Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE International Superconductive Electronics Conference (ISEC)

A 4-Bit Bit-Slice Multiplier for a 32-Bit RSFQ Microprocessor

Guang-Ming Tang, Kazuyoshi Takagi, Naofumi Takagi

Published Jul 1, 2015• 2 citations
Publisher

Abstract

A 4-bit bit-slice multiplier for a 32-bit rapid single-flux-quantum (RSFQ) microprocessor is proposed. It carries out both signed and unsigned integer multiplication. A fully pipelined RSFQ logic design of the multiplier using concurrent flow clocking consists of 33 stages and 17,551 Josephson junctions. The bit-slice approach simplifies the circuit complexity and reduces the hardware cost. For verification, an 8×8-bit 4-bit bit-slice multiplier based on the proposed algorithm has been designed and simulated using AIST 10-kA/cm21.0-μm fabrication technology. The simulation result shows correct operation at 62.5 GHz.

DOI
10.1109/isec.2015.7383428

Related papers

32 × 32-Bit 4-Bit Bit-Slice Integer Multiplier for RSFQ Microprocessors

Guang-Ming Tang, Kazuyoshi Takagi, Naofumi Takagi

A design of a 32 × 32-bit 4-bit bit-slice integer multiplier for rapid single-flux quantum microprocessors is shown. The multiplier carries out both signed and unsigned multiplication. It is designed with synchronous concurrent-flow clocking and target frequency of 50 GHz using the AIST 1.0-μm Nb/AlOx/Nb, nine-layer advanced process 2 fabrication technology with a critical current density of 10 kA/cm2. It consists of 56 885 Josephson junctions. The area is 12.00 × 6.65 mm2. The simulation results show correct operation with frequency of 50 GHz at the dc bias voltage of 2.5 mV. The throughput is 3.125 × 109multiplications per second.

IEEE Transactions on Applied Superconductivity•Feb 1, 2017•15 citations

RSFQ 4-bit Bit-Slice Integer Multiplier

Guang-Ming Tang, Kazuyoshi Takagi, Naofumi Takagi

A rapid single-flux-quantum (RSFQ) 4-bit bit-slice multiplier is proposed. A new systolic-like multiplication algorithm suitable for RSFQ implementation is developed. The multiplier is designed using the cell library for AIST 10-kA/cm2 1.0-μm fabrication technology (ADP2). Concurrent flow clocking is used to design a fully pipelined RSFQ logic design. A 4n x 4n-bit multiplier consists of 2n + 17 stages. For verifying the algorithm and the logic design, a physical layout of the 8 x 8-bit multiplier has been designed with target operating frequency of 50 GHz and simulated. It consists of 21 stages and 11, 488 Josephson junctions. The simulation results show correct operation up to 62.5 GHz.

IEICE Transactions on Electronics•Jan 1, 2016•12 citations

32-Bit 4 × 4 Bit-Slice RSFQ Matrix Multiplier

Guang-Ming Tang, Pei-Yao Qu, Xiaochun Ye +2 more

A 32-bit 4 × 4 bit-slice rapid single-flux-quantum (RSFQ) matrix multiplier is proposed. The multiplier mainly consists of bit-slice multipliers and bit-slice adders. The multiplication of unsigned integer matrices is implemented by control signals. The matrix multiplier used synchronous concurrent-flow clocking. The results show that a 16-bit bit-slice processing has the least latency at 10 GHz.

