Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Transactions on Applied Superconductivity

Operation of an Adiabatic Quantum-Flux-Parametron Gate Using an On-Chip AC Power Source

Takashi Mukaiyama, Naoki Takeuchi, Kohei Ehara, Kenta Inoue, Yuki Yamanashi, Nobuyuki Yoshikawa

Published Apr 8, 2013• 7 citations
Publisher

Abstract

Adiabatic quantum-flux-parametron (AQFP) logic devices can operate under extremely low bit energy approaching the thermal limit by varying their potential energy adiabatically using ac bias currents. We have proposed an on-chip ac power source, which is composed of a Josephson relaxation oscillator and a superconductingLCresonator in order to drive AQFP circuits at 5 GHz or higher frequencies. We herein experimentally confirmed the correct switching operation of an AQFP gate at 4.94 GHz using the proposed on-chip ac power source. Furthermore, we confirmed that the ac power source can drive approximately 800 AQFP gates.

DOI
10.1109/tasc.2013.2251465

Related papers

Design and demonstration of an on-chip AC power source for adiabatic quantum-flux-parametron logic

Takashi Mukaiyama, Naoki Takeuchi, Yuki Yamanashi +1 more

Adiabatic quantum-flux-parametron (AQFP) logic is a promising technology for use in future high-end computers because its bit energy can be potentially reduced to the order of thermal energy. AQFP gates are driven by an AC bias current, which changes their potential energy adiabatically. In the present paper, we propose an on-chip AC power source, which is composed of a Josephson relaxation oscillator and a superconducting resonator, to drive the AQFP gates. We designed and implemented the AC power source using a Nb Josephson integrated circuit process. We confirmed that the AC power source can generate a 4.4 GHz sinusoidal current from a DC bias current and that the output amplitude of the AC power source can be controlled by varying the DC bias current.

Superconductor Science and Technology•Feb 6, 2013•8 citations

Multi-excitation adiabatic quantum-flux-parametron

Kun Fang, Naoki Takeuchi, Takumi Ando +2 more

Adiabatic quantum-flux-parametron (AQFP) circuits are very low-power due to zero static power consumption and adiabatic switching operations. However, compared to other superconducting circuits, such as rapid single-flux-quantum logic, the operation frequency is relatively low and the latency is relatively large. In this work, we propose multi-excitation AQFP (ME-AQFP) circuits for high-speed and low-latency operations. In ME-AQFP, the intrinsic periodicity of the potential energy of a Josephson device with respect to applied magnetic fluxes is utilized to multiply operation frequencies and reduce latency. In a numerical simulation, we demonstrated an ME-AQFP AND gate, which operates at 10 GHz or 20 GHz with 5-GHz excitation currents. We also evaluated the energy efficiency of ME-AQFP circuits. In an experiment, we successfully demonstrated an ME-AQFP XOR gate and an ME-AQFP full adder.

Journal of Applied Physics•Apr 10, 2017•8 citations

Demonstration of 10k Gate-Scale Adiabatic-Quantum-Flux-Parametron Circuits

Tatsuya Narama, Yuki Yamanashi, Naoki Takeuchi +2 more

Adiabatic quantum flux parametron (AQFP) is a very energy-efficient superconductor logic. In AQFP logic, dynamic energy dissipation can be drastically reduced due to adiabatic switching operations using ac excitation currents. In the present study, we evaluated circuit yields using a large-scale AQFP circuit composed of as many as 10,000 AQFP gates with approximately 20,000 Josephson junctions. We measured eleven chips from four wafers and obtained circuit yields of 48% for 1,000-gate circuits and 22% for 10,000-gate circuits, respectively. In all the circuits, which worked correctly, the margins of excitation currents were as wide as approximately ±20%.

