Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Chinese Physics B

Increasing energy relaxation time of superconducting qubits with nonmagnetic infrared filter and shield

Yuhao Liu, Mengmeng Li, Dong Lan, Guangming Xue, Xinsheng Tan, Haifeng Yu, Yang Yu

Published May 1, 2016• 0 citations
Publisher

Abstract

One of the primary origins of the energy relaxation in superconducting qubits is the quasiparticle loss. The quasiparticles can be excited remarkably by infrared radiation. In order to minimize the density of quasiparticle and increase the qubit relaxation time, we design and fabricate the infrared filter and shield for superconducting qubits. In comparison with previous filters and shields, a nonmagnetic dielectric is used as the infrared absorbing material, greatly suppressing the background magnetic fluctuations. The filters can be made to impedance-match with other microwave devices. Using the as-fabricated infrared filter and shield, we increased the relaxation time of a transmon qubit from 519 ns to 1125 ns.

DOI
10.1088/1674-1056/25/5/058501

Related papers

Minimizing quasiparticle generation from stray infrared light in superconducting quantum circuits

R. Barends, J. Wenner, M. Lenander +14 more

We find that quasiparticle generation from stray infrared light creates a significant loss mechanism in superconducting resonators and qubits. We show that resonator quality factors and qubit energy relaxation times are limited by a quasiparticle density of approximately 200 μm−3, induced by 4 K blackbody radiation from the environment. We demonstrate how this influence can be fully removed by isolating the devices from the radiative environment using multistage shielding.

arXiv:1105.4642•Applied Physics Letters•Sep 12, 2011•265 citations

Assessing the Sensitivity of Niobium- and Tantalum-Based Superconducting Qubits to Infrared Radiation

Michael Kerschbaum, Felix Wagner, Uroš Ognjanović +7 more

The use of tantalum films for superconducting qubits has recently extended qubit coherence times significantly, primarily due to reduced dielectric losses at the metal-air interface. However, the choice of base material also influences the sensitivity to quasiparticle-induced decoherence. In this study, we investigate quasiparticle tunneling rates in niobium and tantalum-based offset-charge-sensitive qubits. Using a source of thermal radiation, we characterize the sensitivity of either material to infrared radiation and explore the impact of the infrared background through the targeted use of in-line filters in the wiring and ambient infrared absorbers. We identify both radiation channels as significant contributions to decoherence for tantalum but not for niobium qubits and achieve tunneling rates of 100 Hz and 300 Hz for niobium and tantalum respectively upon installation of infrared filters. Additionally, we find a time-dependence in the observed tunneling rates on the scale of days, which we interpret as evidence of slowly cooling, thermally radiating components in the experimental setup. Our findings indicate that continued improvements in coherence times may require renewed attention to radiative backgrounds and experimental setup design, especially when introducing new material platforms.

quant-pharXiv:2602.05806•Feb 6, 2026•0 citations

A quasiparticle-protected superconducting qubit

Trond Hjerpekjøn Haug, Johan Kolvik, Joey Frey +6 more

Superconducting quantum circuits underpin large-scale quantum processors and are increasingly interfaced with optical systems, yet they are vulnerable to quasiparticle poisoning from high-energy radiation and optical fields. Gap engineering of Josephson junctions suppresses quasiparticle-induced relaxation, but quasiparticles near the junction can still shift the qubit frequency and cause phase errors. Here, we extend gap engineering beyond the junction using a flux-tunable transmon with a gold-on-niobium ground plane and island and strongly gap-engineered aluminum junctions designed to keep quasiparticles away from the junction leads. Compared with an all-aluminum transmon with nominally identical junctions, we demonstrate that the niobium device withstands more than an order of magnitude higher near-infrared optical power before excess relaxation appears. The Nb transmon shows no resolvable quasiparticle-induced frequency shift over the same power range. At the same time, we observe that dephasing and state-preparation-and-measurement infidelity increase with optical power even while relaxation remains protected. These results suggest that engineering the quasiparticle energy landscape beyond the junction can substantially increase qubit resilience, not only to radiation-induced error bursts, but also to nearby optical fields.

