© 2026 Aqora Quantum S.A.S.

Terms Privacy Legal Notice

Superconductor Science and Technology

Inductance analysis of superconducting quantum interference devices with 3D nano-bridge junctions

Hao Wang, Ruoting Yang, Guanqun Li, Long Wu, Xiaoyu Liu, Lei Chen, Jie Ren, Zhen Wang

Published Mar 28, 2018• 9 citations

Abstract

Abstract Superconducting quantum interference devices (SQUIDs) with 3D nano-bridge junctions can be miniaturized into nano-SQUIDs that are able to sense a few spins in a large magnetic field. Among all device parameters, the inductance is key to the performance of SQUIDs with 3D nano-bridge junctions. Here, we measured the critical-current magnetic flux modulation curves of 12 devices with three design types using a current strip-line directly coupled to the SQUID loop. A best flux modulation depth of 71% was achieved for our 3D Nb SQUID. From the modulation curves, we extracted the inductance values of the current stripe-line in each design and compared them with the corresponding simulation results of InductEX. In this way, London penetration depths of 110 and 420 nm were determined for our Nb (niobium) and NbN (niobium nitride) films, respectively. Furthermore, we showed that inductances of 11 and 119 pH for Nb and NbN 3D nano-bridge junctions, respectively, dominated the total inductance of our SQUID loops which are 23 pH for Nb and 255 pH for NbN. A screening parameter being equal to one suggests optimal critical currents of 89.6 and 8.1 μ A for Nb and NbN SQUIDs, respectively. Additionally, intrinsic flux noise of 110 ± 40 n Φ 0 /(Hz) 1/2 is calculated for the Nb SQUIDs with 3D nano-bridge junctions by Langevin simulation.

DOI: 10.1088/1361-6668/aaba67

Related papers

A High-Performance Nb Nano-Superconducting Quantum Interference Device with a Three-Dimensional Structure

Lei Chen, Hao Wang, Xiaoyu Liu +2 more

A superconducting quantum interference device (SQUID) miniaturized into the nanoscale is promising in the inductive detection of a single electron spin. A nano-SQUID with a strong spin coupling coefficient, a low flux noise, and a wide working magnetic field range is highly desired in a single spin resonance measurement. Nano-SQUIDs with Dayem bridge junctions excel in a high working field range and in the direct coupling from spins to the bridge. However, the common planar structure of nano-SQUIDs is known for problems such as a shallow flux modulation depth and a troublesome hysteresis in current–voltage curves. Here, we developed a fabrication process for creating three-dimensional (3-D) niobium (Nb) nano-SQUIDs with nanobridge junctions that can be tuned independently. Characterization of the device shows up to 45.9% modulation depth with a reversible current–voltage curve. Owning to the large modulation depth, the measured flux noise is as low as 0.34 μΦ 0 /Hz 1/2 . The working field range of the SQUID is greater than 0.5 T parallel to the SQUID plane. We believe that 3-D Nb nano-SQUIDs provide a promising step toward effective single-spin inductive detection.

arXiv:1612.08149•Nano Letters•Nov 7, 2016•33 citations

Fabrication and Characterization of Miniaturized NbN Superconducting Quantum Interference Devices With Nanobridge Junctions

Hao Wang, Lei Chen, Xiaoyu Liu +4 more

Reduction of the size of the superconducting quantum interference device (SQUID) ring structure improves its sensitivity to magnetic moments. Nanobridge junctions are advantageous for SQUID miniaturization. However, many planar SQUIDs with nanobridge junctions have shallow flux modulation depths because of their nonideal Josephson current-phase relationships. Here, we fabricated a three-dimensional niobium nitride (NbN) miniaturized SQUID in which the nanobridge junction structures are much thinner than the superconducting ring. We grew a thick superconducting NbN film on a silicon wafer and embedded an insulating slit in the middle of the film. By setting two thin nanobridge junctions across this insulating slit, we were able to manufacture NbN miniaturized SQUIDs that, in principle, can become nano-SQUIDs. The flux modulation depths of these devices reached 36% at 4.2 K. In addition, the fabricated devices show reversible current-voltage characteristics in the absence of any shunting resistance.

IEEE Transactions on Applied Superconductivity•Jan 18, 2017•10 citations

Measurement of Inductance in Niobium Nitride Films for Single Flux Quantum Circuits

Xin Tang, Huiwu Wang, Yingyi Shao +3 more

In recent years, rapid single flux quantum (RSFQ) circuits, which are promising for the development of high-speed digital electronics, have attracted widespread interest. Niobium nitride (NbN) films have also attracted significant attention for high-frequency applications in superconducting electronics because of their superior material parameters, including their high critical temperature Tc and large gap voltage Vg. To enable the development of all-NbN SFQ circuits, we have developed a fabrication process based on NbN junctions and inductors made of NbN strip lines. It is important to evaluate the inductance because it can affect the performance of an RSFQ circuit and is essential for the RSFQ design. We measured the inductance properties of both epitaxial and polycrystalline NbN strip lines using a superconducting quantum interference device modulation technique at 4.2 K and obtained the width dependence on the inductance of the NbN films. The penetration depth was then calculated from these measurements. The NbN inductance values were calculated numerically with respect to the penetration depth and were then compared with the measured values from the experiments. It was demonstrated that the differences between these values were within 5%. The results reported here will be useful for the design and fabrication of all-NbN RSFQ circuits.

