We provide the first constructions of a new family of error-correcting codes called “energy-adaptive codes.” These codes are designed to enable adaptive circuit implementations that minimize the total system-level energy based on varying distances and target error probabilities. Recent work has explored fundamental limits and practical strategies for minimizing total (transmit + circuit) power, considering both power consumed in computational nodes as well as wires in the circuit. It is now established that to minimize total power, code choice and circuit-design should change with communication distances and/or target error probability. Motivated by circuit area constraints, the energy-adaptive codes adapt energy consumption as distances and/or target error probability change. These codes shrink and expand the wiring area they occupy as demands on the system change, adjusting the hardware by turning on and off non-local wires in the circuit. The code constructions are hierarchical, and use QC-LDPC codes as the basis. We estimate the decoding power savings attained by use of these codes through simulation results. Such codes can be of increasing utility as we enter the era of 1000 devices per person where designing the skilled labor for obtaining optimized designs for each system will simply be unavailable. While our first constructions are admittedly simplistic, the goal of the paper is to bring this new problem to the attention of the coding-theory community.
We provide the first constructions of a new family of error-correcting codes called “energy-adaptive codes.” These codes are designed to enable adaptive circuit implementations that minimize the total system-level energy based on varying distances and target error probabilities. Recent work has explored fundamental limits and practical strategies for minimizing total (transmit + circuit) power, considering both power consumed in computational nodes as well as wires in the circuit. It is now established that to minimize total power, code choice and circuit-design should change with communication distances and/or target error probability. Motivated by circuit area constraints, the energy-adaptive codes adapt energy consumption as distances and/or target error probability change. These codes shrink and expand the wiring area they occupy as demands on the system change, adjusting the hardware by turning on and off non-local wires in the circuit. The code constructions are hierarchical, and use QC-LDPC codes as the basis. We estimate the decoding power savings attained by use of these codes through simulation results. Such codes can be of increasing utility as we enter the era of 1000 devices per person where designing the skilled labor for obtaining optimized designs for each system will simply be unavailable. While our first constructions are admittedly simplistic, the goal of the paper is to bring this new problem to the attention of the coding-theory community.
Low-density parity-check (LDPC) codes have been shown to have good error correcting performance approaching Shannon’s limit. Good error correcting performance enables efficient and reliable communication. However, a LDPC code decoding algorithm needs to be executed efficiently to meet cost, time, power and bandwidth requirements of target applications. The constructed codes should also meet error rate performance requirements of those applications. Since their rediscovery, there has been much research work on LDPC code construction and implementation. LDPC codes can be designed over a wide space with parameters such as girth, rate and length. There is no unique method of constructing LDPC codes. Existing construction methods are limited in some way in producing good error correcting performing and easily implementable codes for a given rate and length. There is a need to develop methods of constructing codes over a wide range of rates and lengths with good performance and ease of hardware implementability. LDPC code hardware design and implementation depend on the structure of target LDPC code and is also as varied as LDPC matrix designs and constructions. There are several factors to be considered including decoding algorithm computations,processing nodes interconnection network, number of processing nodes, amount of memory, number of quantization bits and decoding delay. All of these issues can be handled in several different ways. \nThis thesis is about construction of LDPC codes and their hardware implementation. LDPC code construction and implementation issues mentioned above are too many to be addressed in one thesis. The main contribution of this thesis is the development of LDPC code construction methods for some classes of