Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Journal of Applied Physics

Multi-excitation adiabatic quantum-flux-parametron

Kun Fang, Naoki Takeuchi, Takumi Ando, Yuki Yamanashi, Nobuyuki Yoshikawa

Published Apr 10, 2017• 8 citations
Publisher

Abstract

Adiabatic quantum-flux-parametron (AQFP) circuits are very low-power due to zero static power consumption and adiabatic switching operations. However, compared to other superconducting circuits, such as rapid single-flux-quantum logic, the operation frequency is relatively low and the latency is relatively large. In this work, we propose multi-excitation AQFP (ME-AQFP) circuits for high-speed and low-latency operations. In ME-AQFP, the intrinsic periodicity of the potential energy of a Josephson device with respect to applied magnetic fluxes is utilized to multiply operation frequencies and reduce latency. In a numerical simulation, we demonstrated an ME-AQFP AND gate, which operates at 10 GHz or 20 GHz with 5-GHz excitation currents. We also evaluated the energy efficiency of ME-AQFP circuits. In an experiment, we successfully demonstrated an ME-AQFP XOR gate and an ME-AQFP full adder.

DOI
10.1063/1.4979856

Related papers

Adiabatic quantum-flux-parametron boosters for long interconnection and large fanouts

Naoya Mizushima, Naoki Takeuchi, Yuki Yamanashi +1 more

Abstract Adiabatic quantum flux parametron (AQFP) is energy-efficient superconducting logic that operates with zero static energy consumption and extremely small dynamic energy consumption thanks to the adiabatic switching of the logic gates. One drawback in AQFP logic circuits is the wire length and fan-out limitations because of the low driving ability of the logic gates, which results in a large circuit area and significant latency. In the present study, we propose AQFP boosters with high driving ability. Two types of AQFP boosters are proposed: one is composed of a parallel connection of AQFP buffers, and the other uses multistage buffers driven by one excitation clock. We evaluated the maximum wire length of the proposed boosters by circuit simulations, including thermal noises, and found that the maximum wire length is 3.9 mm for fan-out one and 1 mm for fan-out four. We implemented the boosters and demonstrated their correct operations at low-speed tests. We also demonstrated a 5-to-31 decoder using the proposed boosters. It was shown that the circuit area, latency, and energy consumption were improved by about 30% compared to the design without the boosters.

Superconductor Science and Technology•Aug 11, 2023•4 citations

Low-latency adiabatic superconductor logic using delay-line clocking

Naoki Takeuchi, Mai Nozoe, Yuxing He +1 more

Adiabatic quantum-flux-parametron (AQFP) logic is an energy-efficient superconductor logic family. The switching energy of an AQFP gate can be arbitrarily reduced via adiabatic switching. However, AQFP logic has somewhat long latency due to the multiphase clocking scheme, in which each logic operation requires a quarter clock cycle. The latency in AQFP logic should be improved in order to design complex digital circuits such as microprocessors. In the present paper, we propose a low-latency clocking scheme for AQFP logic, which we call delay-line clocking. In delay-line clocking, the latency for each logic operation is determined by the propagation delay of the excitation current, which can be much shorter than a quarter clock cycle. Our numerical simulation shows that AQFP gates can operate with a latency of only a few picoseconds. We fabricated an AQFP circuit adopting delay-line clocking using the 10 kA/cm2 Nb high-speed standard process provided by the National Institute of Advanced Industrial Science and Technology. The circuit was demonstrated at 4 GHz with a latency of 10 ps per gate. The above results indicate that delay-line clocking can significantly reduce the latency in AQFP logic.

Applied Physics Letters•Aug 12, 2019•33 citations

Adiabatic quantum-flux-parametron with delay-line clocking: logic gate demonstration and phase skipping operation

Taiki Yamae, Naoki Takeuchi, Nobuyuki Yoshikawa

Abstract Adiabatic quantum-flux-parametron (AQFP) logic is an energy-efficient superconductor logic family. The latency of AQFP circuits is relatively long compared to that of other superconductor logic families and thus such circuits require low-latency clocking schemes. In a previous study, we proposed a low-latency clocking scheme called delay-line clocking, in which the latency for each logic operation is determined by the propagation delay of the excitation current, and demonstrated a simple AQFP buffer chain that adopts delay-line clocking. However, it is unclear whether more complex AQFP circuits can adopt delay-line clocking. In the present study, we demonstrate AQFP logic gates (AND and XOR gates) that use delay-line clocking as a step towards implementing large-scale AQFP circuits with delay-line clocking. AND and XOR gates with a latency of approximately 20 ps per gate are shown to operate at up to 5 and 4 GHz, respectively, in experiments. We also demonstrate that delay-line clocking enables phase skipping operation, in which some of the AQFP buffers for phase synchronization are removed to reduce the junction count and energy dissipation. The results indicate that delay-line clocking can enable low-latency, low-energy, large-scale AQFP circuits.

