Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Journal of the Optical Society of America B

Optical communication frequency standard using a fiber laser to excite cold rubidium two-photon transition

Jianxiao Leng, Hao Jun Xu, Haoyuan Lu, Yaoyuan Fan, Jianye Zhao

Published Apr 11, 2019• 5 citations
Publisher

Abstract

We propose to utilize an Er-doped fiber laser locked to a cooled Rb two-photon transition (TPT) resonance as a frequency standard for fiber-based optical communication. We show experimentally that a continuous wave laser beam can enhance the strength of cooled Rb TPT as much as 2.5 times. The cooled Rb TPT resonance excited by the fiber frequency combs has a measured linewidth of about 900 kHz. After locking the repetition rate of the fiber laser to the cooled Rb TPT resonance, the stability reaches 1.5×10−13 with 100 s averaging time. The results demonstrate that the proposed method in this paper is promising to provide the radio frequency standard for fiber-based optical communication.

DOI
10.1364/josab.36.001183

Related papers

A Cold-Atom Optical Frequency Standard for Optical Fiber Communication by Using an Erbium-Fiber-Based Frequency Comb

Haoyuan Lu, Jianxiao Leng, Ping Guo +3 more

We demonstrate an approach of cold-atom frequency standard based on the two-photon transition (TPT) in rubidium (Rb), using an Erbium-fiber-based Frequency Comb. By introducing the technique of laser cooling and atoms trapping, our scheme can eliminate most of Doppler-broadening background. The fractional stability of the frequency standard can reach 6×10-12 and 4.5×10-13 at 1 s and 1000 s. This system has many applications, particularly for optical fiber communication.

Joint Conference of the European Frequency and Time Forum and IEEE International Frequency Control Symposium (EFTF/IFCS)•May 1, 2018•0 citations

The Optimization of Cold Rubidium Atom Two-Photon Transition Excitation with an Erbium-Fiber Optical Frequency Comb

Haoyuan Lu, Jianxiao Leng, Jianye Zhao

We demonstrated the observation of cold rubidium atom two-photon transition excitation by a fiber optical frequency comb. In addition to this, we optimized the repetition rate of optical frequency comb to enhance two-photon intensity by controlling cavity length and pump source of optical comb. This technique can fine tune repetition rate to corresponding stepwise two-photon transition resonance frequency and improve the transition intensity by three times. This method is useful in Doppler laser cooling and detection of macromolecules.

Applied Sciences•Mar 5, 2019•1 citation

Optical frequency standard for optical fiber communication based on the Rb 5s → 5d two-photon transition

Miao Zhu, Roger W. Standridge

We report an optical frequency standard based on the 5s --> 5d two-photon transition in Rb atoms. The frequency of a lambda = 778 nm diode laser was locked to the two-photon transition. Second-harmonic generation and an optical phase-locked loop were used to transfer the frequency stability to lambda = 1.556 mum for use in optical fiber communication applications.

Optics Letters•May 15, 1997•27 citations

Frequency Stabilization Technology of 1560 nm Fiber Laser Based on Rubidium Modulation Transfer Spectroscopy

Yang Bai, Jun Ruan, Dandan Liu +3 more

The modulation transfer spectroscopy (MTS) technique used to stabilize two different transition lines of rubidium, required for laser cooling of atoms, is investigated. The laser source is based on a 1560 nm semiconductor laser diode that is amplified by an erbium doped fiber amplifier (EDFA). The laser output is frequency doubled with a fiber coupled periodically poled Lithium Niobate (PPLN) crystal to 780 nm. To address the weak spectral features of repumping laser, a theoretical study is conducted followed by experimental verification. The 87Rb D2 line F = 1 → F' = 0 transition temperature-enhanced MTS signal is observed, which provides a choice to stabilize the repumping laser frquency on the F = 1 → F ' = 2 transition using frequency shifting with acousto-optic modulators (AOMs). Compared with the orignal MTS signal, this method is shown to be more stable and accurate for laser frequency locking. Laer frequency locking is realized by controlling the driving current of the seed laser using digital PID feedback. After locking, the laser linewidth is 35.36 kHz.