structured LDPC codes and techniques for reducing decoding time. We introduce two main methods for constructing structured codes. In the first method, column-weight two LDPC codes are derived from distance graphs. A wide range of girths, rates and lengths are obtained compared to existing methods. The performance and implementation complexity of obtained codes depends on the structure of their corresponding distance graphs. In the second method, a search algorithm based on bit-filing and progressive-edge growth algorithms is introduced for constructing quasi-cyclic LDPC codes. The algorithm can be used to form a distance or Tanner graph of a code. This method could also obtain codes over a wide range of parameters. Cycles of length four are avoided by observing the row-column constraint. \nRow-column connections observing this condition are searched sequentially or randomly. Although the girth conditions are not sufficient beyond six, larger girths codes were easily obtained especially at low rates. The advantage of this algorithm compared to other methods is its flexibility. It could be used to construct codes for a given rate and length with girths of at least six for any sub-matrix configuration or rearrangement. The code size is also easily varied by increasing or decreasing sub-matrix size. Codes obtained using a sequential search criteria show poor performance at low girths (6 and 8) while random searches result in good performing codes. \nQuasi-cyclic codes could be implemented in a variety of decoder architectures. One of the many options is the choice of processing nodes interconnect. We show how quasi-cyclic codes processing could be scheduled through a multistage network. Although these net-works have more delay than other modes of communication, they offer more flexibility at a reasonable cost. Banyan and Benes networks are suggested as the most suitable networks. \nDecoding delay is also one of several issues considered in decoder design and implementation. In this thesis, we overlap check and variable node computations to reduce decoding time. Three techniques are discussed, two of which are introduced in this thesis. The techniques are code matrix permutation, matrix space restriction and sub-matrix row-column scheduling. Matrix permutation rearranges the parity-check matrix such that rows and columns that do not have connections in common are separated. This techniques can be applied to any matrix. Its effectiveness largely depends on the structure of the code. We show that its success also depends on the size of row and column weights. Matrix space restriction is another technique that can be applied to any code and has fixed reduction in time or amount of overlap. Its success depends on the amount of restriction and may be traded with performance loss. The third technique already suggested in literature relies on the internal cyclic structure of sub-matrices to achieve overlapping. The technique is limited to LDPC code matrices in which the number of sub-matrices is equal to row and column weights. We show that it can be applied to other codes with a lager number of sub-matrices than code weights. However, in this case maximum overlap is not guaranteed. We calculate the lower bound on the amount of overlapping. Overlapping could be applied to any sub-matrix configuration of quasi-cyclic codes by arbitrarily choosing \nthe starting rows for processing. Overlapping decoding time depends on inter-iteration waiting times. We show that there are upper bounds on waiting times which depend on the code weights. Waiting times could be further reduced by restricting shifts in identity sub-matrices or using smaller sub-matrices. This overlapping technique can reduce the decoding time by up to 50% compared to conventional message and computation scheduling. \nTechniques of matrix permutation and space restriction results in decoder architectures that are flexible in LDPC code design in terms of code weights and size. This is due to the fact that with these techniques, rows and columns are processed in sequential order to achieve overlapping. However, in the existing technique, all sub-matrices have to be processed in parallel to achieve overlapping. Parallel processing of all code sub-matrices requires the architecture to have the number of processing units at least equal to the number sub-matrices. Processing units and memory space should therefore be distributed among the sub-matrices according to the sub-matrices arrangement. This leads to high complexity or inflexibility in the decoder architecture. We propose a simple, programmable and high throughput decoder architecture based on matrix permutation and space restriction techniques.