arXiv:2107.12020•Superconductor Science and Technology•Oct 11, 2021•14 citations

Operation of an Adiabatic Quantum-Flux-Parametron Gate Using an On-Chip AC Power Source

Takashi Mukaiyama, Naoki Takeuchi, Kohei Ehara +3 more

Adiabatic quantum-flux-parametron (AQFP) logic devices can operate under extremely low bit energy approaching the thermal limit by varying their potential energy adiabatically using ac bias currents. We have proposed an on-chip ac power source, which is composed of a Josephson relaxation oscillator and a superconductingLCresonator in order to drive AQFP circuits at 5 GHz or higher frequencies. We herein experimentally confirmed the correct switching operation of an AQFP gate at 4.94 GHz using the proposed on-chip ac power source. Furthermore, we confirmed that the ac power source can drive approximately 800 AQFP gates.

IEEE Transactions on Applied Superconductivity•Apr 8, 2013•7 citations

Demonstration of 10k Gate-Scale Adiabatic-Quantum-Flux-Parametron Circuits

Tatsuya Narama, Yuki Yamanashi, Naoki Takeuchi +2 more

Adiabatic quantum flux parametron (AQFP) is a very energy-efficient superconductor logic. In AQFP logic, dynamic energy dissipation can be drastically reduced due to adiabatic switching operations using ac excitation currents. In the present study, we evaluated circuit yields using a large-scale AQFP circuit composed of as many as 10,000 AQFP gates with approximately 20,000 Josephson junctions. We measured eleven chips from four wafers and obtained circuit yields of 48% for 1,000-gate circuits and 22% for 10,000-gate circuits, respectively. In all the circuits, which worked correctly, the margins of excitation currents were as wide as approximately ±20%.

IEEE International Superconductive Electronics Conference (ISEC)•Jul 1, 2015•13 citations

Recent Progress on Adiabatic Quantum-flux-parametron Logic for Extremely Low-power Microprocessors

Naoki Takeuchi

We report recent progress on adiabatic quantum-flux-parametron (AQFP) logic, which is an energy-efficient superconductor logic based on quantum flux parametron (QFP). The switching energy of an AQFP gate can be arbitrarily reduced via adiabatic switching, in which the shape of the potential energy gradually varies between single-well and double-well shapes as the result of using ac excitation magnetic fluxes. First, we show the operation principle of AQFP and explain adiabatic switching in light of potential energy shapes. We also show calculated switching energy and bit error rates to demonstrate that the switching energy of AQFP can be significantly reduced while keeping a low error rate. Then, we report recently developed AQFP subsystems, which include an 8-bit carry look-ahead adder, a register file, and a long-interconnect driver. Our demonstration reveals that AQFP technology is ready to be applied in microprocessor design.

