Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Demonstration of a SAIL superconductive digital circuit.

K. Yokoyama, S. Schwarzbek, Roger A. Davidheiser, Jerome A. Luine, N.J. Schneier

Published Dec 31, 1994• 0 citations
OpenAlex

Abstract

TRW is developing High Temperature Superconducting (HTS) electronics to dramatically improve the performance of space based communications systems. These systems demand high speed analog-to-digital converters, high speed digital multiplexers, and quadriphase modulation of rf carrier signals. TRW has demonstrated an HTS high-speed multiplexer and a digital phase modulator that operates at microwave frequencies. The latter is the fundamental building block of a Quadriphase Modulator Exciter (QME). TRW has also developed an HTS cryogenic packaging subsystem which uses a commercially available palm-sized cryocooler. This package represents the first demonstration of an HTS self supporting system. Package verification tests revealed that the package is capable of supporting high speed I/O and demonstrates reliable connectivity through multiple interfaces. The successful operation of a digital phase modulator has been demonstrated with this package.

Related papers

Demonstration of a series array interferometer logic (SAIL) superconductive digital circuit

Karen E. Yokoyama, S. Schwarzbek, Roger A. Davidheiser +2 more

TRW is developing High Temperature Superconducting (HTS) electronics to dramatically improve the performance of space- based communications systems. These systems demand high speed analog-to-digital converters, high speed digital multiplexers, and quadriphase modulation of rf carrier signals. TRW has demonstrated an HTS high-speed multiplexer and a digital phase modulator that operates at microwave frequencies. The latter is the fundamental building block of a Quadriphase Modulator Exciter (QME). TRW has also developed an HTS cryogenic packaging subsystem which uses a commercially available palm-sized cryocooler. This package represents the first demonstration of an HTS self-supporting system. Package verification tests revealed that the package is capable of supporting high speed I/O and demonstrates reliable connectivity through multiple interfaces. The successful operation of a digital phase modulator has been demonstrated with this package.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Jul 2, 1994•0 citations

Superconductor Digital-RF Receiver Systems

Oleg A. Mukhanov, Dmitri E. Kirichenko, I. V. Vernik +12 more

Digital superconductor electronics has been experiencing rapid maturation with the emergence of smaller-scale, lower-cost communications applications which became the major technology drivers. These applications are primarily in the area of wireless communications, radar, and surveillance as well as in imaging and sensor systems. In these areas, the fundamental advantages of superconductivity translate into system benefits through novel Digital-RF architectures with direct digitization of wide band, high frequency radio frequency (RF) signals. At the same time the availability of relatively small 4K cryocoolers has lowered the foremost market barrier for cryogenically-cooled digital electronic systems. Recently, we have achieved a major breakthrough in the development, demonstration, and successful delivery of the cryocooled superconductor digital-RF receivers directly digitizing signals in a broad range from kilohertz to gigahertz. These essentially hybrid-technology systems combine a variety of superconductor and semiconductor technologies packaged with two-stage commercial cryocoolers: cryogenic Nb mixed-signal and digital circuits based on Rapid Single Flux Quantum (RSFQ) technology, room-temperature amplifiers, FPGA processing and control circuitry. The demonstrated cryocooled digital-RF systems are the world's first and fastest directly digitizing receivers operating with live satellite signals in X-band and performing signal acquisition in HF to L-band at ∼30GHz clock frequencies.

IEICE Transactions on Electronics•Mar 1, 2008•130 citations

Analogue demonstration of a high temperature superconducting sigma-delta modulator with 27 GHz sampling

Martin G. Forrester, B. D. Hunt, Donald L. Miller +2 more

We have successfully fabricated and tested a high temperature superconducting (HTS) sigma-delta modulator for analogue-to-digital conversion. This is the first demonstration of a GHz sampling A-to-D in HTS. The 15-junction single-flux-quantum (SFQ) circuit, fabricated using an epitaxial multilayer HTS process with YBCO/Co-YBCO/YBCO edge junctions, was internally clocked at 27 GHz and used to convert a 5.01 MHz signal. The modulator demonstrated a spur-free dynamic range of more than 75 dB. Two-tone measurements with 5.01 MHz and 5.51 MHz signals demonstrated third-order intermodulation products to be lower than -59 dBc. Demonstration of a functional HTS modulator represents a significant milestone in the development of high dynamic range ADCs suitable for such applications as surveillance radar.