Binary Low-Density Parity-Check (LDPC) codes are a type of error correction code known to exhibit excellent error-correcting capabilities, and have increasingly been applied as the forward error correction solution in a multitude of systems and standards, such as wireless communications, wireline communications, and data storage systems. In the pursuit of codes with even higher coding gain, non-binary LDPC (NB-LDPC) codes defined over a Galois field of order q have risen as a strong replacement candidate. For codes defined with similar rate and length, NB-LDPC codes exhibit a significant coding gain improvement relative to that of their binary counterparts.Unfortunately, NB-LDPC codes are currently limited from practical application by the immense complexity of their decoding algorithms, because the improved error-rate performance of higher field orders comes at the cost of increasing decoding algorithm complexity. Currently available ASIC implementation solutions for NB-LDPC code decoders are simultaneously low in throughput and power-hungry, leading to a low energy efficiency.We propose several techniques at the algorithm level as well as hardware architecture level in an attempt to bring NB-LDPC codes closer to practical deployment. On the algorithm side, we propose several algorithmic modifications and analyze the corresponding hardware cost alleviation as well as impact on coding gain. We also study the quantization scheme for NB-LDPC decoders, again in the context of both the hardware and coding gain impacts, and we propose a technique that enables a good tradeoff in this space. On the hardware side, we develop a FPGA-based NB-LDPC decoder platform for architecture prototyping as well as hardware acceleration of code evaluation via error rate simulations. We also discuss the architectural techniques and innovations corresponding to our proposed algorithm for optimization of the implementation. Finally, a proof-of-concept ASIC chip is realized that integrates many of the proposed techniques. We are able to achieve a 3.7x improvement in the information throughput and 23.8x improvement in the energy efficiency over prior state-of-the-art, without sacrificing the strong error correcting capabilities of the NB-LDPC code.
This paper investigates adaptive optimization techniques for quantum error correction (QEC) codes. The core claim is that dynamic adjustment of QEC parameters, guided by estimates of decoherence probabilities, can significantly enhance the efficiency of quantum information transmission. The proposed mechanism utilizes real-time adjustments to the code's redundancy, encoding scheme, and error correction protocols, adapting to varying noise environments and qubit states. Traditional QEC approaches typically employ fixed parameters, lacking the crucial element of adaptability. This research addresses this limitation by introducing a framework for continuous optimization based on accurate decoherence probability assessment. The framework involves estimating the decoherence probability (Pd) of individual qubits, which is then used to dynamically modify key parameters of the QEC code. Specifically, we explore adjusting the code rate (R), the minimum distance (d) of the code, and the choice of error correction scheme. The optimization algorithm aims to minimize the overall error rate while maintaining a desired level of performance. This work presents a novel approach to QEC, promising improved robustness and efficiency in quantum communication and computation. The key mathematical components of this work are presented below.
In this work, we introduce a new hardware architecture for decoding correlated errors in quantum LDPC codes. The decoder is based on message passing and exploits the structure of the detector error model obtained through the recently introduced Graph Augmentation and Rewiring for Inference (GARI) method. The proposed architecture enables flexible scaling and can, in principle, adapt to any quantum LDPC codes using the GARI framework. It leverages resource reuse while maintaining a modest degree of parallelism, thereby reducing power consumption and area requirements, while preserving low decoding latency.
As a case study, the architecture was implemented on a VCU19P FPGA as an ensemble of three decoder cores targeting the [[144,12,12]] bivariate bicycle code, achieving an average latency of 596 ns per decoding round. This implementation consumes six times fewer resources than the previous GARI-based proposal, being the first reported implementation of multiple decoder cores for correlated errors on a single FPGA device. This enables better energy-conscious scaling of the quantum error correction layer on the classical side, reducing overall power consumption while meeting real-time constraints without compromising decoding accuracy under correlated errors.