quant-pharXiv:2610.12227•Oct 9, 2026•0 citations

LOSS IN SUPERCONDUCTING QUANTUM DEVICES FROM NON-EQUILIBRIUM QUASIPARTICLES AND INHOMOGENEITY IN ENERGY GAP

Rui Zhang

This dissertation describes energy dissipation and microwave loss due to non-equilibrium quasiparticles in superconducting transmon qubits and titanium nitride coplanar waveguide resonators. During the measurements of transmon T1 relaxation time and resonator quality factor QI, I observed reduced microwave loss as the temperature increased from 20 mK to approximately Tc/10 at which the loss takes on a minimum value. I argue that this effect is due to non-equilibrium quasiparticles. I measured the temperature dependence of the relaxation time T1 of the excited state of an Al/AlOx/Al transmon and found that, in some cases, T1 increased by almost a factor of two as the temperature increased from 30 mK to 100 mK with a best T1 of 0.2 ms. I present an argument showing this unexpected temperature dependence occurs due to the behavior of non-equilibrium quasiparticles in devices in which one electrode in the tunnel junction has a smaller volume, and slightly smaller superconducting energy gap, than the other electrode. At sufficiently low temperatures, non-equilibrium quasiparticles accumulate in the electrode with the smaller gap, leading to a relatively high density of quasiparticles at the junction and a short T1. Increasing the temperature gives the quasiparticles enough thermal energy to occupy the higher gap electrode, reducing the density at the junction and increasing T1. I present a model of this effect, extract the density of quasiparticles and the two superconducting energy gaps, and discuss implications for increasing the relaxation time of transmons. I also observed a similar phenomenon in low temperature microwave studies of titanium nitride coplanar waveguide resonators. I report on loss in a resonator at temperatures from 20 mK up to 1.1 K and with the application of infrared pair breaking radiation (λ=1.55 μm). With no applied IR light, the internal quality factor increased from QI = 800,000 at T < 70 mK up to QI=(2×10^6 ) at 600 mK. The resonant frequency f0 increased by 2 parts per million over the same temperature range. Above 600 mK both QI and f0 decreased rapidly, consistent with the increase in the density of thermally generated quasiparticles. With the application of IR light and for intensities below 1 aW μm^(-2) and T < 400 mK, QI increased in a similar way to increasing the temperature before beginning to decrease with larger intensities. I show that a model involving non-equilibrium quasiparticles and two regions of different superconducting gaps can explain this unexpected behavior.

•Jan 1, 2020•1 citation

Nonequilibrium quasiparticles in superconducting circuits: Energy relaxation and charge and flux noise

José Alberto Nava Aquino, Rogério de Sousa

The quasiparticle density observed in low-temperature superconducting circuits is several orders of magnitude larger than the value expected at thermal equilibrium. The tunneling of this excess of quasiparticles across Josephson junctions is recognized as one of the main loss and decoherence mechanisms in superconducting qubits. Here we present a unified impedance theory that accounts for quasiparticle energy loss in circuit regions both far from and near to (across) junctions. Our theory leverages the recent experimental demonstration that the excess quasiparticles are in quasiequilibrium [Connolly et al., Phys. Rev. Lett. 132, 217001 (2024)] and uses a generalized fluctuation-dissipation theorem to predict the amount of charge and flux noise generated by them. We compute the resulting energy relaxation time ${T}_{1}$ in transmon qubits with and without junction asymmetric gap engineering, and show that quasiparticles residing away from junctions can play a dominant role in the former case. They also may provide an upper limit for resonator quality factors if the density of amorphous two-level systems is reduced. In addition, we show that charge noise from quasiparticles leads to flux noise that is logarithmic in frequency, giving rise to a ``nearly white'' contribution that is comparable to the flux noise observed in flux qubits. This contrasts with amorphous two-level systems, whose associated flux noise is shown to be super-Ohmic. We discuss how this quasiparticle flux noise can limit ${T}_{2}^{\ensuremath{\ast}}$ coherence times in flux-tunable qubits. The final conclusion is that asymmetric gap engineering can greatly reduce noise and increase coherence times in superconducting qubits.

arXiv:2407.21177•Physical Review Applied•Sep 18, 2025•2 citations

Fabrication of Superconducting Reflectionless Filters for Quantum Microwave Circuits

