Ultracold atomic gases can be utilised as extremely sensitive probes of their surrounding environment. In particular, samples of ultracold atoms confined using chip-based microtraps are an ideal tool for mapping electric and magnetic field landscapes. Over the course of this thesis, a new experiment capable of performing surface microscopy using magnetically trapped clouds of cold rubidium-87 atoms has been built. The focus of the work is on the design and construction of the experimental system, which must incorporate many different aspects for manipulating thermal atomic gases, with a view to positioning them at sub-micron distances from special surfaces. This reduced atom-surface separation is necessary for implementing a high resolution, high sensitivity magnetic field sensor with cold atoms. Although current microfabrication techniques easily enable trapping at distances on the order of micrometres, several distance-dependent surface effects - such as the Casimir-Polder force, Johnson-Nyquist noise, and stray potentials - eventually impede magnetic trapping at the sub-micron level. These surface effects can greatly modify the confining potentials, which reduces the trap depth and consequently leads to an additional loss rate of atoms from the trap. We have explored the possibility of using special surfaces such as nano-membranes of silicon nitride and graphene, which have reduced atom- surface interactions, to enable trapping distances at the sub-micron level. A multilayer printed circuit board chip has been designed to form an initial magnetic trap and then transport the cloud of atoms to a desired location over the samples. This chip, along with various samples, is mounted on a custom-made electrical feedthrough designed to make connections to all conductor that are inside the vacuum chamber. The initial cloud of cold atoms can then be prepared in the central region of the chip and delivered to the location of the samples on either side. The experimental system is able to routinely capture over 10^8 rubidium-87 atoms at a temperature of 80 micro-Kelvin in a magneto-optical trap using a novel scheme of five laser beams. A method is demonstrated for enhancing the atom number in the magneto-optical traps by a factor of two by using laser beams with two slightly different frequencies. Atoms from the magneto-optical trap are then transferred to a purely magnetic trap formed by the wires on the printed circuit board chip. Time-dependent currents in the chip wires then create a dynamic potential, which is shown to successfully transport the atomic sample over a distance of 12 millimetre with minimal atom loss. This thesis describes the development of the apparatus in detail, along with careful characterisation of the cold cloud at various stages of the experimental sequence. Initial results on the long distance atom transport are presented. Finally, the experimental results of the two frequency magneto-optical trap for atom number improvement are discussed.
Ultracold atomic gases can be utilised as extremely sensitive probes of their surrounding environment. In particular, samples of ultracold atoms confined using chip-based microtraps are an ideal tool for mapping electric and magnetic field landscapes. Over the course of this thesis, a new experiment capable of performing surface microscopy using magnetically trapped clouds of cold rubidium-87 atoms has been built. The focus of the work is on the design and construction of the experimental system, which must incorporate many different aspects for manipulating thermal atomic gases, with a view to positioning them at sub-micron distances from special surfaces. This reduced atom-surface separation is necessary for implementing a high resolution, high sensitivity magnetic field sensor with cold atoms. Although current microfabrication techniques easily enable trapping at distances on the order of micrometres, several distance-dependent surface effects - such as the Casimir-Polder force, Johnson-Nyquist noise, and stray potentials - eventually impede magnetic trapping at the sub-micron level. These surface effects can greatly modify the confining potentials, which reduces the trap depth and consequently leads to an additional loss rate of atoms from the trap. We have explored the possibility of using special surfaces such as nano-membranes of silicon nitride and graphene, which have reduced atom- surface interactions, to enable trapping distances at the sub-micron level. A multilayer printed circuit board chip has been designed to form an initial magnetic trap and then transport the cloud of atoms to a desired location over the samples. This chip, along with various samples, is mounted on a custom-made electrical feedthrough designed to make connections to all conductor that are inside the vacuum chamber. The initial cloud of cold atoms can then be prepared in the central region of the chip and delivered to the location of the samples on either side. The experimental system is able to routinely capture over 10^8 rubidium-87 atoms at a temperature of 80 micro-Kelvin in a magneto-optical trap using a novel scheme of five laser beams. A method is demonstrated for enhancing the atom number in the magneto-optical traps by a factor of two by using laser beams with two slightly different frequencies. Atoms from the magneto-optical trap are then transferred to a purely magnetic trap formed by the wires on the printed circuit board chip. Time-dependent currents in the chip wires then create a dynamic potential, which is shown to successfully transport the atomic sample over a distance of 12 millimetre with minimal atom loss. This thesis describes the development of the apparatus in detail, along with careful characterisation of the cold cloud at various stages of the experimental sequence. Initial results on the long distance atom transport are presented. Finally, the experimental results of the two frequency magneto-optical trap for atom number improvement are discussed.
