© 2026 Aqora Quantum S.A.S.

Terms Privacy Legal Notice

Characterisation of multi-pixel superconducting nanowire single photon detectors

Jeroen Swens

Published Jan 1, 2018• 0 citations

Abstract

Single-photon detection is extremely important for a number of different applications such as quantum cryptography, CMOS testing and even biomedical research. Most of the applications of single-photon detector require high efficiency combined with high time resolution, high count rates and low dark counts. Superconducting nanowire single-photon detectors has emerged provides this combination unlike any other available single-photon detectors. Some of the applications of superconducting nanowire single-photon detectors (SNSPD's) require larger area SNSPD's without affecting it's performance. For this purpose, multi-pixel SNSPD's would provide a solution. To this end, prototype 4- and 16-pixel detectors have been characterised in terms of a number of performance parameters such as critical current, count rate behaviour and timing jitter. Aside from this, simulations have been performed on detection statistics and relative illumination of the individual pixels of a multi-pixel SNSPD. Results show that for 4-pixel detectors, all desired aspects have been achieved, but not yet combined in one detector. The 16-pixel detectors showed excellent critical currents and count rate behaviour but, most likely due to the fact that they were prototype chips with little to no protection, had several not functioning pixels.

Related papers

Design for superconducting nanowire single-photon detectors for photon number resolution and spatial resolution

Ying Yang, Junquan Guo, Yongliang Xu +3 more

Superconducting nanowire single-photon detectors (SNSPDs) have abstracted widespread attention in the fields of quantum information and quantum photonics due to their high detection efficiency and low dark count rates (DCR). However, single-pixel SNSPDs exist the notable limitations in detection speed and photon number resolution (PNR) capabilities, which pose challenges for practical applications. In this study, we propose a design of a series four-pixel SNSPD that incorporates a SPICE circuit simulation model to achieve PNR and spatial resolution of the four photons in an ideal state, and then determine the optical cavity structure of the detector at the highest light absorption of up to 97% through optical simulation. This design provides a theoretical foundation for the subsequent fabrication of large-area SNSPD with PNR and spatial resolution, significantly improving the flexibility and adaptability of SNSPDs to meet diverse detection requirements. Furthermore, our work also lays a research foundation for multi-photon detection in quantum communication and quantum computing.

Sixth Symposium on Novel Optoelectronic Detection Technology and Applications•Feb 17, 2025•0 citations

Superconducting nanowire single-photon detectors: A perspective on evolution, state-of-the-art, future developments, and applications

Iman Esmaeil Zadeh, Jin Chang, Johannes W. N. Los +5 more

Two decades after their demonstration, superconducting nanowire single-photon detectors (SNSPDs) have become indispensable tools for quantum photonics as well as for many other photon-starved applications. This invention has not only led to a burgeoning academic field with a wide range of applications but also triggered industrial efforts. Current state-of-the-art SNSPDs combine near-unity detection efficiency over a wide spectral range, low dark counts, short dead times, and picosecond time resolution. The present perspective discusses important milestones and progress of SNSPDs research, emerging applications, and future challenges and gives an outlook on technological developments required to bring SNSPDs to the next level: a photon-counting, fast time-tagging imaging, and multi-pixel technology that is also compatible with quantum photonic integrated circuits.

Applied Physics Letters•May 10, 2021•338 citations

Superconducting nanowire single-photon detectors for communication and fundamental physics applications

Jamie Luskin, Emma E. Wollman, Ekkehart Schmidt +9 more

Superconducting Nanowire Single Photon Detectors (SNSPDs) excel at a wide variety of performance criteria for single photon counting. They combine unprecedented high detection efficiency, high timing resolution, high count rates, low intrinsic dark count rates, and are sensitive to ultraviolet through mid-infrared single-photons. At JPL, we are working on several projects to push the performance limits of SNSPDs to achieve higher maximum count rates, larger active areas, higher timing resolution, and a wider spectral range. Our recent advances enable new applications for dark matter detection, imaging, and space-to-ground communication and provide insight into the fundamental physics of single-photon detection in superconducting nanowires.

