Fast and high efficiency single-photon detectors have important applications in the fields of life science and quantum information. We report, herein, a serially connected two superconducting nanowire avalanche photon detector (SC2-SNAP) fabricated on a dielectric mirror aiming to 630 nm wavelength. This detector shows system detection efficiency (SDE) of 84.8% at a dark count rate of 10 Hz and offers fast detection speed while maintaining a high SDE, where the counting rate reaches 53.9 MHz at an SDE of 60%. This fast and high efficiency single-photon detector may find applications in fluorescence correlation spectroscopy and quantum key distribution.
Fast and high efficiency single-photon detectors have important applications in the fields of life science and quantum information. We report, herein, a serially connected two superconducting nanowire avalanche photon detector (SC2-SNAP) fabricated on a dielectric mirror aiming to 630 nm wavelength. This detector shows system detection efficiency (SDE) of 84.8% at a dark count rate of 10 Hz and offers fast detection speed while maintaining a high SDE, where the counting rate reaches 53.9 MHz at an SDE of 60%. This fast and high efficiency single-photon detector may find applications in fluorescence correlation spectroscopy and quantum key distribution.
High Resolution Image Download MS PowerPoint Slide Efficiently distinguishing photon numbers is a crucial yet challenging technology for various quantum information and quantum metrology applications. While superconducting transition edge sensors offer good photon-number-resolving (PNR) capabilities, they are hampered by low detection speed, timing jitter, and complex cooling and readout requirements. In this work, we present a significant advancement toward achieving high-fidelity PNR single-photon detectors by combing high efficiency superconducting nanowire single-photon detector and spatial multiplexing technology. The unique twin-layer configuration of superconducting nanowire atop a dielectric mirror ensures the near-unity detection efficiency. The segmented design, where each section is shunted by a resistor, enables spatial multiplexing, establishing a mapping relationship between pulse amplitude and registered photons. The fabricated detector exhibits impressive performance metrics, including a single-photon system detection efficiency (SDE) of ∼98% at a dark count rate of 20 cps and photon-number resolution capability up to 32. Further characterization through detector tomography reveals high fidelities for two-, three-, and four-photon events, approximately 87%, 73%, and 40% respectively. Moreover, the detector operates at a high count rate of 41 MHz at 3 dB-SDE, with a low timing jitter of as low as 40 ps. With its near-unity efficiency, high photon-number resolution, low dark count rate, fast detection speed, and superior timing resolution, we expect significant interest in these detectors, promising substantial benefits for weak light detection and optical quantum information applications.
We develop single-photon detectors comprising single-mode fiber-coupled superconducting nanowires, with high system detection efficiencies at a wavelength of 940 nm. The detector comprises a 6.5-nm-thick, 110-nm-wide NbN nanowire meander fabricated onto a Si substrate with a distributed Bragg reflector for enhancing the optical absorptance. We demonstrate that, via the design of a low filling factor (1/3) and active area (Φ = 10 μm), the system reaches a detection efficiency of ∼60% with a dark count rate of 10 Hz, a recovery time <12 ns, and a timing jitter of ∼50 ps.
We report the development of the multimode fiber-coupled superconducting nanowire single-photon detector with high system detection efficiency at visible wavelength. The detector consists of a 10.5-nm-thick and 150-nm-wide NbN nanowire meander fabricated on a Si substrate with a multilayer dielectric mirror and a quarter wavelength cavity for obtaining high optical absorptance. The meander area was 35 µm in diameter and coupled with the GRIN-lensed multimode optical fiber with a core diameter of 50 µm. The system reached detection efficiency of 70% with dark count rate of 100 Hz at the wavelength of 635 nm, 3 dB roll-off response counting rate of 8.5 Mcps, and timing jitter of 76 ps.
We report a broadband superconducting nanowire single-photon detector for the near-infrared waveband. The optical absorptance in this band is enhanced by utilizing a reflective aluminum mirror and a SiO2layer as an optical cavity. A broadband system detection efficiency (SDE) over 50% from 950 to 1600 nm with a low dark count rate of 10 Hz is realized by coupling a HI 1060 FLEX single-mode fiber. The SDEs reaches 78.3%, 70.9%, and 57.7% at the wavelengths of 1064, 1310, and 1550 nm, respectively. A system timing resolution (jitter) of 83 ps at 1550 nm is obtained. The detector may be useful for broadband applications such as earth observation, environment monitoring, and biomedicine.
Abstract A series superconducting nanowire single-photon detector is a high performance nanowire array detector that has the potential to reach a high system detection efficiency (SQE), a high counting rate (CR) and photon number resolving functionality. Interconnected with a simplified readout, it shows promise for large scale expansion and has good prospects for future applications in single-photon imaging, quantum optics, quantum computing and deep-space communication. In this paper, we demonstrate a high SQE and CR series superconducting nanowire single-photon detector with an active area of 20 × 20 μ m 2 . The detector shows a maximum SQE of 68% at 1550 nm with a dark count rate of 200 Hz and a wide response wavelength from 1100–2000 nm. It also achieves a CR over 300 MHz at single photon power level and has the capability of resolving photon numbers by up to six photons.
Recent progress in the development of superconducting nanowire single photon detectors (SSPD or SNSPD) has delivered excellent performance, and has had a great impact on a range of research fields. Significant efforts are being made to further improve the technology, and a primary concern remains to resolve the trade-offs between detection efficiency (DE), timing jitter, and response speed. We present a stable and high-performance fiber-coupled niobium titanium nitride superconducting nanowire avalanche photon detector (SNAP) that resolves these trade-offs. Autocorrelation function measurement revealed an afterpulse-free operation in serially connected two SNAP (SC-2SNAP), even in the absence of a choke inductor, achieving a 7.65 times faster response speed than standard SSPDs. The SC-2SNAP device showed a system detection efficiency (SDE) of 81.0% with wide bias current margin, a dark count rate of 6.8 counts/s, and full width at half maximum timing jitter of 68 ps, operating in a practical Gifford-McMahon cryocooler system.