IEEE Transactions on Applied Superconductivity•May 18, 2018•8 citations

4-bit Bit-Slice Arithmetic Logic Unit for 32-bit RSFQ Microprocessors

Guang-Ming Tang, Takata Kensuke, Masamitsu Tanaka +3 more

A 4-bit bit-slice arithmetic logic unit (ALU) for 32-bit rapid single-flux-quantum microprocessors was demonstrated. The proposed ALU covers all of the ALU operations for the MIPS32 instruction set. It processes bit-sliced 32-bit data that are divided into eight slices of 4 bits. The bit-slice approach simplifies the circuit structure and reduces the hardware cost. The ALU uses synchronous concurrent-flow clocking and consists of eight pipeline stages. It was implemented using the 1.0-μm Nb/AlOx/Nb nine-layer advanced process 2 (ADP2) with a critical current density of 10 kA/cm2, and fabricated by National Institute of Advanced Industrial Science and Technology (AIST). It consists of 3481 Josephson junctions with an area of 3.09 × 1.66 mm2. It achieved the target frequency of 50 GHz and a latency of 524 ps for a 32-bit operation, at the designed DC bias voltage of 2.5 mV, via precise control of interconnect delays and clock distribution. Furthermore, it achieved a throughput of 6.25 × 10932-bit operations per second. All the correct ALU operations with measured DC bias voltage margins of around 10% at 50 GHz were successfully obtained. The proposed ALU can be used for any 4n-bit processing.

IEEE Transactions on Applied Superconductivity•Dec 10, 2015•64 citations

Logic Design of a 16-bit Bit-Slice Shifter for 64-bit RSFQ Microprocessors

Wei Xuan, Guang-Ming Tang, Pei-Yao Qu +5 more

Logic design of a 16-bit bit-slice shifter for 64-bit superconducting rapid single-flux-quantum (RSFQ) microprocessors is proposed. The shifter supports three types of shift operations including logic shift, arithmetic shift and rotating shift. Each of 64-bit shift input operands is divided into four slices of 16-bit each. In order to simulate the digital function and timing of the proposed 16-bit bit-slice shifter, we design a logic-level simulation model based on the Open Dataset of CONNECT Cell Library for AIST ADP2. As the results of simulation, the information of RSFQ circuits, such as the number of Josephson junctions, area and latency of the 16-bit bit slice shifter can be obtained. The simulation results show that the proposed 16-bit bit-slice shifter can work correctly.

IEEE International Superconductive Electronics Conference (ISEC)•Jul 1, 2019•3 citations

RSFQ arithmetic blocks for DSP applications

Stanislav V. Polonsky, J.C. Lin, Alexander V. Rylyakov

We have designed a Rapid Single-Flux-Quantum (RSFQ) bit-serial real-time pipeline multiplier for digital signal processing (DSP) applications. A single-bit module of this multiplier consists of 96 Josephson junctions and uses a B-flip-flop-based carry-save adder (CSA). For HYPRES' standard 1-kA/cm/sup 2/ Nb process with 3.5 /spl mu/m-diameter Josephson junctions the module occupies all area of 350/spl times/600 /spl mu/m/sup 2/. Simulations show that the circuit should dissipate 28 /spl mu/W of power at 2.6 mV dc supply voltage and operate at frequencies of up to 25 GHz. We have successfully tested all cells of the module and verified correct operation of a simplified version of the module at low frequencies. According to numerical simulations, the speed of the multiplier is limited by the CSA. In order to overcome this bottleneck we have developed a concept of a fast carry-save pipeline adder based on XOR gates which uses an RSFQ-specific algorithm for carry bit calculation.>