IEEE Transactions on Applied Superconductivity•Aug 17, 2020•9 citations

Fabrication and Evaluation of Superconducting Quantum Interference Devices with Nb/Al–AlOx–Al/Nb Edge Junctions

Naoki Mizutani, Shuichi Yamasaki, Youichi Takada +2 more

We have fabricated superconducting quantum interference devices (SQUIDs) with an inductance of 140 pH by using sub- µm Nb/Al–AlO x –Al/Nb edge junctions. The small capacitance of the junction resulted in the very large voltage swing of 210 µV and gradient dV/ dΦ of 940 µV/Φ0. Consequently, the very low flux noise of 0.61 µΦ0/ Hz0.5 corresponding to the energy sensitivity ε of 8.6h at the white noise level was obtained by using a conventional flux-locked loop configuration. The low-frequency noise was also very low, 2.7 µΦ0/ Hz0.5 corresponding to ε= 170 h at 1 Hz. We could obtain very low flux noise for the SQUID which had the practical inductance using only a conventional readout circuit.

Japanese Journal of Applied Physics•May 1, 1994•5 citations

Nano-superconducting quantum interference devices with suspended junctions

Dibyendu Hazra, John R. Kirtley, K. Hasselbach

Nano-Superconducting Quantum Interference Devices (nano-SQUIDs) are usually fabricated from a single layer of either Nb or Al. We describe here a simple method for fabricating suspended nano-bridges in Nb/Al thin-film bilayers. We use these suspended bridges, which act as Josephson weak links, to fabricate nano-SQUIDs which show critical current oscillations at temperatures up to 1.5 K and magnetic flux densities up to over 20 mT. These nano-SQUIDs exhibit flux modulation depths intermediate between all-Al and all-Nb devices, with some of the desirable characteristics of both. The suspended geometry is attractive for magnetic single nanoparticle measurements.

Applied Physics Letters•Apr 14, 2014•25 citations

Geometric Dependence of Washer Inductance for NbN DC SQUIDs

Qiyu Zhang, Huiwu Wang, Guanqun Li +4 more

Planar niobium nitride (NbN) dc superconducting quantum interference devices (SQUIDs) magnetometers were developed based on high-quality epitaxial NbN/AlN/NbN Josephson junctions for SQUID applications at higher operating temperatures. To improve the design of NbN dc SQUIDs, we measured the SQUID washer's inductance, which is a key SQUID parameter. A set of NbN dc SQUIDs with washers with different dimensions were implemented. The washer inductances were obtained from the periodic flux variation in the SQUIDs when a control current was injected directly into the SQUID washers; the results agree well with the ones calculated with a numerical simulation in InductEX software. We obtained an empirical expression to estimate the NbN SQUID inductance with washers with different geometric structures. Our results will be useful for designing NbN dc SQUID magnetometers in future.

IEEE Transactions on Applied Superconductivity•Apr 18, 2018•1 citation

Abstract Superconducting quantum interference devices (SQUIDs) with 3D nano-bridge junctions can be miniaturized into nano-SQUIDs that are able to sense a few spins in a large magnetic field. Among all device parameters, the inductance is key to the performance of SQUIDs with 3D nano-bridge junctions. Here, we measured the critical-current magnetic flux modulation curves of 12 devices with three design types using a current strip-line directly coupled to the SQUID loop. A best flux modulation depth of 71% was achieved for our 3D Nb SQUID. From the modulation curves, we extracted the inductance values of the current stripe-line in each design and compared them with the corresponding simulation results of InductEX. In this way, London penetration depths of 110 and 420 nm were determined for our Nb (niobium) and NbN (niobium nitride) films, respectively. Furthermore, we showed that inductances of 11 and 119 pH for Nb and NbN 3D nano-bridge junctions, respectively, dominated the total inductance of our SQUID loops which are 23 pH for Nb and 255 pH for NbN. A screening parameter being equal to one suggests optimal critical currents of 89.6 and 8.1 μ A for Nb and NbN SQUIDs, respectively. Additionally, intrinsic flux noise of 110 ± 40 n Φ 0 /(Hz) 1/2 is calculated for the Nb SQUIDs with 3D nano-bridge junctions by Langevin simulation.