Superconductor Science and Technology•Nov 1, 1999•11 citations

Operation of SAIL HTS digital circuits near 1 GHz

S. Schwarzbek, Karen E. Yokoyama, D.J. Durand +1 more

Using Series Array Interferometer Logic (SAIL) components, we have demonstrated an HTS gate driving an exclusive OR, whose second input is being driven at 1 GHz. This digital technique serves as an output interface: data is placed on an rf carrier as phase information (Phase Shift Keying). Low voltage, baseband, differential data can be amplified by low noise, narrow bandwidth, single-ended amplifiers. A simple demodulator completes the connection to standard semiconductor electronics.>

IEEE Transactions on Applied Superconductivity•Jun 1, 1995•5 citations

Integration of cryocooled superconducting analog-to-digital converter and SiGe output amplifier

Deepnarayan Gupta, Alan M. Kadin, R.J. Webber +8 more

HYPRES is developing a prototype digital system comprising a Nb RSFQ analog-to-digital converter (ADC) and SiGe amplifiers on a commercial two-stage cryocooler. This involves the detailed thermal, electrical, and mechanical design of the ADC chip mount, input/output (I/O) cables, and electromagnetic shielding. Our objective is to minimize the heat load on the second (4 K) stage of the cryocooler, in order to ensure stable ADC operation. The design incorporates thermal radiation shields and magnetic shielding for the RSFQ circuit. For the I/O cables, the thermal design must be balanced against the acceptable attenuation of RF lines and resistance of DC bias lines. SiGe heterojunction bipolar transistor (HBT) signal conditioning circuits, placed on the first (60 K) stage of the cryocooler, will amplify the mV-level ADC outputs to V-level (e.g., ECL) outputs for seamless transition to room-temperature electronics. Cooling these HBT circuits lowers noise and improves their high-frequency performance. Demonstration of this prototype should lead the way to commercialization of high-speed digital superconducting systems, for such applications as wireless communication, radars, and switching networks.

IEEE Transactions on Applied Superconductivity•Jun 1, 2003•25 citations

Superconductive electronics-a high speed and low power technology complementing III-V technologies for advanced systems

Michael Leung, J.W. Spargo, Kevin W. Kobayashi +1 more

Superconductive electronics offers a unique combination of high bandwidth and low power for mission critical hardware such as digital processors at 20 to 100 GHz, microwatt per bit analog to digital converters, large digital switches at multi-Gb/s data rates, and low noise parametric amplifiers. This cryogenic technology, typically operating at a few degrees or a few tens of degrees Kelvin, depends upon the unique physics of superconducting materials such as Nb, NbN, and YBaCuO, and the fundamental circuit element, the Josephson junction (JJ) to create unique architectures of unprecedented design efficiency and performance. These circuits are based on the single flux quantum (SFQ) logic family, a technology that has no parallel in semiconductor electronics. Digital data is transmitted by voltage pulses with amplitude less than 1 mV, but at extremely high speeds. Individual gates have been operated as high as 370 GHz. In this paper, we present a brief overview of superconductive digital technology, describe some recent circuits, and discuss how the challenges to superconductive technology are being met, including the use of multi-chip module (MCM) technology, and the potential use of III-V HBT and HEMT circuits to provide interface drivers and amplifiers, possibly operated cryogenically.