Advanced Photon Counting Techniques•Apr 30, 2021•0 citations

Cryogenic Signal Processing Using Single-flux-quantum Circuit for High Performance Multi-pixel Superconducting Nanowire Single-photon Detectors

Hirotaka Terai, Shigehito Miki, Taro Yamashita +2 more

Superconducting nanowire single-photon detectors (SSPDs) with a system detection efficiency (SDE) of over 80% are now commercially available and being used in compact Gifford-McMahon refrigerators. However, not only high SDE, but also total performance including a low dark count rate, high maximum count rate and/or low timing jitter are important for many applications. A multi-pixel SSPD combined with signal processing using a single-flux-quantum (SFQ) circuit is a very promising approach to improve the system performance of SSPDs. In this review, we introduce our recent activities on cryogenic signal processing using SFQ circuits to realize high-performance multi-pixel SSPDs.

TEION KOGAKU (Journal of Cryogenics and Superconductivity Society of Japan)•Jan 1, 2017•0 citations

A 16-Pixel Interleaved Superconducting Nanowire Single-Photon Detector Array With A Maximum Count Rate Exceeding 1.5 GHz

Weijun Zhang, Jia Huang, Chengjun Zhang +6 more

Increasing the count rate (CR) is one of the key issues in the development of superconducting nanowire single-photon detectors (SNSPDs) for different applications. This study aims to design, fabricate, and analyze a 16-pixel interleaved nanowire SNSPD array, which exhibits a system detection efficiency (SDE) of 72% and a dark CR of 100 Hz at a low-photon-flux limit and a wavelength of 1550 nm. By exploiting the increased pixel number and reduced dead time (10photons/s. Moreover, the SNSPD achieved a photon number resolution of up to 16 photons.

IEEE Transactions on Applied Superconductivity•Feb 9, 2019•95 citations

Superconducting nanowire single-photon detector array with pixel-level photon-number resolution

Chenrui Wang, Chaomeng Ding, Jingxue Chen +6 more

We report a 16-pixel (4×4) superconducting nanowire single-photon detector (SNSPD) array featuring pixel-level photon-number-resolving capability. This multidimensional sensing is enabled by integrating a compact four-element series nanowire architecture into each spatial pixel, allowing direct discrimination of one to four photons. Under single-mode fiber illumination, the device achieves a total system detection efficiency of 41.5%, given the array geometrical fill factor of 53%. Across all channels, the device exhibits reliable multiphoton discrimination, maintaining minimum readout fidelities of 96%, 89%, 73%, and 77% for one- to four-photon states, respectively. Furthermore, independent channel evaluations reveal low timing jitter and negligible inter-channel crosstalk (<0.1 % ). By implementing differentiating pulse shaping for high-flux operation, a maximum single-channel −3 dB count rate of 984 MHz is achieved, establishing an aggregated array bandwidth potential of 8.9 GHz. This sensing architecture may provide a viable pathway toward high-flux single-photon imaging, offering potential applications in quantum optics and light detection and ranging (LiDAR) systems.

Photonics Research•Aug 28, 2026•0 citations

Single-photon detection is extremely important for a number of different applications such as quantum cryptography, CMOS testing and even biomedical research. Most of the applications of single-photon detector require high efficiency combined with high time resolution, high count rates and low dark counts. Superconducting nanowire single-photon detectors has emerged provides this combination unlike any other available single-photon detectors. Some of the applications of superconducting nanowire single-photon detectors (SNSPD's) require larger area SNSPD's without affecting it's performance. For this purpose, multi-pixel SNSPD's would provide a solution. To this end, prototype 4- and 16-pixel detectors have been characterised in terms of a number of performance parameters such as critical current, count rate behaviour and timing jitter. Aside from this, simulations have been performed on detection statistics and relative illumination of the individual pixels of a multi-pixel SNSPD. Results show that for 4-pixel detectors, all desired aspects have been achieved, but not yet combined in one detector. The 16-pixel detectors showed excellent critical currents and count rate behaviour but, most likely due to the fact that they were prototype chips with little to no protection, had several not functioning pixels.

