance communications and quantum memories in a quantum nodal network. It also enables the detection for the telecom "flying qubit" photons with silicon-based efficient single-photon detectors with low dark count (DC) rates. Here, we demonstrate the frequency upconversion of attenuated single photons, using a low-loss titanium-indiffused periodically poled lithium niobate waveguide, pumped with a readily available erbium-doped fiber amplifier in the L-band. Internal and conversion efficiencies up to 84.4% and 49.9% have been achieved, respectively. The DC rates are suppressed down to 44 kHz at 13.9% end-to-end quantum efficiency (including full conversion and detection), enabled by our long-wavelength pump configuration and narrow 3.5-GHz bandpass filtering.

DOI: 10.1364/ao.58.005910

Related papers

Efficient single-photon frequency upconversion at telecommunication wavelengths with Ti-indiffused periodically-poled LiNbO 3 waveguides

Zhenda Xie, Kai-Hong Luo, Harald Herrmann +2 more

We demonstrate single-photon frequency-upconversion using a titanium-infused periodically-poled lithium niobate waveguide by L-band erbium-doped fiber amplifier pump. Internal efficiencies up to 84.4% and dark-count rate of 44kHz are achieved with narrowband filtering down to 3.5GHz.

Conference on Lasers and Electro-Optics•May 10, 2015•1 citation

Low noise single photon frequency upconversion using Ti-indiffused periodically-poled lithium niobate waveguides with efficient narrowband filtering

Zhenda Xie, Kai-Hong Luo, Harald Herrmann +2 more

We demonstrate single-photon frequency-upconversion using a titanium-infused periodically-poled lithium niobate waveguide by L-band erbium-doped fiber amplifier pump. Internal efficiencies up to 84.4% and dark-count rate of 44kHz are achieved with narrowband filtering down to 3.5GHz.

•Jan 1, 2015•1 citation

Efficient and low-noise single-photon detection in 1550 nm communication band by frequency upconversion in periodically poled LiNbO_3 waveguides

Hidehiko Kamada, Masaki Asobe, Toshimori Honjo +5 more

We demonstrate 1500 nm band single-photon detection with low dark-count noise and a potentially high efficiency, which may allow long distance and high-bit-rate quantum key distribution. By developing frequency upconversion devices based on periodically poled lithium niobate waveguides, which are specifically designed to use a pump wavelength longer than that of communication-band photons, we completely eliminate the dark-count noise caused by parasitic nonlinear processes in the waveguide. We observed an internal conversion efficiency as high as 40% and demonstrated scaling down to the single photon level while maintaining a background dark-count rate of 10(2)s(-1).

Optics Letters•Mar 18, 2008•50 citations

Long-wavelength-pumped upconversion single-photon detector at 1550 nm: performance and noise analysis

Jason S. Pelc, Long Ma, Christopher R. Phillips +5 more

We demonstrate upconversion-assisted single-photon detection for the 1.55-μm telecommunications band based on a periodically poled lithium niobate (PPLN) waveguide pumped by a monolithic PPLN optical parametric oscillator. We achieve an internal conversion efficiency of 86%, which results in an overall system detection efficiency of 37%, with excess noise as low as 10(3) counts s(-1). We measure the dark count rate versus the upconversion pump-signal frequency separation and find the results to be consistent with noise photon generation by spontaneous anti-Stokes Raman scattering. These results enable detailed design guidelines for the development of low-noise quantum frequency conversion systems, which will be an important component of fiber-optic quantum networks.

Optics Express•Oct 17, 2011•242 citations

Highly efficient single-photon detection at communication wavelengths by use of upconversion in reverse-proton-exchanged periodically poled LiNbO_3 waveguides

Carsten Langrock, Eleni Diamanti, Rostislav V. Roussev +3 more

Conventional single-photon detectors at communication wavelengths suffer from low quantum efficiencies and large dark counts. We present a single-photon detection system, operating at communication wavelengths, based on guided-wave frequency upconversion in a nonlinear crystal with an overall system detection efficiency (upconversion + detection) exceeding 46% at 1.56 microm. This system consists of a fiber-pigtailed reverse-proton-exchanged periodically poled LiNbO3 waveguide device in conjunction with a silicon-based single-photon counting module.

Optics Letters•Jul 1, 2005•321 citations

Ultra-low Noise Upconversion Single-Photon Detector in the Telecom Band

Guo-Liang Shentu, Jason S. Pelc, Xiao-Dong Wang +3 more

We demonstrate upconversion single-photon detection for the 1550-nm band using a PPLN waveguide, long-wavelength pump, and narrowband filtering. We achieve total-system detection efficiency of 30% with noise at the dark-count level of a silicon APD.

The Rochester Conferences on Coherence and Quantum Optics and the Quantum Information and Measurement meeting•Jan 1, 2013•0 citations

Frequency upconversion for single photons at telecom wavelengths is important to simultaneously meet the different wavelength requirements for long-distance communications and quantum memories in a quantum nodal network. It also enables the detection for the telecom "flying qubit" photons with silicon-based efficient single-photon detectors with low dark count (DC) rates. Here, we demonstrate the frequency upconversion of attenuated single photons, using a low-loss titanium-indiffused periodically poled lithium niobate waveguide, pumped with a readily available erbium-doped fiber amplifier in the L-band. Internal and conversion efficiencies up to 84.4% and 49.9% have been achieved, respectively. The DC rates are suppressed down to 44 kHz at 13.9% end-to-end quantum efficiency (including full conversion and detection), enabled by our long-wavelength pump configuration and narrow 3.5-GHz bandpass filtering.

We demonstrate 1500 nm band single-photon detection with low dark-count noise and a potentially high efficiency, which may allow long distance and high-bit-rate quantum key distribution. By developing frequency upconversion devices based on periodically poled lithium niobate waveguides, which are specifically designed to use a pump wavelength longer than that of communication-band photons, we completely eliminate the dark-count noise caused by parasitic nonlinear processes in the waveguide. We observed an internal conversion efficiency as high as 40% and demonstrated scaling down to the single photon level while maintaining a background dark-count rate of 10(2)s(-1).

We demonstrate upconversion-assisted single-photon detection for the 1.55-μm telecommunications band based on a periodically poled lithium niobate (PPLN) waveguide pumped by a monolithic PPLN optical parametric oscillator. We achieve an internal conversion efficiency of 86%, which results in an overall system detection efficiency of 37%, with excess noise as low as 10(3) counts s(-1). We measure the dark count rate versus the upconversion pump-signal frequency separation and find the results to be consistent with noise photon generation by spontaneous anti-Stokes Raman scattering. These results enable detailed design guidelines for the development of low-noise quantum frequency conversion systems, which will be an important component of fiber-optic quantum networks.

Conventional single-photon detectors at communication wavelengths suffer from low quantum efficiencies and large dark counts. We present a single-photon detection system, operating at communication wavelengths, based on guided-wave frequency upconversion in a nonlinear crystal with an overall system detection efficiency (upconversion + detection) exceeding 46% at 1.56 microm. This system consists of a fiber-pigtailed reverse-proton-exchanged periodically poled LiNbO3 waveguide device in conjunction with a silicon-based single-photon counting module.