IEEE International Superconductive Electronics Conference (ISEC)•Jul 1, 2015•13 citations

Recent Progress on Adiabatic Quantum-flux-parametron Logic for Extremely Low-power Microprocessors

Naoki Takeuchi

We report recent progress on adiabatic quantum-flux-parametron (AQFP) logic, which is an energy-efficient superconductor logic based on quantum flux parametron (QFP). The switching energy of an AQFP gate can be arbitrarily reduced via adiabatic switching, in which the shape of the potential energy gradually varies between single-well and double-well shapes as the result of using ac excitation magnetic fluxes. First, we show the operation principle of AQFP and explain adiabatic switching in light of potential energy shapes. We also show calculated switching energy and bit error rates to demonstrate that the switching energy of AQFP can be significantly reduced while keeping a low error rate. Then, we report recently developed AQFP subsystems, which include an 8-bit carry look-ahead adder, a register file, and a long-interconnect driver. Our demonstration reveals that AQFP technology is ready to be applied in microprocessor design.

TEION KOGAKU (Journal of Cryogenics and Superconductivity Society of Japan)•Jan 1, 2017•1 citation

Feedback-enabled low-latency adiabatic quantum-flux-parametron logic using a mixed clocking scheme

Yuxing He, Zhiliang Lei, Changning Wei +5 more

Abstract Adiabatic quantum-flux-parametron (AQFP) logic stands as an energy-efficient superconductor logic family relying on ac excitations. Though a four-phase clocking scheme has been commonly applied to excite and clock AQFP circuits, the cost of multiple sources and long between-stage latency (a quarter clock cycle) remain unsatisfactory. These drawbacks are more severe for sequential logics, where feedback loops require both down-flow and reverse-flow AQFP gates, necessitating extra buffers and imposing a limit on operating depth at the same time. To overcome these restrictions, in this paper, we introduce a novel mixed clocking scheme for low-latency AQFP logic circuits allowing feedback loops. In particular, the down-flow part of the AQFP circuit is excited by an ac current through delay-lines, which can reduce the latency from input to output stages. Meanwhile, the reverse-flow part is clocked by 2 other ac currents with 90° phase difference to reduce the buffering gates. The proposed clocking scheme is first applied to a fundamental logic circuit, confirming correct functionality and low-latency operations for diverse feedback conditions. For experimental validation, we design and fabricate a 3-bit AQFP counter using the proposed clocking scheme based on an on-chip clock splitter. The circuit is examined at 4 GHz under 4.2 K temperature, where we obtain desired operations and wide excitation margins.

Superconductor Science and Technology•Dec 20, 2024•0 citations

Simulation and Experimental Demonstration of Logic Circuits Using an Ultra-Low-Power Adiabatic Quantum-Flux-Parametron

Koji Inoue, Naoki Takeuchi, Kei Ehara +2 more

We have been investigating an ultra-low-power adiabatic quantum-flux-parametron (AQFP) logic, the energy dissipation of which can be decreased by changing its potential energy slowly or adiabatically. In the present study, we designed basic AQFP logic gates and an AQFP 1-bit full adder, and examined their operations through simulations and experiments. The AQFP 1-bit full adder is composed of 46 Josephson junctions, which is approximately one-quarter the number of junctions of a full adder using conventional rapid single-flux-quantum logic. The measurement results indicated that the AQFP 1-bit full adder has a wide current bias margin of as large as ±27.8%.

