© 2026 Aqora Quantum S.A.S.

Terms Privacy Legal Notice

Optics Letters

Efficient and low-noise single-photon detection in 1550 nm communication band by frequency upconversion in periodically poled LiNbO_3 waveguides

Hidehiko Kamada, Masaki Asobe, Toshimori Honjo, Hiroki Takesue, Y. Tokura, Y. Nishida, Osamu Tadanaga, H. Miyazawa

Published Mar 18, 2008• 50 citations

Abstract

We demonstrate 1500 nm band single-photon detection with low dark-count noise and a potentially high efficiency, which may allow long distance and high-bit-rate quantum key distribution. By developing frequency upconversion devices based on periodically poled lithium niobate waveguides, which are specifically designed to use a pump wavelength longer than that of communication-band photons, we completely eliminate the dark-count noise caused by parasitic nonlinear processes in the waveguide. We observed an internal conversion efficiency as high as 40% and demonstrated scaling down to the single photon level while maintaining a background dark-count rate of 10(2)s(-1).

DOI: 10.1364/ol.33.000639

Related papers

Long-wavelength-pumped upconversion single-photon detector at 1550 nm: performance and noise analysis

Jason S. Pelc, Long Ma, Christopher R. Phillips +5 more

We demonstrate upconversion-assisted single-photon detection for the 1.55-μm telecommunications band based on a periodically poled lithium niobate (PPLN) waveguide pumped by a monolithic PPLN optical parametric oscillator. We achieve an internal conversion efficiency of 86%, which results in an overall system detection efficiency of 37%, with excess noise as low as 10(3) counts s(-1). We measure the dark count rate versus the upconversion pump-signal frequency separation and find the results to be consistent with noise photon generation by spontaneous anti-Stokes Raman scattering. These results enable detailed design guidelines for the development of low-noise quantum frequency conversion systems, which will be an important component of fiber-optic quantum networks.

Optics Express•Oct 17, 2011•242 citations

Optimizing up-conversion single-photon detectors for quantum key distribution

Ni Yao, Quan Yao, Xiu-Ping Xie +8 more

High-performance single-photon detectors (SPDs) at 1550-nm band are critical for fiber-based quantum communications. Among many types of SPDs, the up-conversion SPDs based on periodically poled lithium niobate waveguides are of great interest. Combined with a strong pump laser, the telecom single-photons are converted into short wavelength ones and detected by silicon-based SPDs. However, due to the difficulty of precise controlling waveguide profile, the direct coupling between a single-mode fiber and the waveguide is not efficient. Here by utilizing fiber taper with proper diameter, optimal mode-matching is achieved and coupling efficiency up to 93% is measured. With an optimized design, a system detection efficiency of 36% and noise counting rate of 90 cps are realized. The maximum detection efficiency is characterized as 40% with a noise counting rate of 200 cps. Numerical simulation results indicate that our device can significantly improve the performance of QKD and extend the communication distance longer than 200 km.

Optics Express•Aug 3, 2020•21 citations

Highly efficient single-photon detection at communication wavelengths by use of upconversion in reverse-proton-exchanged periodically poled LiNbO_3 waveguides

Carsten Langrock, Eleni Diamanti, Rostislav V. Roussev +3 more

Conventional single-photon detectors at communication wavelengths suffer from low quantum efficiencies and large dark counts. We present a single-photon detection system, operating at communication wavelengths, based on guided-wave frequency upconversion in a nonlinear crystal with an overall system detection efficiency (upconversion + detection) exceeding 46% at 1.56 microm. This system consists of a fiber-pigtailed reverse-proton-exchanged periodically poled LiNbO3 waveguide device in conjunction with a silicon-based single-photon counting module.

Optics Letters•Jul 1, 2005•321 citations

Low noise single photon frequency upconversion using Ti-indiffused periodically-poled lithium niobate waveguides with efficient narrowband filtering

Zhenda Xie, Kai-Hong Luo, Harald Herrmann +2 more

We demonstrate single-photon frequency-upconversion using a titanium-infused periodically-poled lithium niobate waveguide by L-band erbium-doped fiber amplifier pump. Internal efficiencies up to 84.4% and dark-count rate of 44kHz are achieved with narrowband filtering down to 3.5GHz.

