Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Heterodyne mixing performance of distributed nb superconducting junction arrays at 1.2 THz

Shen Xc, Weiwei Lu, J Zhang

Published Jan 1, 2006• 0 citations
OpenAlex

Abstract

In this paper we focus on the investigation of the heterodyne mixing performance of distributed Nb superconducting SIS junction arrays at 1.2 THz, which have individual SIS junctions uniformly distributed (connected in parallel) along a superconducting thin-film microstrip line.

Related papers

Heterodyne Mixing Performance of Distributed Nb Superconducting Junction Arrays at 1.2 THz

S.-C. Shi

In this paper we focus on the investigation of the heterodyne mixing performance of distributed Nb superconducting SIS junction arrays at 1.2 THz, which have individual SIS junctions uniformly distributed (connected in parallel) along a superconducting thin-film microstrip line.

International Conference on Infrared, Millimeter, and Terahertz Waves (IRMMW-THz)•Sep 1, 2006•0 citations

0.5-THz waveguide SIS mixers with NbN/AlN/NbN technology

Jing Li, Masanori Takeda, Zhen Wang +1 more

Heterodyne mixers based on superconducting SIS (superconductor-insulator-superconductor) tunnel junctions have been demonstrated to be the most sensitive coherent detectors at millimeter and submillimeter wavelengths. In fact, conventional superconducting SIS mixers with Nb/AlOx/Nb junction and Nb/SiO2/Nb tuning circuit have shown good performances with the noise temperature reaching as low as three times the quantum limit below 0.7THz, which is the gap frequency of Nb-based SIS junctions. However, due to the large loss in Nb thin-film superconducting microstrip lines, the noise performance of Nb SIS mixers deteriorates significantly above 0.7THz. With a gap frequency double that of Nb-based SIS junctions, NbN-based SIS junctions are of particular interest for the development of heterodyne mixers in the terahertz region. Considering the bandwidth and output power of local-oscillator (LO) signal sources are quite limited around 1THz, we firstly develop a waveguide NbN-based SIS mixer at 0.5THz. Three types of SIS junctions, i.e., long junction, parallel-connected tunnel junction (PCTJ) and distributed junction array (DJ) are investigated. They are all comprised of NbN-AlN-NbN tri-layer fabricated on an MgO substrate and have the same current density (Jc) of 10kA/cm2. In this paper, we describe their design, fabrication and preliminary experimental results.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Nov 29, 2007•3 citations

Experimental results of SIS mixers with distributed junction arrays

Sheng‐Cai Shi, Takashi Noguchi, Junji Inatani +2 more

The heterodyne mixing performance of three respective distributed junction arrays, i.e., a number of superconductor-insulator-superconductor (SIS) junctions distributed along a thin-film transmission line involving two, five, and ten junctions are measured and compared to their Fourier transform spectroscopy (FTS) detection responses. It has been found that distributed junction arrays have a rather large bandwidth in comparison to conventional SIS junction devices, while still keeping a quantum-limited noise performance. Detailed experimental results are presented.

IEEE Microwave and Guided Wave Letters•Jan 1, 1998•23 citations

Characterization of Nb-based superconducting microstrip lines around the gap frequency

Sheng-Cai Shi, Chi-Chung Chin, Wen Zhang

Submillimeter-wave SIS mixers usually adopt junctions associated with an integrated tuning circuit, which tunes out the junction's capacitance and is typically a thin-film superconducting microstrip line. This paper mainly investigates the characteristic of Nb-based superconducting microstrip lines around the junction's gap frequency and its effect on the performance of SIS mixers.

International Conference on Infrared, Millimeter, and Terahertz Waves (IRMMW-THz)•Nov 7, 2002•2 citations

0.5-THz waveguide SIS mixers with NbN/AlN/NbN technology - art. no. 684013

Jing Li, Takeda Masanon, Zhen Wang

Heterodyne mixers based on superconducting SIS (superconductor-insulator-superconductor) tunnel junctions have been demonstrated to be the most sensitive coherent detectors at millimeter and submillimeter wavelengths. In fact, conventional superconducting SIS mixers with Nb/AIO(x)/Nb junction and Nb/SiO2/Nb tuning circuit have shown good performances with the noise temperature reaching as low as three times the quantum limit below 0.7THz, which is the gap frequency of Nb-based SIS junctions. However, due to the large loss in Nb thin-film superconducting microstrip lines, the noise performance of Nb SIS mixers deteriorates significantly above 0.7THz. With a gap frequency double that of Nb-based SIS junctions, NbN-based SIS junctions are of particular interest for the development of heterodyne mixers in the terahertz region.