IEEE Transactions on Applied Superconductivity•Dec 24, 2012•39 citations
Adiabatic quantum-flux-parametron (AQFP) logic devices can operate under extremely low bit energy approaching the thermal limit by varying their potential energy adiabatically using ac bias currents. We have proposed an on-chip ac power source, which is composed of a Josephson relaxation oscillator and a superconductingLCresonator in order to drive AQFP circuits at 5 GHz or higher frequencies. We herein experimentally confirmed the correct switching operation of an AQFP gate at 4.94 GHz using the proposed on-chip ac power source. Furthermore, we confirmed that the ac power source can drive approximately 800 AQFP gates.
Adiabatic quantum-flux-parametron (AQFP) logic is a promising technology for use in future high-end computers because its bit energy can be potentially reduced to the order of thermal energy. AQFP gates are driven by an AC bias current, which changes their potential energy adiabatically. In the present paper, we propose an on-chip AC power source, which is composed of a Josephson relaxation oscillator and a superconducting resonator, to drive the AQFP gates. We designed and implemented the AC power source using a Nb Josephson integrated circuit process. We confirmed that the AC power source can generate a 4.4 GHz sinusoidal current from a DC bias current and that the output amplitude of the AC power source can be controlled by varying the DC bias current.
Adiabatic quantum-flux-parametron (AQFP) circuits are very low-power due to zero static power consumption and adiabatic switching operations. However, compared to other superconducting circuits, such as rapid single-flux-quantum logic, the operation frequency is relatively low and the latency is relatively large. In this work, we propose multi-excitation AQFP (ME-AQFP) circuits for high-speed and low-latency operations. In ME-AQFP, the intrinsic periodicity of the potential energy of a Josephson device with respect to applied magnetic fluxes is utilized to multiply operation frequencies and reduce latency. In a numerical simulation, we demonstrated an ME-AQFP AND gate, which operates at 10 GHz or 20 GHz with 5-GHz excitation currents. We also evaluated the energy efficiency of ME-AQFP circuits. In an experiment, we successfully demonstrated an ME-AQFP XOR gate and an ME-AQFP full adder.
Adiabatic quantum flux parametron (AQFP) is a very energy-efficient superconductor logic. In AQFP logic, dynamic energy dissipation can be drastically reduced due to adiabatic switching operations using ac excitation currents. In the present study, we evaluated circuit yields using a large-scale AQFP circuit composed of as many as 10,000 AQFP gates with approximately 20,000 Josephson junctions. We measured eleven chips from four wafers and obtained circuit yields of 48% for 1,000-gate circuits and 22% for 10,000-gate circuits, respectively. In all the circuits, which worked correctly, the margins of excitation currents were as wide as approximately ±20%.
We report recent progress on adiabatic quantum-flux-parametron (AQFP) logic, which is an energy-efficient superconductor logic based on quantum flux parametron (QFP). The switching energy of an AQFP gate can be arbitrarily reduced via adiabatic switching, in which the shape of the potential energy gradually varies between single-well and double-well shapes as the result of using ac excitation magnetic fluxes. First, we show the operation principle of AQFP and explain adiabatic switching in light of potential energy shapes. We also show calculated switching energy and bit error rates to demonstrate that the switching energy of AQFP can be significantly reduced while keeping a low error rate. Then, we report recently developed AQFP subsystems, which include an 8-bit carry look-ahead adder, a register file, and a long-interconnect driver. Our demonstration reveals that AQFP technology is ready to be applied in microprocessor design.
Abstract Adiabatic quantum-flux-parametron (AQFP) logic stands as an energy-efficient superconductor logic family relying on ac excitations. Though a four-phase clocking scheme has been commonly applied to excite and clock AQFP circuits, the cost of multiple sources and long between-stage latency (a quarter clock cycle) remain unsatisfactory. These drawbacks are more severe for sequential logics, where feedback loops require both down-flow and reverse-flow AQFP gates, necessitating extra buffers and imposing a limit on operating depth at the same time. To overcome these restrictions, in this paper, we introduce a novel mixed clocking scheme for low-latency AQFP logic circuits allowing feedback loops. In particular, the down-flow part of the AQFP circuit is excited by an ac current through delay-lines, which can reduce the latency from input to output stages. Meanwhile, the reverse-flow part is clocked by 2 other ac currents with 90° phase difference to reduce the buffering gates. The proposed clocking scheme is first applied to a fundamental logic circuit, confirming correct functionality and low-latency operations for diverse feedback conditions. For experimental validation, we design and fabricate a 3-bit AQFP counter using the proposed clocking scheme based on an on-chip clock splitter. The circuit is examined at 4 GHz under 4.2 K temperature, where we obtain desired operations and wide excitation margins.
We have been investigating an ultra-low-power adiabatic quantum-flux-parametron (AQFP) logic, the energy dissipation of which can be decreased by changing its potential energy slowly or adiabatically. In the present study, we designed basic AQFP logic gates and an AQFP 1-bit full adder, and examined their operations through simulations and experiments. The AQFP 1-bit full adder is composed of 46 Josephson junctions, which is approximately one-quarter the number of junctions of a full adder using conventional rapid single-flux-quantum logic. The measurement results indicated that the AQFP 1-bit full adder has a wide current bias margin of as large as ±27.8%.