Eric Q. Bui

The performance and scalability of superconducting quantum circuits depends critically on the microwave environment. Minimizing signal reflections and suppressing thermal noise are essential for achieving high-fidelity readout and preserving qubit coherence. A significant challenge arises from the use of conventional cryogenic components such as isolators and circulators, which exhibit nonideal out-of-band reflection characteristics. Reflections degrade impedance matching and limit the performance of broadband quantum limited amplifiers. Superconducting implementations of reflectionless microwave filters offer a promising solution to mitigate these issues. The focus of this work is the fabrication and cryogenic characterization of reflectionless filters compatible with superconducting qubit fabrication flows. Devices were implemented on high resistivity silicon substrates using aluminum ground planes, integrated nichrome resistors, and crossovers formed with SiO2 interlayer dielectric. Cryogenic measurements at 20 mK demonstrate high return loss, confirming the viability of these filters for co-fabrication with traveling-wave parametric amplifiers (TWPAs) and circuit quantum electrodynamics (cQED) architectures. The filters exhibit low insertion loss in the passband to maintain quantum measurement efficiency and provide broadband reflection suppression across frequencies relevant to superconducting qubits, offering a scalable way to manage microwave noise in superconducting quantum processors.

•Sep 1, 2025•0 citations
One of the primary origins of the energy relaxation in superconducting qubits is the quasiparticle loss. The quasiparticles can be excited remarkably by infrared radiation. In order to minimize the density of quasiparticle and increase the qubit relaxation time, we design and fabricate the infrared filter and shield for superconducting qubits. In comparison with previous filters and shields, a nonmagnetic dielectric is used as the infrared absorbing material, greatly suppressing the background magnetic fluctuations. The filters can be made to impedance-match with other microwave devices. Using the as-fabricated infrared filter and shield, we increased the relaxation time of a transmon qubit from 519 ns to 1125 ns.
The use of tantalum films for superconducting qubits has recently extended qubit coherence times significantly, primarily due to reduced dielectric losses at the metal-air interface. However, the choice of base material also influences the sensitivity to quasiparticle-induced decoherence. In this study, we investigate quasiparticle tunneling rates in niobium and tantalum-based offset-charge-sensitive qubits. Using a source of thermal radiation, we characterize the sensitivity of either material to infrared radiation and explore the impact of the infrared background through the targeted use of in-line filters in the wiring and ambient infrared absorbers. We identify both radiation channels as significant contributions to decoherence for tantalum but not for niobium qubits and achieve tunneling rates of 100 Hz and 300 Hz for niobium and tantalum respectively upon installation of infrared filters. Additionally, we find a time-dependence in the observed tunneling rates on the scale of days, which we interpret as evidence of slowly cooling, thermally radiating components in the experimental setup. Our findings indicate that continued improvements in coherence times may require renewed attention to radiative backgrounds and experimental setup design, especially when introducing new material platforms.
Superconducting quantum circuits underpin large-scale quantum processors and are increasingly interfaced with optical systems, yet they are vulnerable to quasiparticle poisoning from high-energy radiation and optical fields. Gap engineering of Josephson junctions suppresses quasiparticle-induced relaxation, but quasiparticles near the junction can still shift the qubit frequency and cause phase errors. Here, we extend gap engineering beyond the junction using a flux-tunable transmon with a gold-on-niobium ground plane and island and strongly gap-engineered aluminum junctions designed to keep quasiparticles away from the junction leads. Compared with an all-aluminum transmon with nominally identical junctions, we demonstrate that the niobium device withstands more than an order of magnitude higher near-infrared optical power before excess relaxation appears. The Nb transmon shows no resolvable quasiparticle-induced frequency shift over the same power range. At the same time, we observe that dephasing and state-preparation-and-measurement infidelity increase with optical power even while relaxation remains protected. These results suggest that engineering the quasiparticle energy landscape beyond the junction can substantially increase qubit resilience, not only to radiation-induced error bursts, but also to nearby optical fields.