•Jan 1, 2015•1 citation

Efficient C-band single-photon upconversion with chip-scale Ti-indiffused pp-LiNbO3 waveguides

Zhenda Xie, Kai Luo, Kai-Chi Chang +4 more

Frequency upconversion for single photons at telecom wavelengths is important to simultaneously meet the different wavelength requirements for long-distance communications and quantum memories in a quantum nodal network. It also enables the detection for the telecom "flying qubit" photons with silicon-based efficient single-photon detectors with low dark count (DC) rates. Here, we demonstrate the frequency upconversion of attenuated single photons, using a low-loss titanium-indiffused periodically poled lithium niobate waveguide, pumped with a readily available erbium-doped fiber amplifier in the L-band. Internal and conversion efficiencies up to 84.4% and 49.9% have been achieved, respectively. The DC rates are suppressed down to 44 kHz at 13.9% end-to-end quantum efficiency (including full conversion and detection), enabled by our long-wavelength pump configuration and narrow 3.5-GHz bandpass filtering.

Applied Optics•Jul 22, 2019•7 citations

Long-wavelength-pumped single-photon detector based on frequency up-conversion in MgO-doped periodically-poled LiNbO3 waveguide reaching ultralow dark count rates

Da Li, Guan Sun, Yujie J. Ding +1 more

We implemented single-photon detector in 1500-nm band based on frequency up-conversion in nonlinear waveguide at pump wavelength of 1920 nm. Ultralow dark count rate and signal photon detection rate are 20 s−1 and 56.8 s−1.

•Jan 1, 2013•0 citations

We demonstrate 1500 nm band single-photon detection with low dark-count noise and a potentially high efficiency, which may allow long distance and high-bit-rate quantum key distribution. By developing frequency upconversion devices based on periodically poled lithium niobate waveguides, which are specifically designed to use a pump wavelength longer than that of communication-band photons, we completely eliminate the dark-count noise caused by parasitic nonlinear processes in the waveguide. We observed an internal conversion efficiency as high as 40% and demonstrated scaling down to the single photon level while maintaining a background dark-count rate of 10(2)s(-1).

We demonstrate upconversion-assisted single-photon detection for the 1.55-μm telecommunications band based on a periodically poled lithium niobate (PPLN) waveguide pumped by a monolithic PPLN optical parametric oscillator. We achieve an internal conversion efficiency of 86%, which results in an overall system detection efficiency of 37%, with excess noise as low as 10(3) counts s(-1). We measure the dark count rate versus the upconversion pump-signal frequency separation and find the results to be consistent with noise photon generation by spontaneous anti-Stokes Raman scattering. These results enable detailed design guidelines for the development of low-noise quantum frequency conversion systems, which will be an important component of fiber-optic quantum networks.

High-performance single-photon detectors (SPDs) at 1550-nm band are critical for fiber-based quantum communications. Among many types of SPDs, the up-conversion SPDs based on periodically poled lithium niobate waveguides are of great interest. Combined with a strong pump laser, the telecom single-photons are converted into short wavelength ones and detected by silicon-based SPDs. However, due to the difficulty of precise controlling waveguide profile, the direct coupling between a single-mode fiber and the waveguide is not efficient. Here by utilizing fiber taper with proper diameter, optimal mode-matching is achieved and coupling efficiency up to 93% is measured. With an optimized design, a system detection efficiency of 36% and noise counting rate of 90 cps are realized. The maximum detection efficiency is characterized as 40% with a noise counting rate of 200 cps. Numerical simulation results indicate that our device can significantly improve the performance of QKD and extend the communication distance longer than 200 km.

Conventional single-photon detectors at communication wavelengths suffer from low quantum efficiencies and large dark counts. We present a single-photon detection system, operating at communication wavelengths, based on guided-wave frequency upconversion in a nonlinear crystal with an overall system detection efficiency (upconversion + detection) exceeding 46% at 1.56 microm. This system consists of a fiber-pigtailed reverse-proton-exchanged periodically poled LiNbO3 waveguide device in conjunction with a silicon-based single-photon counting module.

Frequency upconversion for single photons at telecom wavelengths is important to simultaneously meet the different wavelength requirements for long-distance communications and quantum memories in a quantum nodal network. It also enables the detection for the telecom "flying qubit" photons with silicon-based efficient single-photon detectors with low dark count (DC) rates. Here, we demonstrate the frequency upconversion of attenuated single photons, using a low-loss titanium-indiffused periodically poled lithium niobate waveguide, pumped with a readily available erbium-doped fiber amplifier in the L-band. Internal and conversion efficiencies up to 84.4% and 49.9% have been achieved, respectively. The DC rates are suppressed down to 44 kHz at 13.9% end-to-end quantum efficiency (including full conversion and detection), enabled by our long-wavelength pump configuration and narrow 3.5-GHz bandpass filtering.