Technical digest -- IEEE Compound Semiconductor Integrated Circuit Symposium•Nov 23, 2002•1 citation
TRW is developing High Temperature Superconducting (HTS) electronics to dramatically improve the performance of space based communications systems. These systems demand high speed analog-to-digital converters, high speed digital multiplexers, and quadriphase modulation of rf carrier signals. TRW has demonstrated an HTS high-speed multiplexer and a digital phase modulator that operates at microwave frequencies. The latter is the fundamental building block of a Quadriphase Modulator Exciter (QME). TRW has also developed an HTS cryogenic packaging subsystem which uses a commercially available palm-sized cryocooler. This package represents the first demonstration of an HTS self supporting system. Package verification tests revealed that the package is capable of supporting high speed I/O and demonstrates reliable connectivity through multiple interfaces. The successful operation of a digital phase modulator has been demonstrated with this package.
TRW is developing High Temperature Superconducting (HTS) electronics to dramatically improve the performance of space- based communications systems. These systems demand high speed analog-to-digital converters, high speed digital multiplexers, and quadriphase modulation of rf carrier signals. TRW has demonstrated an HTS high-speed multiplexer and a digital phase modulator that operates at microwave frequencies. The latter is the fundamental building block of a Quadriphase Modulator Exciter (QME). TRW has also developed an HTS cryogenic packaging subsystem which uses a commercially available palm-sized cryocooler. This package represents the first demonstration of an HTS self-supporting system. Package verification tests revealed that the package is capable of supporting high speed I/O and demonstrates reliable connectivity through multiple interfaces. The successful operation of a digital phase modulator has been demonstrated with this package.
Digital superconductor electronics has been experiencing rapid maturation with the emergence of smaller-scale, lower-cost communications applications which became the major technology drivers. These applications are primarily in the area of wireless communications, radar, and surveillance as well as in imaging and sensor systems. In these areas, the fundamental advantages of superconductivity translate into system benefits through novel Digital-RF architectures with direct digitization of wide band, high frequency radio frequency (RF) signals. At the same time the availability of relatively small 4K cryocoolers has lowered the foremost market barrier for cryogenically-cooled digital electronic systems. Recently, we have achieved a major breakthrough in the development, demonstration, and successful delivery of the cryocooled superconductor digital-RF receivers directly digitizing signals in a broad range from kilohertz to gigahertz. These essentially hybrid-technology systems combine a variety of superconductor and semiconductor technologies packaged with two-stage commercial cryocoolers: cryogenic Nb mixed-signal and digital circuits based on Rapid Single Flux Quantum (RSFQ) technology, room-temperature amplifiers, FPGA processing and control circuitry. The demonstrated cryocooled digital-RF systems are the world's first and fastest directly digitizing receivers operating with live satellite signals in X-band and performing signal acquisition in HF to L-band at ∼30GHz clock frequencies.
We have successfully fabricated and tested a high temperature superconducting (HTS) sigma-delta modulator for analogue-to-digital conversion. This is the first demonstration of a GHz sampling A-to-D in HTS. The 15-junction single-flux-quantum (SFQ) circuit, fabricated using an epitaxial multilayer HTS process with YBCO/Co-YBCO/YBCO edge junctions, was internally clocked at 27 GHz and used to convert a 5.01 MHz signal. The modulator demonstrated a spur-free dynamic range of more than 75 dB. Two-tone measurements with 5.01 MHz and 5.51 MHz signals demonstrated third-order intermodulation products to be lower than -59 dBc. Demonstration of a functional HTS modulator represents a significant milestone in the development of high dynamic range ADCs suitable for such applications as surveillance radar.
HYPRES is developing a prototype digital system comprising a Nb RSFQ analog-to-digital converter (ADC) and SiGe amplifiers on a commercial two-stage cryocooler. This involves the detailed thermal, electrical, and mechanical design of the ADC chip mount, input/output (I/O) cables, and electromagnetic shielding. Our objective is to minimize the heat load on the second (4 K) stage of the cryocooler, in order to ensure stable ADC operation. The design incorporates thermal radiation shields and magnetic shielding for the RSFQ circuit. For the I/O cables, the thermal design must be balanced against the acceptable attenuation of RF lines and resistance of DC bias lines. SiGe heterojunction bipolar transistor (HBT) signal conditioning circuits, placed on the first (60 K) stage of the cryocooler, will amplify the mV-level ADC outputs to V-level (e.g., ECL) outputs for seamless transition to room-temperature electronics. Cooling these HBT circuits lowers noise and improves their high-frequency performance. Demonstration of this prototype should lead the way to commercialization of high-speed digital superconducting systems, for such applications as wireless communication, radars, and switching networks.
Superconductive electronics offers a unique combination of high bandwidth and low power for mission critical hardware such as digital processors at 20 to 100 GHz, microwatt per bit analog to digital converters, large digital switches at multi-Gb/s data rates, and low noise parametric amplifiers. This cryogenic technology, typically operating at a few degrees or a few tens of degrees Kelvin, depends upon the unique physics of superconducting materials such as Nb, NbN, and YBaCuO, and the fundamental circuit element, the Josephson junction (JJ) to create unique architectures of unprecedented design efficiency and performance. These circuits are based on the single flux quantum (SFQ) logic family, a technology that has no parallel in semiconductor electronics. Digital data is transmitted by voltage pulses with amplitude less than 1 mV, but at extremely high speeds. Individual gates have been operated as high as 370 GHz. In this paper, we present a brief overview of superconductive digital technology, describe some recent circuits, and discuss how the challenges to superconductive technology are being met, including the use of multi-chip module (MCM) technology, and the potential use of III-V HBT and HEMT circuits to provide interface drivers and amplifiers, possibly operated cryogenically.