Superconducting nanowire single-photon detectors (SNSPDs) have abstracted widespread attention in the fields of quantum information and quantum photonics due to their high detection efficiency and low dark count rates (DCR). However, single-pixel SNSPDs exist the notable limitations in detection speed and photon number resolution (PNR) capabilities, which pose challenges for practical applications. In this study, we propose a design of a series four-pixel SNSPD that incorporates a SPICE circuit simulation model to achieve PNR and spatial resolution of the four photons in an ideal state, and then determine the optical cavity structure of the detector at the highest light absorption of up to 97% through optical simulation. This design provides a theoretical foundation for the subsequent fabrication of large-area SNSPD with PNR and spatial resolution, significantly improving the flexibility and adaptability of SNSPDs to meet diverse detection requirements. Furthermore, our work also lays a research foundation for multi-photon detection in quantum communication and quantum computing.
Superconducting nanowire single-photon detectors (SNSPDs) have abstracted widespread attention in the fields of quantum information and quantum photonics due to their high detection efficiency and low dark count rates (DCR). However, single-pixel SNSPDs exist the notable limitations in detection speed and photon number resolution (PNR) capabilities, which pose challenges for practical applications. In this study, we propose a design of a series four-pixel SNSPD that incorporates a SPICE circuit simulation model to achieve PNR and spatial resolution of the four photons in an ideal state, and then determine the optical cavity structure of the detector at the highest light absorption of up to 97% through optical simulation. This design provides a theoretical foundation for the subsequent fabrication of large-area SNSPD with PNR and spatial resolution, significantly improving the flexibility and adaptability of SNSPDs to meet diverse detection requirements. Furthermore, our work also lays a research foundation for multi-photon detection in quantum communication and quantum computing.
Superconducting nanowire single-photon detectors (SNSPDs) are typical switching devices capable of detecting single photons with almost 100% detection efficiency. However, they cannot determine the exact number of incident photons during a detection event. Multi-pixel SNSPDs employing multiple read-out channels can provide photon number resolvability (PNR), but they require increased cooling power and costly multi-channel electronic systems. In this work, a single-flux quantum (SFQ) circuit is employed, and PNR based on multi-pixel SNSPDs is successfully demonstrated. A multi-input magnetically coupled DC/SFQ converter (MMD2Q) circuit with a mutual inductance M is used to combine and record signals from a multi-pixel SNSPD device. The designed circuit is capable of discriminating the amplitude of the combined signals in accuracy of Φ 0/M with Φ 0 being a single magnetic flux quantum. By employing the MMD2Q circuit, the discrimination of up to 40 photons can be simulated. A 4-parallel-input MMD2Q circuit is fabricated, and a PNR of 3 is successfully demonstrated for an SNSPD array with one channel reserved for the functional verification. The results confirm that an MMD2Q circuit is an effective tool for implementing PNR with multi-pixel SNSPDs.
We report a 16-pixel (4×4) superconducting nanowire single-photon detector (SNSPD) array featuring pixel-level photon-number-resolving capability. This multidimensional sensing is enabled by integrating a compact four-element series nanowire architecture into each spatial pixel, allowing direct discrimination of one to four photons. Under single-mode fiber illumination, the device achieves a total system detection efficiency of 41.5%, given the array geometrical fill factor of 53%. Across all channels, the device exhibits reliable multiphoton discrimination, maintaining minimum readout fidelities of 96%, 89%, 73%, and 77% for one- to four-photon states, respectively. Furthermore, independent channel evaluations reveal low timing jitter and negligible inter-channel crosstalk (<0.1 % ). By implementing differentiating pulse shaping for high-flux operation, a maximum single-channel −3 dB count rate of 984 MHz is achieved, establishing an aggregated array bandwidth potential of 8.9 GHz. This sensing architecture may provide a viable pathway toward high-flux single-photon imaging, offering potential applications in quantum optics and light detection and ranging (LiDAR) systems.