This dissertation describes energy dissipation and microwave loss due to non-equilibrium quasiparticles in superconducting transmon qubits and titanium nitride coplanar waveguide resonators. During the measurements of transmon T1 relaxation time and resonator quality factor QI, I observed reduced microwave loss as the temperature increased from 20 mK to approximately Tc/10 at which the loss takes on a minimum value. I argue that this effect is due to non-equilibrium quasiparticles. I measured the temperature dependence of the relaxation time T1 of the excited state of an Al/AlOx/Al transmon and found that, in some cases, T1 increased by almost a factor of two as the temperature increased from 30 mK to 100 mK with a best T1 of 0.2 ms. I present an argument showing this unexpected temperature dependence occurs due to the behavior of non-equilibrium quasiparticles in devices in which one electrode in the tunnel junction has a smaller volume, and slightly smaller superconducting energy gap, than the other electrode. At sufficiently low temperatures, non-equilibrium quasiparticles accumulate in the electrode with the smaller gap, leading to a relatively high density of quasiparticles at the junction and a short T1. Increasing the temperature gives the quasiparticles enough thermal energy to occupy the higher gap electrode, reducing the density at the junction and increasing T1. I present a model of this effect, extract the density of quasiparticles and the two superconducting energy gaps, and discuss implications for increasing the relaxation time of transmons. I also observed a similar phenomenon in low temperature microwave studies of titanium nitride coplanar waveguide resonators. I report on loss in a resonator at temperatures from 20 mK up to 1.1 K and with the application of infrared pair breaking radiation (λ=1.55 μm). With no applied IR light, the internal quality factor increased from QI = 800,000 at T < 70 mK up to QI=(2×10^6 ) at 600 mK. The resonant frequency f0 increased by 2 parts per million over the same temperature range. Above 600 mK both QI and f0 decreased rapidly, consistent with the increase in the density of thermally generated quasiparticles. With the application of IR light and for intensities below 1 aW μm^(-2) and T < 400 mK, QI increased in a similar way to increasing the temperature before beginning to decrease with larger intensities. I show that a model involving non-equilibrium quasiparticles and two regions of different superconducting gaps can explain this unexpected behavior.
The quasiparticle density observed in low-temperature superconducting circuits is several orders of magnitude larger than the value expected at thermal equilibrium. The tunneling of this excess of quasiparticles across Josephson junctions is recognized as one of the main loss and decoherence mechanisms in superconducting qubits. Here we present a unified impedance theory that accounts for quasiparticle energy loss in circuit regions both far from and near to (across) junctions. Our theory leverages the recent experimental demonstration that the excess quasiparticles are in quasiequilibrium [Connolly et al., Phys. Rev. Lett. 132, 217001 (2024)] and uses a generalized fluctuation-dissipation theorem to predict the amount of charge and flux noise generated by them. We compute the resulting energy relaxation time T1{T}_{1}T1​ in transmon qubits with and without junction asymmetric gap engineering, and show that quasiparticles residing away from junctions can play a dominant role in the former case. They also may provide an upper limit for resonator quality factors if the density of amorphous two-level systems is reduced. In addition, we show that charge noise from quasiparticles leads to flux noise that is logarithmic in frequency, giving rise to a ``nearly white'' contribution that is comparable to the flux noise observed in flux qubits. This contrasts with amorphous two-level systems, whose associated flux noise is shown to be super-Ohmic. We discuss how this quasiparticle flux noise can limit ${T}_{2}^{\ensuremath{\ast}}$ coherence times in flux-tunable qubits. The final conclusion is that asymmetric gap engineering can greatly reduce noise and increase coherence times in superconducting qubits.
The performance and scalability of superconducting quantum circuits depends critically on the microwave environment. Minimizing signal reflections and suppressing thermal noise are essential for achieving high-fidelity readout and preserving qubit coherence. A significant challenge arises from the use of conventional cryogenic components such as isolators and circulators, which exhibit nonideal out-of-band reflection characteristics. Reflections degrade impedance matching and limit the performance of broadband quantum limited amplifiers. Superconducting implementations of reflectionless microwave filters offer a promising solution to mitigate these issues. The focus of this work is the fabrication and cryogenic characterization of reflectionless filters compatible with superconducting qubit fabrication flows. Devices were implemented on high resistivity silicon substrates using aluminum ground planes, integrated nichrome resistors, and crossovers formed with SiO2 interlayer dielectric. Cryogenic measurements at 20 mK demonstrate high return loss, confirming the viability of these filters for co-fabrication with traveling-wave parametric amplifiers (TWPAs) and circuit quantum electrodynamics (cQED) architectures. The filters exhibit low insertion loss in the passband to maintain quantum measurement efficiency and provide broadband reflection suppression across frequencies relevant to superconducting qubits, offering a scalable way to manage microwave noise in superconducting quantum processors.