This article investigates and improves optical properties of slow light devices. The device structure consists GaAs/AlGaAs [110] strained quantum wells (QWs) based on V-type electromagnetically induced transparency (EIT). In this paper, we use an analytical model in fractional dimension in order to simulate and analysis slow light device. Effects of well width variation have been investigated on exciton oscillator strength (EOS) and fractional dimension parameter. Influences of these parameters alterations have been illustrated in optical properties of slow light system such as slow down factor (SDF) and central energy of the device. Based on obtained results, we can adjust optical variables of slow light system with controlling the well thickness. Using proposed method, we have also estimated the maximum value of SDF about 9×103.
This article investigates and improves optical properties of slow light devices. The device structure consists GaAs/AlGaAs [110] strained quantum wells (QWs) based on V-type electromagnetically induced transparency (EIT). In this paper, we use an analytical model in fractional dimension in order to simulate and analysis slow light device. Effects of well width variation have been investigated on exciton oscillator strength (EOS) and fractional dimension parameter. Influences of these parameters alterations have been illustrated in optical properties of slow light system such as slow down factor (SDF) and central energy of the device. Based on obtained results, we can adjust optical variables of slow light system with controlling the well thickness. Using proposed method, we have also estimated the maximum value of SDF about 9×103.
We report a theoretical study of optical properties of AlGaAs/GaAs multiple quantum-well (MQW), slow-light devices based on excitonic population oscillations under applied external magnetic and electric fields using an analytical model for complex dielectric constant of Wannier excitons in fractional dimension. The results are shown for quantum wells (QWs) of different width. The significant characteristics of the exciton in QWs such as exciton energy and exciton oscillator strength (EOS) can be varied by application of external magnetic and electric fields. It is found that a higher bandwidth and an appropriate slow-down factor (SDF) can be achieved by changing the QW width during the fabrication process and by applying magnetic and electric fields during device functioning, respectively. It is shown that a SDF of is obtained at best.
In this paper, a slow light device, which is composed of GaAs/AlGaAs [110] strained quantum wells, has been studied to realize V-type electromagnetically induced transparency phenomenon. Influences of applying electric and magnetic fields are investigated theoretically on main properties of the slow light devices, such as slow down factor and refractive index, based on Bloch equations approach. This is the first study of applying external magnetic and electric fields impacts on proposed structure by using V-type electromagnetically induced transparency. By changing the external fields, we are able to modify central frequency of presented structure that provides appropriate conditions in order to be utilized in optical storages, optical buffers and all-optical switches. According to the simulation results, the peak value of slow down factor is estimated to near 5000 when power intensity of pump and signal are 10 kW/cm2 and 0.1 kW/cm2, respectively. With optimization the amount of external fields, the central frequency of system can reach positive shift as high as 1.1 THz and negative shift close to -1.1 THz.
The influence of barrier thickness variations on the operation of GaAs/AlGaAs multiple quantum well (MQW) slow light devices based on coherence population oscillations (CPOs) is explained. The variations are shown to affect the slow down factor (SDF) and bandwidth of these devices. Bloch equations and the analytical model in fractional dimension are used to analyse and simulate the slow light device. It is shown that other physical parameters of MQW structures (QW width and barrier alloy concentration) affect significantly the optical properties of the device. The presented approaches make it possible to achieve suitable values of SDF and focal energy by adjusting the barrier thickness, QW width and aluminium content. The maximum range of the centre frequency tuning is estimated to be about 1 THz in our calculations, while the slow down factor can reach a high value of 8.5 × 10 4 .
This paper demonstrates the effects of applying magnetic and electric fields and physical dimensions alterations on AlGaAs/GaAs multiple quantum well (QW) slow light devices. Physical parameters include quantum well sizes and number of quantum wells. To the best of our knowledge, this is the first analysis of the effects of both applying magnetic/electric fields and physical parameters alterations and the first suggestion for matching the prefabrication and post fabrication tuning of the slow light devices based on excitonic population oscillations. The aim of our theoretical analysis is controlling the optical properties such as central frequency, bandwidth, and slow down factor (SDF) in slow light devices based on excitonic population oscillation to achieve better tuning. To reach these purposes, first we investigate the quantum well size and number of quantum wells alteration effects. Next, we analyze the effects of applying magnetic and electric fields to the multiple quantum well structure, separately. Finally, physical parameters and applied external fields are changed for measuring frequency shift and SDF for coherent population oscillation slow light devices. The results show the available central frequency shifts in about 1.6 THz at best. Also the SDF value improvement is about one order of magnitude. These results will be applicable for optical nonlinearity enhancements, all-optical signal processing, optical communications, all-optical switches, optical modulators, and variable true delays.
This paper investigates the effects of quantum well size changes on center frequency and slow down factor of an slow light device. In this way, we consider the quantum well size alteration effects on oscillator strength and binding energy of exciton. First, we investigate the variations in oscillator strength of exciton due to different quantum well size. Second, exciton binding energy level shift due to size of quantum well is investigated. According to this analysis, we have developed a new method for tuning slow light device bandwidth center frequency and slow down factor. Analysis and simulation of a basic GaAs/AlGaAs quantum wells optical slow light device based on excitonic population oscillation shows that size of quantum wells could tune both of the frequency properties and slow down factor of an optical slow light device. In our simulation with 34 quantum wells each with the width of 60?, we have received the slow down factor of more than 60,000. These achievements are useful in optical nonlinearity enhancements, all-optical signal processing applications and optical communications.
In this paper we analyze the structure of two types of quantum dots slow light devices. The first model is slow light devices based on coherent population oscillation (CPO), in this method, slow light device has a pump and signal, the simulation results in the form of curves with refractive index, absorption and slow down factor based on detuning changes is estimated. In the second model, with tunneling induced transparency (TIT) method, slow light device has an electric voltage. The simulation results in the form of curves with refractive index, absorption and Vg/C based on alteration photon energy is plotted. For better comparison with CPO method, in the next step, SDF curve is plotted for slow light device based on TIT. According to this figure, it can be realized that the amount of SDF for slow light using TIT are much higher than the amount of SDF for slow light using CPO. And finally we obtained maximum SDF variations as a function of radius of quantum dots, for both methods. According to this curve, when radius is 4 nm, SDF with slow light device based on TIT, 76 times higher than SDF with slow light device based on CPO and it can be noticed that the maximum SDF and radius of quantum dots, has reverse proportion.