Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Bulletin of the American Physical Society

Linear Ion Chains in Silicon Surface-Electrode Traps

S. Charles Doret, Jason Amini, Ken Wright, Arkadaş Özakın, Curtis Volin, Alexa W. Harter, Richart E. Slusher

Published Jun 14, 2011• 0 citations
OpenAlex

Related papers

Demonstration of a microfabricated surface electrode ion trap

D. Stick, Kevin Fortier, Raymond A. Haltli +4 more

In this paper we present the design, modeling, and experimental testing of surface electrode ion traps fabricated in a heterostructure configuration comprising a silicon substrate, silicon dioxide insulators, and aluminum electrodes. This linear trap has a geometry with symmetric RF leads, two interior DC electrodes, and 40 individual lateral DC electrodes. Plasma enhanced chemical vapor deposition (PECVD) was used to grow silicon dioxide pillars to electrically separate overhung aluminum electrodes from an aluminum ground plane. In addition to fabrication, we report techniques for modeling the control voltage solutions and the successful demonstration of trapping and shuttling ions in two identically constructed traps.

arXiv:1008.0990•Aug 5, 2010•45 citations

Trapping and transforming ions in a surface-electrode chip trap

Ping‐Xing Chen

Bulletin of the American Physical Society•Mar 6, 2018•0 citations

Fast Ion Transport in a Surface Electrode Trap

Susanna Todaro, D. H. Slichter, David J. Wineland +2 more

Bulletin of the American Physical Society•May 28, 2019•0 citations

Design Considerations and Fabrication Challenges of Surface Electrode Ion Trap with TSV Integration

Jing Tao, Hong Yu Li, Peng Zhao +3 more

Surface electrode ion trap with through-silicon-via (TSV) integration enables 3D stacking of ion trap chip on an interposer to eliminate the wire-bonds on the surface electrodes and also addresses the challenge of the ever increasing complexity of surface electrode design with low-parasitic and high-density interconnect requirements. In this work, we demonstrate the design and fabrication of TSV integrated surface electrode ion trap on a 300-mm Si wafer platform. By designing the TSV arrays directly underneath the surface electrodes, the surface electrode foot print is reduced and the TSV traps show better RF performance compared to the planar traps with wire-bonding pads.

IEEE International D Systems Integration Conference•Oct 1, 2019•4 citations

Surface-electrode ion trap development

Timur Abbasov, Sergei A. Zibrov, I. Sherstov

Письма в Журнал экспериментальной и теоретической физики•Dec 15, 2023•0 citations

Design, Fabrication and Characterization of Surface Electrode Ion Trap Integrated with TSV

Peng Zhao, Jing Tao, Hong Yu Li +3 more

Further miniaturization of surface electrode ion trap is restricted by wire bonding connection. To resolve this restriction, integration of conventional surface electrode ion trap with through silicon via (TSV) interconnects is proposed and preliminarily demonstrated. Located directly underneath the DC and RF electrodes, TSVs can transmit the electrical signal from interposer to the electrodes on the top. In this work, electrostatic simulation and fabrication processes are introduced to justify the feasibility of this integration. From the electrical characterization (I-V and C-V tests) results, TSV-integrated ion trap exhibits smaller leakage current and lower capacitance than its wire bonding counterparts due to the elimination of large surface area.

IEEE Electronics Packaging Technology Conference (EPTC)•Dec 1, 2019•13 citations
In this paper we present the design, modeling, and experimental testing of surface electrode ion traps fabricated in a heterostructure configuration comprising a silicon substrate, silicon dioxide insulators, and aluminum electrodes. This linear trap has a geometry with symmetric RF leads, two interior DC electrodes, and 40 individual lateral DC electrodes. Plasma enhanced chemical vapor deposition (PECVD) was used to grow silicon dioxide pillars to electrically separate overhung aluminum electrodes from an aluminum ground plane. In addition to fabrication, we report techniques for modeling the control voltage solutions and the successful demonstration of trapping and shuttling ions in two identically constructed traps.
Surface electrode ion trap with through-silicon-via (TSV) integration enables 3D stacking of ion trap chip on an interposer to eliminate the wire-bonds on the surface electrodes and also addresses the challenge of the ever increasing complexity of surface electrode design with low-parasitic and high-density interconnect requirements. In this work, we demonstrate the design and fabrication of TSV integrated surface electrode ion trap on a 300-mm Si wafer platform. By designing the TSV arrays directly underneath the surface electrodes, the surface electrode foot print is reduced and the TSV traps show better RF performance compared to the planar traps with wire-bonding pads.
Further miniaturization of surface electrode ion trap is restricted by wire bonding connection. To resolve this restriction, integration of conventional surface electrode ion trap with through silicon via (TSV) interconnects is proposed and preliminarily demonstrated. Located directly underneath the DC and RF electrodes, TSVs can transmit the electrical signal from interposer to the electrodes on the top. In this work, electrostatic simulation and fabrication processes are introduced to justify the feasibility of this integration. From the electrical characterization (I-V and C-V tests) results, TSV-integrated ion trap exhibits smaller leakage current and lower capacitance than its wire bonding counterparts due to the elimination of large surface area.