Superconducting nanowire single-photon detectors (SNSPDs) have abstracted widespread attention in the fields of quantum information and quantum photonics due to their high detection efficiency and low dark count rates (DCR). However, single-pixel SNSPDs exist the notable limitations in detection speed and photon number resolution (PNR) capabilities, which pose challenges for practical applications. In this study, we propose a design of a series four-pixel SNSPD that incorporates a SPICE circuit simulation model to achieve PNR and spatial resolution of the four photons in an ideal state, and then determine the optical cavity structure of the detector at the highest light absorption of up to 97% through optical simulation. This design provides a theoretical foundation for the subsequent fabrication of large-area SNSPD with PNR and spatial resolution, significantly improving the flexibility and adaptability of SNSPDs to meet diverse detection requirements. Furthermore, our work also lays a research foundation for multi-photon detection in quantum communication and quantum computing.

Two decades after their demonstration, superconducting nanowire single-photon detectors (SNSPDs) have become indispensable tools for quantum photonics as well as for many other photon-starved applications. This invention has not only led to a burgeoning academic field with a wide range of applications but also triggered industrial efforts. Current state-of-the-art SNSPDs combine near-unity detection efficiency over a wide spectral range, low dark counts, short dead times, and picosecond time resolution. The present perspective discusses important milestones and progress of SNSPDs research, emerging applications, and future challenges and gives an outlook on technological developments required to bring SNSPDs to the next level: a photon-counting, fast time-tagging imaging, and multi-pixel technology that is also compatible with quantum photonic integrated circuits.

Superconducting Nanowire Single Photon Detectors (SNSPDs) excel at a wide variety of performance criteria for single photon counting. They combine unprecedented high detection efficiency, high timing resolution, high count rates, low intrinsic dark count rates, and are sensitive to ultraviolet through mid-infrared single-photons. At JPL, we are working on several projects to push the performance limits of SNSPDs to achieve higher maximum count rates, larger active areas, higher timing resolution, and a wider spectral range. Our recent advances enable new applications for dark matter detection, imaging, and space-to-ground communication and provide insight into the fundamental physics of single-photon detection in superconducting nanowires.

Superconducting nanowire single-photon detectors (SSPDs) with a system detection efficiency (SDE) of over 80% are now commercially available and being used in compact Gifford-McMahon refrigerators. However, not only high SDE, but also total performance including a low dark count rate, high maximum count rate and/or low timing jitter are important for many applications. A multi-pixel SSPD combined with signal processing using a single-flux-quantum (SFQ) circuit is a very promising approach to improve the system performance of SSPDs. In this review, we introduce our recent activities on cryogenic signal processing using SFQ circuits to realize high-performance multi-pixel SSPDs.

Increasing the count rate (CR) is one of the key issues in the development of superconducting nanowire single-photon detectors (SNSPDs) for different applications. This study aims to design, fabricate, and analyze a 16-pixel interleaved nanowire SNSPD array, which exhibits a system detection efficiency (SDE) of 72% and a dark CR of 100 Hz at a low-photon-flux limit and a wavelength of 1550 nm. By exploiting the increased pixel number and reduced dead time (10photons/s. Moreover, the SNSPD achieved a photon number resolution of up to 16 photons.

We report a 16-pixel (4×4) superconducting nanowire single-photon detector (SNSPD) array featuring pixel-level photon-number-resolving capability. This multidimensional sensing is enabled by integrating a compact four-element series nanowire architecture into each spatial pixel, allowing direct discrimination of one to four photons. Under single-mode fiber illumination, the device achieves a total system detection efficiency of 41.5%, given the array geometrical fill factor of 53%. Across all channels, the device exhibits reliable multiphoton discrimination, maintaining minimum readout fidelities of 96%, 89%, 73%, and 77% for one- to four-photon states, respectively. Furthermore, independent channel evaluations reveal low timing jitter and negligible inter-channel crosstalk (<0.1 % ). By implementing differentiating pulse shaping for high-flux operation, a maximum single-channel −3 dB count rate of 984 MHz is achieved, establishing an aggregated array bandwidth potential of 8.9 GHz. This sensing architecture may provide a viable pathway toward high-flux single-photon imaging, offering potential applications in quantum optics and light detection and ranging (LiDAR) systems.