IEEE photonics journal•May 20, 2024•5 citations

A stable frequency comb directly referenced to rubidium electromagnetically induced transparency and two-photon transitions

Dong Hou, Jiutao Wu, Shuangyou Zhang +3 more

We demonstrate an approach to create a stable erbium-fiber-based frequency comb at communication band by directly locking the combs to two rubidium atomic transitions resonances (electromagnetically induced transparency absorption and two-photon absorption), respectively. This approach directly transfers the precision and stability of the atomic transitions to the comb. With its distinguishing feature of compactness by removing the conventional octave-spanning spectrum and f-to-2f beating facilities and the ability to directly control the comb's frequency at the atomic transition frequency, this stable optical comb can be widely used in optical communication, frequency standard, and optical spectroscopy and microscopy.

Applied Physics Letters•Mar 17, 2014•17 citations

Observation of Rb two-photon absorption directly excited by an erbium-fiber-laser-based optical frequency comb via spectral control

Jiutao Wu, Dong Hou, Zhengyu Qin +2 more

We present the observation of the Rb two-photon spectrum directly excited by an Er:fiber laser comb in a hot atomic vapor system. The influences of the atomic velocity distribution on direct and sequential two-photon transitions are discussed respectively and a combination of corresponding spectral control techniques is developed to eliminate the Doppler broadening background. A direct frequency comb spectroscopy is obtained with high-resolution two-photon transition lines. These techniques would benefit spectroscopy measurement in hot atomic vapor systems, and pave the way for establishing a high-stability optical frequency comb in 1.5 $\ensuremath{\mu}$m optical communication bands based on the Rb two-photon transitions.

arXiv:1306.2205•Physical Review A•Apr 14, 2014•10 citations
We propose to utilize an Er-doped fiber laser locked to a cooled Rb two-photon transition (TPT) resonance as a frequency standard for fiber-based optical communication. We show experimentally that a continuous wave laser beam can enhance the strength of cooled Rb TPT as much as 2.5 times. The cooled Rb TPT resonance excited by the fiber frequency combs has a measured linewidth of about 900 kHz. After locking the repetition rate of the fiber laser to the cooled Rb TPT resonance, the stability reaches 1.5×10−13 with 100 s averaging time. The results demonstrate that the proposed method in this paper is promising to provide the radio frequency standard for fiber-based optical communication.
We demonstrated the observation of cold rubidium atom two-photon transition excitation by a fiber optical frequency comb. In addition to this, we optimized the repetition rate of optical frequency comb to enhance two-photon intensity by controlling cavity length and pump source of optical comb. This technique can fine tune repetition rate to corresponding stepwise two-photon transition resonance frequency and improve the transition intensity by three times. This method is useful in Doppler laser cooling and detection of macromolecules.
The modulation transfer spectroscopy (MTS) technique used to stabilize two different transition lines of rubidium, required for laser cooling of atoms, is investigated. The laser source is based on a 1560 nm semiconductor laser diode that is amplified by an erbium doped fiber amplifier (EDFA). The laser output is frequency doubled with a fiber coupled periodically poled Lithium Niobate (PPLN) crystal to 780 nm. To address the weak spectral features of repumping laser, a theoretical study is conducted followed by experimental verification. The 87Rb D2 line F = 1 → F' = 0 transition temperature-enhanced MTS signal is observed, which provides a choice to stabilize the repumping laser frquency on the F = 1 → F ' = 2 transition using frequency shifting with acousto-optic modulators (AOMs). Compared with the orignal MTS signal, this method is shown to be more stable and accurate for laser frequency locking. Laer frequency locking is realized by controlling the driving current of the seed laser using digital PID feedback. After locking, the laser linewidth is 35.36 kHz.
We demonstrate an approach to create a stable erbium-fiber-based frequency comb at communication band by directly locking the combs to two rubidium atomic transitions resonances (electromagnetically induced transparency absorption and two-photon absorption), respectively. This approach directly transfers the precision and stability of the atomic transitions to the comb. With its distinguishing feature of compactness by removing the conventional octave-spanning spectrum and f-to-2f beating facilities and the ability to directly control the comb's frequency at the atomic transition frequency, this stable optical comb can be widely used in optical communication, frequency standard, and optical spectroscopy and microscopy.
We present the observation of the Rb two-photon spectrum directly excited by an Er:fiber laser comb in a hot atomic vapor system. The influences of the atomic velocity distribution on direct and sequential two-photon transitions are discussed respectively and a combination of corresponding spectral control techniques is developed to eliminate the Doppler broadening background. A direct frequency comb spectroscopy is obtained with high-resolution two-photon transition lines. These techniques would benefit spectroscopy measurement in hot atomic vapor systems, and pave the way for establishing a high-stability optical frequency comb in 1.5 $\ensuremath{\mu}$m optical communication bands based on the Rb two-photon transitions.