Atom chips are an excellent tool for studying ultracold degenerate quantum gases, due to the high degree of controllability afforded by the precise potentials generated from the current-carrying microfabricated wires on the chip surface. The geometries of the trapping potentials are inherently capable of realising extreme aspect ratios, and therefore creating model systems with effectively reduced dimensionality, particularly the theoretically-tractable one-dimensional Bose gas. In addition, the temporal tunability makes it possible to impart non-adiabatic changes on the trapping potentials, allowing experimental investigation of samples which have been brought out of equilibrium - a situation which is not fully theoretically understood. This thesis describes the implementation, development and characterisation of an experimental system for producing the first Bose-Einstein condensates of atomic rubidium 87 gas trapped on the surface of an atom chip in Nottingham. Such an apparatus is very complex and requires careful characterisation in order to run in a stable and reliable way. Details of the experimental setup are thoroughly outlined, including the vacuum system, lasers, electronics, computer control and timing, and the optical imaging system. A newly installed compact two-dimensional magneto-optical trap provides an loading rate of 5e7 atoms per second for loading a three-dimensional mirror-magneto-optical trap with 1.5e8 atoms, at a temperature of 300uK within 10s. The cloud is then sub-Doppler cooled to 50uK, and spin-polarised with 96% purity into the |F=2,mF=+2> ground state within 5ms, in preparation for loading a purely magnetic trap. A millimeter sized copper Z-shaped conductor located beneath the atom chip surface creates a Ioffe-Pritchard magnetic trap, into which the laser cooled cloud is loaded with 70% efficiency, and can be held with a vacuum-limited lifetime of 40s. Evaporative cooling then pre-cools the sample to below 20uK within 10s, to allow the subsequent loading into potentials created by the atom chip with 100% efficiency. A final evaporation stage then cools the cloud below the phase transition temperature of 800nK, resulting finally in pure BECs with 105 atoms confined using the atom chip. Key measurements of various properties of the trapped condensates are presented, which are important in order to characterise the system fully, and to compare with theoretical expectations. In particular, included are the variation of condensate fraction with temperature, the BEC expansion dynamics, and the condensate lifetime in the trap, for example. Finally, it is demonstrated how BECs can be produced on the atom chip without the use of external macroscopic coils, achieved by using novel, integrated sheet structures located beneath the chip surface - unique to this experimental system - to create the necessary bias fields.
This thesis describes and characterizes a setup to conduct experiments combining the fields of cold atoms and nanophotonics. Furthermore, a series of numerical simulations is employed to deepen of atom transport under experimentally realistic conditions. The study of cold atoms is usually fundamental in nature and a very clean approach to investigate the laws of physics. High purity samples of atoms are cooled down to millikelvins or microkelvins. The potential landscape for the atoms can be carefully controlled using lasers and/or magnetic fields. Since the atoms' responses to electric, magnetic or electromagnetic fields are known with very high fidelity, any deviations to the state the atoms are prepared in can be precisely measured. Nanophotonics is the study of light close to or beyond the diffraction limit. In this region the field-like nature of light starts to play a role. By confining light in sub-wavelength-sized structures, high peak intensities can be achieved, giving rise to exciting non-linear optics phenomena. The strong field gradient that can be created allows, for instance, precise spectroscopy measurements, phase-sensitive sub-wavelength microscopy, as well as producing highly receptive sensing devices. Combining cold atoms and nanophotonics creates strong synergy effects. It gives access to strong coupling of light and matter. The scalability of nanophotonics now extends to atomic physics. Atoms can be trapped, coupled and manipulated at very small length scales, and in large numbers. Moreover, the potential landscape for atoms is highly customizable. The rubidium isotope 87 is used in this setup. A cloud of rubidium atoms is gathered and cooled in a two dimensional magneto-optical trap (MOT). Since the atoms are only cooled in two dimensions, they are free to escape in the third dimension and load a following three dimensional MOT. The atoms are now cooled further, compressed and loaded into an optical dipole trap. This dipole trap transports the atoms close to a sample inside the vacuum chamber. A moving optical lattice, or optical conveyor belt, brings the atoms then close to the sample surface. Now experiments can be conducted, studying the interaction of cold atoms and strongly confined light. The atom transport down to the sample surface shows some unexpected behaviour: the atoms seem to spread through the optical lattice during transport. A combination of microscopic and macroscopic numerical simulations, including genetic algorithms, are used to deepen our understanding of the underlying physics. This also allows us to get access to experimental variables that cannot be directly obtained.
In order to take quantum mechanical systems out of the lab and produce practical devices, a method of miniaturizing and integrating apparatus components is needed. In the context of ultracold atomic gas experiments, the ideal method of achieving this miniaturization is the implementation of atom chip technology. By depositing micro-scale current carrying wires onto planar substrates, it is possible to create a magnetic trap capable of confining a cloud of neutral atoms in sufficient proximity to the chip surface for solid state devices to interact with the cloud. This thesis presents our lab’s first steps towards creating an atom chip capable of confining a cloud of rubidium-87. The chip prototypes were developed with the intent to incorporate them into the hybrid system apparatus within our lab. The chips are intended to serve as a platform for facilitating the interaction between the atomic gas ensemble and mesoscopic solid-state devices, allowing for the hybridization of the two systems. In this work I describe the design of the trapping wire configuration and the fabrication of the first two generations of chip prototypes. Additionally, I provide numerical simulations of the produced magnetic field, from which estimates of the trap frequency and depth can be calculated. Finally, I introduce some basic characterization tests of the absolute current limitations and resistive behavior of the chip wires, and the dimensional uniformity of the fabricated wire profiles.