IEEE Transactions on Applied Superconductivity•Jun 1, 1995•28 citations
A 4-bit bit-slice multiplier for a 32-bit rapid single-flux-quantum (RSFQ) microprocessor is proposed. It carries out both signed and unsigned integer multiplication. A fully pipelined RSFQ logic design of the multiplier using concurrent flow clocking consists of 33 stages and 17,551 Josephson junctions. The bit-slice approach simplifies the circuit complexity and reduces the hardware cost. For verification, an 8×8-bit 4-bit bit-slice multiplier based on the proposed algorithm has been designed and simulated using AIST 10-kA/cm21.0-μm fabrication technology. The simulation result shows correct operation at 62.5 GHz.
A design of a 32 × 32-bit 4-bit bit-slice integer multiplier for rapid single-flux quantum microprocessors is shown. The multiplier carries out both signed and unsigned multiplication. It is designed with synchronous concurrent-flow clocking and target frequency of 50 GHz using the AIST 1.0-μm Nb/AlOx/Nb, nine-layer advanced process 2 fabrication technology with a critical current density of 10 kA/cm2. It consists of 56 885 Josephson junctions. The area is 12.00 × 6.65 mm2. The simulation results show correct operation with frequency of 50 GHz at the dc bias voltage of 2.5 mV. The throughput is 3.125 × 109multiplications per second.
A rapid single-flux-quantum (RSFQ) 4-bit bit-slice multiplier is proposed. A new systolic-like multiplication algorithm suitable for RSFQ implementation is developed. The multiplier is designed using the cell library for AIST 10-kA/cm2 1.0-μm fabrication technology (ADP2). Concurrent flow clocking is used to design a fully pipelined RSFQ logic design. A 4n x 4n-bit multiplier consists of 2n + 17 stages. For verifying the algorithm and the logic design, a physical layout of the 8 x 8-bit multiplier has been designed with target operating frequency of 50 GHz and simulated. It consists of 21 stages and 11, 488 Josephson junctions. The simulation results show correct operation up to 62.5 GHz.
A 4-bit bit-slice arithmetic logic unit (ALU) for 32-bit rapid single-flux-quantum microprocessors was demonstrated. The proposed ALU covers all of the ALU operations for the MIPS32 instruction set. It processes bit-sliced 32-bit data that are divided into eight slices of 4 bits. The bit-slice approach simplifies the circuit structure and reduces the hardware cost. The ALU uses synchronous concurrent-flow clocking and consists of eight pipeline stages. It was implemented using the 1.0-μm Nb/AlOx/Nb nine-layer advanced process 2 (ADP2) with a critical current density of 10 kA/cm2, and fabricated by National Institute of Advanced Industrial Science and Technology (AIST). It consists of 3481 Josephson junctions with an area of 3.09 × 1.66 mm2. It achieved the target frequency of 50 GHz and a latency of 524 ps for a 32-bit operation, at the designed DC bias voltage of 2.5 mV, via precise control of interconnect delays and clock distribution. Furthermore, it achieved a throughput of 6.25 × 10932-bit operations per second. All the correct ALU operations with measured DC bias voltage margins of around 10% at 50 GHz were successfully obtained. The proposed ALU can be used for any 4n-bit processing.
Logic design of a 16-bit bit-slice shifter for 64-bit superconducting rapid single-flux-quantum (RSFQ) microprocessors is proposed. The shifter supports three types of shift operations including logic shift, arithmetic shift and rotating shift. Each of 64-bit shift input operands is divided into four slices of 16-bit each. In order to simulate the digital function and timing of the proposed 16-bit bit-slice shifter, we design a logic-level simulation model based on the Open Dataset of CONNECT Cell Library for AIST ADP2. As the results of simulation, the information of RSFQ circuits, such as the number of Josephson junctions, area and latency of the 16-bit bit slice shifter can be obtained. The simulation results show that the proposed 16-bit bit-slice shifter can work correctly.
We have designed a Rapid Single-Flux-Quantum (RSFQ) bit-serial real-time pipeline multiplier for digital signal processing (DSP) applications. A single-bit module of this multiplier consists of 96 Josephson junctions and uses a B-flip-flop-based carry-save adder (CSA). For HYPRES' standard 1-kA/cm/sup 2/ Nb process with 3.5 /spl mu/m-diameter Josephson junctions the module occupies all area of 350/spl times/600 /spl mu/m/sup 2/. Simulations show that the circuit should dissipate 28 /spl mu/W of power at 2.6 mV dc supply voltage and operate at frequencies of up to 25 GHz. We have successfully tested all cells of the module and verified correct operation of a simplified version of the module at low frequencies. According to numerical simulations, the speed of the multiplier is limited by the CSA. In order to overcome this bottleneck we have developed a concept of a fast carry-save pipeline adder based on XOR gates which uses an RSFQ-specific algorithm for carry bit calculation.>