•Jan 1, 2008•0 citations

Development of SIS mixers for 1 THz

Jonas Stasys Zmuidzinas, J. Kooi, Jonathan H. Kawamura +4 more

SIS heterodyne mixer technology based on niobium tunnel junctions has now been pushed to frequencies over 1 THz, clearly demonstrating that the SIS junctions are capable of mixing at frequencies up to twice the energy gap frequency (4(Delta) /h). However, the performance degrades rapidly above the gap frequency of niobium (2(Delta) /h approximately equals 700 GHz) due to substantial ohmic losses in the on-chip tuning circuit. To solve this problem, the tuning circuit should be fabricated using a superconducting film with a larger energy gap, such as NbN; unfortunately, NbN films often have a substantial excess surface resistance in the submillimeter band. In contrast, the SIS mixer measurements we present in this paper indicate that the losses for NbTiN thin films can be quite low.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Jul 31, 1998•27 citations
Heterodyne mixers based on superconducting SIS (superconductor-insulator-superconductor) tunnel junctions have been demonstrated to be the most sensitive coherent detectors at millimeter and submillimeter wavelengths. In fact, conventional superconducting SIS mixers with Nb/AlOx/Nb junction and Nb/SiO2/Nb tuning circuit have shown good performances with the noise temperature reaching as low as three times the quantum limit below 0.7THz, which is the gap frequency of Nb-based SIS junctions. However, due to the large loss in Nb thin-film superconducting microstrip lines, the noise performance of Nb SIS mixers deteriorates significantly above 0.7THz. With a gap frequency double that of Nb-based SIS junctions, NbN-based SIS junctions are of particular interest for the development of heterodyne mixers in the terahertz region. Considering the bandwidth and output power of local-oscillator (LO) signal sources are quite limited around 1THz, we firstly develop a waveguide NbN-based SIS mixer at 0.5THz. Three types of SIS junctions, i.e., long junction, parallel-connected tunnel junction (PCTJ) and distributed junction array (DJ) are investigated. They are all comprised of NbN-AlN-NbN tri-layer fabricated on an MgO substrate and have the same current density (Jc) of 10kA/cm2. In this paper, we describe their design, fabrication and preliminary experimental results.
The heterodyne mixing performance of three respective distributed junction arrays, i.e., a number of superconductor-insulator-superconductor (SIS) junctions distributed along a thin-film transmission line involving two, five, and ten junctions are measured and compared to their Fourier transform spectroscopy (FTS) detection responses. It has been found that distributed junction arrays have a rather large bandwidth in comparison to conventional SIS junction devices, while still keeping a quantum-limited noise performance. Detailed experimental results are presented.
Heterodyne mixers based on superconducting SIS (superconductor-insulator-superconductor) tunnel junctions have been demonstrated to be the most sensitive coherent detectors at millimeter and submillimeter wavelengths. In fact, conventional superconducting SIS mixers with Nb/AIO(x)/Nb junction and Nb/SiO2/Nb tuning circuit have shown good performances with the noise temperature reaching as low as three times the quantum limit below 0.7THz, which is the gap frequency of Nb-based SIS junctions. However, due to the large loss in Nb thin-film superconducting microstrip lines, the noise performance of Nb SIS mixers deteriorates significantly above 0.7THz. With a gap frequency double that of Nb-based SIS junctions, NbN-based SIS junctions are of particular interest for the development of heterodyne mixers in the terahertz region.
SIS heterodyne mixer technology based on niobium tunnel junctions has now been pushed to frequencies over 1 THz, clearly demonstrating that the SIS junctions are capable of mixing at frequencies up to twice the energy gap frequency (4(Delta) /h). However, the performance degrades rapidly above the gap frequency of niobium (2(Delta) /h approximately equals 700 GHz) due to substantial ohmic losses in the on-chip tuning circuit. To solve this problem, the tuning circuit should be fabricated using a superconducting film with a larger energy gap, such as NbN; unfortunately, NbN films often have a substantial excess surface resistance in the submillimeter band. In contrast, the SIS mixer measurements we present in this paper indicate that the losses for NbTiN thin films can be quite low.