Atom chips are devices used to magnetically trap and manipulate ultracold atoms and Bose-Einstein condensates near a surface. In particular, permanent magnetic film atom chips can allow very tight confinement and intricate magnetic field designs while circumventing technical current noise. Research described in this thesis is focused on the development of a magnetic film atom chip, the production of Bose-Einstein condensates near the film surface, the characterisation of the associated magnetic potentials using rf spectroscopy of ultracold atoms and the realisation of a precision sensor based on splitting Bose-Einstein condensates in a double-well potential. The atom chip itself combines the edge of a perpendicularly magnetised GdTbFeCo film with a machined silver wire structure. A mirror magneto-optical trap collects up to 5 x 108 87Rb atoms beneath the chip surface. The current-carrying wires are then used to transfer the cloud of atoms to the magnetic film microtrap and radio frequency evaporative cooling is applied to produce Bose-Einstein condensates consisting of 1 x 105 atoms. We have identified small spatial magnetic field variations near the film surface that fragment the ultracold atom cloud. These variations originate from inhomogeneity in the film magnetisation and are characterised using a novel technique based on spatially resolved radio frequency spectroscopy of the atoms to map the magnetic field landscape over a large area. The observations agree with an analytic model for the spatial decay of random magnetic fields from the film surface. Bose-Einstein condensates in our unique potential landscape have been used as a precision sensor for potential gradients. We transfer the atoms to the central region of the chip which produces a double-well potential. A single BEC is formed far from the surface and is then dynamically split in two by moving the trap closer to the surface. After splitting, the population of atoms in each well is extremely sensitive to the asymmetry of the potential and can be used to sense tiny magnetic field gradients or changes in gravity on a small spatial scale.
The entry into the new millennium was marked in the quantum community by the first experimental realizations of the Bose-Einstein condensation of atoms in a vapor, achieved in different research groups. Twenty-five years later, such systems are 'routinely' produced and are the core of many experiments. At the frontier between condensed matter their y, quantum optics, and atomic physics, ultra-cold atoms are subjects of high scientific interest.Ultra-cold gas can be trapped in optical lattices, giving a realistic way of experimentally realizing a new range of lattice Hamiltonians, that are used to simulate condensed matter systems. In these simulations, ultra-cold atoms are used to mimic the behavior of electrons in a solid-state material and could be used to simulate a wide range of complex condensed matter phenomena, such as the fractional quantum Hall effect, topological insulators, and high-temperature superconductivity.In order to study such systems, diffraction-limited quantum gas microscopes have emerged as a way to manipulate and detect atoms trapped in lattice potentials. Using far-field interference, experiments have mainly been restricted to a lattice spacing of 500 nm. This limits the speed of dynamics of all physical processes.Higher energy regimes could be accessed by reducing the lattice spacing. For this purpose, one of the long-term goals of the team is to trap atoms in the near-field of a surface and to make use of the Casimir-Polder forces to shape sub-wavelength potentials. Thanks to nano-fabrication capabilities, the spacing can be reduced to a few tens of nanometers. However, this requires to adapt the imaging techniques to observe cold-atoms with sub-wavelength spatial resolutions.In this PhD thesis, I report first on the advances toward implementing an atom chip in our experiment, which will serve as an integrated platform to manipulate the quantum gas. I present simulations and study an experimental solution allowing the cloud to be transported to the near-field. The method is based on the interference of a laser radiation in the near field of a rotating surface. It has been fully simulated, and the limitations have been numerically and experimentally assessed. I conclude this part by presenting the first model of chip that has been fabricated.In a second part, I report on the development of a sub-wavelength imaging method of cold Rubidium 87 atoms which is based on excited state dressing. I detail the concept of this nano-metric spatial resolution method and apply it to super-resolve a single longitudinal wave function trapped in a tight lattice that exhibits a width below 30 nm.
This paper reports on experiments with ultracold rubidium atoms confined in microscopic magnetic traps created using a piece of periodically magnetized videotape mounted on an atom chip. The roughness of the confining potential is studied with atomic clouds at temperatures of a few μK and at distances between 30 and 80 μm from the videotape-chip surface. The inhomogeneities in the magnetic field created by the magnetized videotape close to the central region of the chip are characterized in this way. In addition, we demonstrate a novel transport mechanism whereby we convey cold atoms confined in arrays of videotape magnetic micro-traps over distances as large as ∼1 cm parallel to the chip surface. This conveying mechanism enables us to survey the surface of the chip and observe potential-roughness effects across different regions.