In this digital era, modern communication systems play an essential part in nearly every aspect of life, with examples ranging from mobile networks and satellite communications to Internet and data transfer. Unfortunately, all communication systems in a practical setting are noisy, which indicates that we can either improve the physical characteristics of the channel or find a possible systematical solution, i.e. error control coding. The history of error control coding dates back to 1948 when Claude Shannon published his celebrated work “A Mathematical Theory of Communication”, which built a framework for channel coding, source coding and information theory. For the first time, we saw evidence for the existence of channel codes, which enable reliable communication as long as the information rate of the code does not surpass the so-called channel capacity. Nevertheless, in the following 60 years none of the codes have been proven closely to approach the theoretical bound until the arrival of turbo codes and the renaissance of LDPC codes. As a strong contender of turbo codes, the advantages of LDPC codes include parallel implementation of decoding algorithms and, more crucially, graphical construction of codes. However, there are also some drawbacks to LDPC codes, e.g. significant performance degradation due to the presence of short cycles or very high decoding latency. In this thesis, we will focus on the practical realisation of finite-length LDPC codes and devise algorithms to tackle those issues. \n \nFirstly, rate-compatible (RC) LDPC codes with short/moderate block lengths are investigated on the basis of optimising the graphical structure of the tanner graph (TG), in order to achieve a variety of code rates (0.1 < R < 0.9) by only using a single encoder-decoder pair. As is widely recognised in the literature, the presence of short cycles considerably reduces the overall performance of LDPC codes which significantly limits their application in communication systems. To reduce the impact of short cycles effectively for different code rates, algorithms for counting short cycles and a graph-related metric called Extrinsic Message Degree (EMD) are applied with the development of the proposed puncturing and extension techniques. A complete set of simulations are carried out to demonstrate that the proposed RC designs can largely minimise the performance loss caused by puncturing or extension. \n \nSecondly, at the decoding end, we study novel decoding strategies which compensate for the negative effect of short cycles by reweighting part of the extrinsic messages exchanged between the nodes of a TG. The proposed reweighted belief propagation (BP) algorithms aim to implement efficient decoding, i.e. accurate signal reconstruction and low decoding latency, for LDPC codes via various design methods. A variable factor appearance probability belief propagation (VFAP-BP) algorithm is proposed along with an improved version called a locally-optimized reweighted (LOW)-BP algorithm, both of which can be employed to enhance decoding performance significantly for regular and irregular LDPC codes. More importantly, the optimisation of reweighting parameters only takes place in an offline stage so that no additional computational complexity is required during the real-time decoding process. \n \nLastly, two iterative detection and decoding (IDD) receivers are presented for multiple-input multiple-output (MIMO) systems operating in a spatial multiplexing configuration. QR decomposition (QRD)-type IDD receivers utilise the proposed multiple-feedback (MF)-QRD or variable-M (VM)-QRD detection algorithm with a standard BP decoding algorithm, while knowledge-aided (KA)-type receivers are equipped with a simple soft parallel interference cancellation (PIC) detector and the proposed reweighted BP decoders. In the uncoded scenario, the proposed MF-QRD and VM-QRD algorithms are shown to approach optimal performance, yet require a reduced computational complexity. In the LDPC-coded scenario, simulation results have illustrated that the proposed QRD-type IDD receivers can offer near-optimal performance after a small number of detection/decoding iterations and the proposed KA-type IDD receivers significantly outperform receivers using alternative decoding algorithms, while requiring similar decoding complexity.
Digital communication has become part of most applications we use today.It could be for internet access using WLAN/WiMAX technology or satellite based Digital Video Broadcasting (DVB) or even mobile applications.It may be possible to achieve very high communication bandwidth for these applications.But the problem is with the reliability of information received over the communication channel that is often subjected to noise.The obvious solution to this problem is incorporating error correction techniques in the communication system to correct the errors introduced during transit.One of the best performing error correction codes are Low-Density Parity-Check (LDPC) codes discovered by Gallager in 1962, but these codes only gained popularity over the last decade or so.LDPC codes can achieve excellent bit error rate (BER) performance and are very suitable for next-generation communication systems.Studies have shown that large LDPC codes can achieve BER performance very close to the Shannon Limit.Hence these codes are of paramount interest among the research community.However, practical implementation of high performance LDPC decoders with large code lengths is a challenge faced by designers today due to the huge complexity and hardware resources required.This research aims to reduce the complexity of LDPC decoding algorithms and explore resource efficient architectures for hardware implementation.LDPC decoders are primarily based on iterative algorithms and typically consist of large number of computational nodes, with complex interconnections among the nodes.A fully-parallel implementation of LDPC decoder with large code length can provide high throughput, but is costly in terms of hardware resources required.Even today's high-end FPGAs