TEION KOGAKU (Journal of Cryogenics and Superconductivity Society of Japan)•Jan 1, 2017•1 citation
Adiabatic quantum-flux-parametron (AQFP) circuits are very low-power due to zero static power consumption and adiabatic switching operations. However, compared to other superconducting circuits, such as rapid single-flux-quantum logic, the operation frequency is relatively low and the latency is relatively large. In this work, we propose multi-excitation AQFP (ME-AQFP) circuits for high-speed and low-latency operations. In ME-AQFP, the intrinsic periodicity of the potential energy of a Josephson device with respect to applied magnetic fluxes is utilized to multiply operation frequencies and reduce latency. In a numerical simulation, we demonstrated an ME-AQFP AND gate, which operates at 10 GHz or 20 GHz with 5-GHz excitation currents. We also evaluated the energy efficiency of ME-AQFP circuits. In an experiment, we successfully demonstrated an ME-AQFP XOR gate and an ME-AQFP full adder.
Abstract Adiabatic quantum flux parametron (AQFP) is energy-efficient superconducting logic that operates with zero static energy consumption and extremely small dynamic energy consumption thanks to the adiabatic switching of the logic gates. One drawback in AQFP logic circuits is the wire length and fan-out limitations because of the low driving ability of the logic gates, which results in a large circuit area and significant latency. In the present study, we propose AQFP boosters with high driving ability. Two types of AQFP boosters are proposed: one is composed of a parallel connection of AQFP buffers, and the other uses multistage buffers driven by one excitation clock. We evaluated the maximum wire length of the proposed boosters by circuit simulations, including thermal noises, and found that the maximum wire length is 3.9 mm for fan-out one and 1 mm for fan-out four. We implemented the boosters and demonstrated their correct operations at low-speed tests. We also demonstrated a 5-to-31 decoder using the proposed boosters. It was shown that the circuit area, latency, and energy consumption were improved by about 30% compared to the design without the boosters.
Adiabatic quantum-flux-parametron (AQFP) logic is an energy-efficient superconductor logic family. The switching energy of an AQFP gate can be arbitrarily reduced via adiabatic switching. However, AQFP logic has somewhat long latency due to the multiphase clocking scheme, in which each logic operation requires a quarter clock cycle. The latency in AQFP logic should be improved in order to design complex digital circuits such as microprocessors. In the present paper, we propose a low-latency clocking scheme for AQFP logic, which we call delay-line clocking. In delay-line clocking, the latency for each logic operation is determined by the propagation delay of the excitation current, which can be much shorter than a quarter clock cycle. Our numerical simulation shows that AQFP gates can operate with a latency of only a few picoseconds. We fabricated an AQFP circuit adopting delay-line clocking using the 10 kA/cm2 Nb high-speed standard process provided by the National Institute of Advanced Industrial Science and Technology. The circuit was demonstrated at 4 GHz with a latency of 10 ps per gate. The above results indicate that delay-line clocking can significantly reduce the latency in AQFP logic.
Abstract Adiabatic quantum-flux-parametron (AQFP) logic is an energy-efficient superconductor logic family. The latency of AQFP circuits is relatively long compared to that of other superconductor logic families and thus such circuits require low-latency clocking schemes. In a previous study, we proposed a low-latency clocking scheme called delay-line clocking, in which the latency for each logic operation is determined by the propagation delay of the excitation current, and demonstrated a simple AQFP buffer chain that adopts delay-line clocking. However, it is unclear whether more complex AQFP circuits can adopt delay-line clocking. In the present study, we demonstrate AQFP logic gates (AND and XOR gates) that use delay-line clocking as a step towards implementing large-scale AQFP circuits with delay-line clocking. AND and XOR gates with a latency of approximately 20 ps per gate are shown to operate at up to 5 and 4 GHz, respectively, in experiments. We also demonstrate that delay-line clocking enables phase skipping operation, in which some of the AQFP buffers for phase synchronization are removed to reduce the junction count and energy dissipation. The results indicate that delay-line clocking can enable low-latency, low-energy, large-scale AQFP circuits.
Adiabatic quantum-flux-parametron (AQFP) logic devices can operate under extremely low bit energy approaching the thermal limit by varying their potential energy adiabatically using ac bias currents. We have proposed an on-chip ac power source, which is composed of a Josephson relaxation oscillator and a superconductingLCresonator in order to drive AQFP circuits at 5 GHz or higher frequencies. We herein experimentally confirmed the correct switching operation of an AQFP gate at 4.94 GHz using the proposed on-chip ac power source. Furthermore, we confirmed that the ac power source can drive approximately 800 AQFP gates.
Adiabatic quantum flux parametron (AQFP) is a very energy-efficient superconductor logic. In AQFP logic, dynamic energy dissipation can be drastically reduced due to adiabatic switching operations using ac excitation currents. In the present study, we evaluated circuit yields using a large-scale AQFP circuit composed of as many as 10,000 AQFP gates with approximately 20,000 Josephson junctions. We measured eleven chips from four wafers and obtained circuit yields of 48% for 1,000-gate circuits and 22% for 10,000-gate circuits, respectively. In all the circuits, which worked correctly, the margins of excitation currents were as wide as approximately ±20%.
We report recent progress on adiabatic quantum-flux-parametron (AQFP) logic, which is an energy-efficient superconductor logic based on quantum flux parametron (QFP). The switching energy of an AQFP gate can be arbitrarily reduced via adiabatic switching, in which the shape of the potential energy gradually varies between single-well and double-well shapes as the result of using ac excitation magnetic fluxes. First, we show the operation principle of AQFP and explain adiabatic switching in light of potential energy shapes. We also show calculated switching energy and bit error rates to demonstrate that the switching energy of AQFP can be significantly reduced while keeping a low error rate. Then, we report recently developed AQFP subsystems, which include an 8-bit carry look-ahead adder, a register file, and a long-interconnect driver. Our demonstration reveals that AQFP technology is ready to be applied in microprocessor design.