Superconducting nanowire single-photon detectors (SNSPDs) are renowned for their high detection efficiency, low dark count rate, and fast timing resolution, which have emerged as an essential device in quantum technologies, including quantum computing and communication, which also significantly benefits classical applications such as deep-space communication, neuromorphic computing, and light detection and ranging (LiDAR). However, designing and customizing SNSPD into versatile functionalities to satisfy these intensive requirements poses significant challenges, including thin-film deposition, nanofabrication, electrical integration, and light delivery strategies. While prior work has typically optimized individual steps – such as fabrication or characterization – there is a lack of reported systematic, integrated frameworks that span all stages from device design to performance benchmarking. This gap hinders broader adoption of the technology across scientific and industrial communities and limits the rigorous exploration of advanced detection concepts. This thesis aims to establish an end-to-end workflow for the customizable fabrication and comprehensive characterization of superconducting nanowire single-photon detectors, and to demonstrate that such a platform is essential for the investigation of diverse single-photon detection architectures. It begins with the optimization of NbTiN thin-film deposition utilizing an ultrahigh vacuum sputtering system. By systematically identifying and optimizing key deposition parameters, we achieve NbTiN films with targeted superconducting properties along with high uniformity and reproducibility. This fast and reliable workflow establishes a solid foundation for detector fabrication and provides instructions for flexible control over film properties. Furthermore, effective nanofabrication protocols for the high-quality SNSPDs were elaborated, along with the specialized cryogenic packaging techniques for reliable electrical and optical integration. The achieved devices demonstrated performance metrics comparable to commercial systems. The implementation of this full fabrication—characterization cycle also enabled flexible exploration of advanced detector architectures. For example, we investigated superconducting microbridge single-photon detectors (SMSPDs) as a complementary platform, demonstrating a fivefold enhancement in signal-to-noise ratio and a tenfold reduction in recovery time relative to conventional SNSPDs. These results provide quantitative insight into detector design trade-offs. Within this framework, photon-number-resolving (PNR) detection using SNSPDs was further investigated as an essential function for advanced quantum and classical applications. We presented innovative detector architectures—interleaved multi-pixel arrays and multilayer coherent absorption structures—to overcome limitations inherent in conventional multiplexing methods, such as nonuniform detection, temporal degradation, and crosstalk. An interleaved multi-pixel SNSPD array with up to four-photon resolution was achieved with uniform detection, as well as a multilayer architecture based on coherent absorption with uniform and near-unity absorption efficiency. Importantly, a theoretical comparison between these two architectures was conducted to evaluate their absorption efficiency and PNR performance, offering insights into structural optimization and device scalability for advanced PNR detectors. Overall, this thesis establishes a fully in-house SNSPD fabrication and characterization capability, providing a robust foundation for the development, customization, and evaluation of high-performance superconducting single-photon detectors. This platform enables reproducible design optimization, quantitative performance benchmarking, and systematic exploration of detector architectures. By integrating fabrication, characterization, and architectural innovation within a consistent workflow, it facilitates both fundamental investigation and application-driven advancement of single-photon detection technologies in our laboratory and the broader research community in Singapore.
Photon-number-resolving (PNR) single-photon detectors are an enabling technology in many areas, such as photonic quantum computing, nonclassical light-source characterization, and quantum imaging.Here, we demonstrate high-efficiency PNR detectors using a parallel superconducting nanowire singlephoton-detector (P-SNSPD) architecture that does not suffer from crosstalk between the pixels and that is free of latching.The behavior of the detector is modeled and used to predict the possible outcomes given a certain number of incoming photons.We apply our model to a four-pixel P-SNSPD with a system detection efficiency of 92.5%.We also demonstrate how this detector allows reconstructing the photonnumber statistics of a coherent source of light, which paves the way towards the characterization of the photon statistics of other types of light source using a single detector.
Superconducting nanowire single-photon detectors (SNSPDs) have enabled the realization of several quantum optics technologies thanks to their high system detection efficiency (SDE), low dark counts, and fast recovery time. However, the widespread use of linear optical quantum computing, quasi-deterministic single-photon sources, and quantum repeaters requires even faster detectors that can also distinguish between different photon-number states. Here, we present an SNSPD array composed of 14 independent pixels, achieving an SDE of 90% in the telecommunications band. By reading each pixel of the array independently, we show detection of telecommunication photons at 1.5 GHz with 45% absolute SDE. We exploit the dynamic photon-number resolution of the array to demonstrate accurate state reconstruction for a wide range of light inputs, including operation with long-duration light pulses, as obtained with some cavity-based sources. We show two-photon and three-photon fidelities of 74% and 57%, respectively, which represent state-of-the-art results for fiber-coupled SNSPDs.
High Resolution Image Download MS PowerPoint Slide Efficiently distinguishing photon numbers is a crucial yet challenging technology for various quantum information and quantum metrology applications. While superconducting transition edge sensors offer good photon-number-resolving (PNR) capabilities, they are hampered by low detection speed, timing jitter, and complex cooling and readout requirements. In this work, we present a significant advancement toward achieving high-fidelity PNR single-photon detectors by combing high efficiency superconducting nanowire single-photon detector and spatial multiplexing technology. The unique twin-layer configuration of superconducting nanowire atop a dielectric mirror ensures the near-unity detection efficiency. The segmented design, where each section is shunted by a resistor, enables spatial multiplexing, establishing a mapping relationship between pulse amplitude and registered photons. The fabricated detector exhibits impressive performance metrics, including a single-photon system detection efficiency (SDE) of ∼98% at a dark count rate of 20 cps and photon-number resolution capability up to 32. Further characterization through detector tomography reveals high fidelities for two-, three-, and four-photon events, approximately 87%, 73%, and 40% respectively. Moreover, the detector operates at a high count rate of 41 MHz at 3 dB-SDE, with a low timing jitter of as low as 40 ps. With its near-unity efficiency, high photon-number resolution, low dark count rate, fast detection speed, and superior timing resolution, we expect significant interest in these detectors, promising substantial benefits for weak light detection and optical quantum information applications.