A superconducting quantum interference device (SQUID) miniaturized into the nanoscale is promising in the inductive detection of a single electron spin. A nano-SQUID with a strong spin coupling coefficient, a low flux noise, and a wide working magnetic field range is highly desired in a single spin resonance measurement. Nano-SQUIDs with Dayem bridge junctions excel in a high working field range and in the direct coupling from spins to the bridge. However, the common planar structure of nano-SQUIDs is known for problems such as a shallow flux modulation depth and a troublesome hysteresis in current–voltage curves. Here, we developed a fabrication process for creating three-dimensional (3-D) niobium (Nb) nano-SQUIDs with nanobridge junctions that can be tuned independently. Characterization of the device shows up to 45.9% modulation depth with a reversible current–voltage curve. Owning to the large modulation depth, the measured flux noise is as low as 0.34 μΦ 0 /Hz 1/2 . The working field range of the SQUID is greater than 0.5 T parallel to the SQUID plane. We believe that 3-D Nb nano-SQUIDs provide a promising step toward effective single-spin inductive detection.

Reduction of the size of the superconducting quantum interference device (SQUID) ring structure improves its sensitivity to magnetic moments. Nanobridge junctions are advantageous for SQUID miniaturization. However, many planar SQUIDs with nanobridge junctions have shallow flux modulation depths because of their nonideal Josephson current-phase relationships. Here, we fabricated a three-dimensional niobium nitride (NbN) miniaturized SQUID in which the nanobridge junction structures are much thinner than the superconducting ring. We grew a thick superconducting NbN film on a silicon wafer and embedded an insulating slit in the middle of the film. By setting two thin nanobridge junctions across this insulating slit, we were able to manufacture NbN miniaturized SQUIDs that, in principle, can become nano-SQUIDs. The flux modulation depths of these devices reached 36% at 4.2 K. In addition, the fabricated devices show reversible current-voltage characteristics in the absence of any shunting resistance.

In recent years, rapid single flux quantum (RSFQ) circuits, which are promising for the development of high-speed digital electronics, have attracted widespread interest. Niobium nitride (NbN) films have also attracted significant attention for high-frequency applications in superconducting electronics because of their superior material parameters, including their high critical temperature Tc and large gap voltage Vg. To enable the development of all-NbN SFQ circuits, we have developed a fabrication process based on NbN junctions and inductors made of NbN strip lines. It is important to evaluate the inductance because it can affect the performance of an RSFQ circuit and is essential for the RSFQ design. We measured the inductance properties of both epitaxial and polycrystalline NbN strip lines using a superconducting quantum interference device modulation technique at 4.2 K and obtained the width dependence on the inductance of the NbN films. The penetration depth was then calculated from these measurements. The NbN inductance values were calculated numerically with respect to the penetration depth and were then compared with the measured values from the experiments. It was demonstrated that the differences between these values were within 5%. The results reported here will be useful for the design and fabrication of all-NbN RSFQ circuits.

We have fabricated superconducting quantum interference devices (SQUIDs) with an inductance of 140 pH by using sub- µm Nb/Al–AlO x –Al/Nb edge junctions. The small capacitance of the junction resulted in the very large voltage swing of 210 µV and gradient dV/ dΦ of 940 µV/Φ0. Consequently, the very low flux noise of 0.61 µΦ0/ Hz0.5 corresponding to the energy sensitivity ε of 8.6h at the white noise level was obtained by using a conventional flux-locked loop configuration. The low-frequency noise was also very low, 2.7 µΦ0/ Hz0.5 corresponding to ε= 170 h at 1 Hz. We could obtain very low flux noise for the SQUID which had the practical inductance using only a conventional readout circuit.

Nano-Superconducting Quantum Interference Devices (nano-SQUIDs) are usually fabricated from a single layer of either Nb or Al. We describe here a simple method for fabricating suspended nano-bridges in Nb/Al thin-film bilayers. We use these suspended bridges, which act as Josephson weak links, to fabricate nano-SQUIDs which show critical current oscillations at temperatures up to 1.5 K and magnetic flux densities up to over 20 mT. These nano-SQUIDs exhibit flux modulation depths intermediate between all-Al and all-Nb devices, with some of the desirable characteristics of both. The suspended geometry is attractive for magnetic single nanoparticle measurements.

Planar niobium nitride (NbN) dc superconducting quantum interference devices (SQUIDs) magnetometers were developed based on high-quality epitaxial NbN/AlN/NbN Josephson junctions for SQUID applications at higher operating temperatures. To improve the design of NbN dc SQUIDs, we measured the SQUID washer's inductance, which is a key SQUID parameter. A set of NbN dc SQUIDs with washers with different dimensions were implemented. The washer inductances were obtained from the periodic flux variation in the SQUIDs when a control current was injected directly into the SQUID washers; the results agree well with the ones calculated with a numerical simulation in InductEX software. We obtained an empirical expression to estimate the NbN SQUID inductance with washers with different geometric structures. Our results will be useful for designing NbN dc SQUID magnetometers in future.