Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Transactions on Applied Superconductivity

Design of an 8-bit Bit-Parallel RSFQ Microprocessor

Pei-Yao Qu, Guang-Ming Tang, Jia-Hong Yang, Xiaochun Ye, Dongrui Fan, Zhimin Zhang, Ninghui Sun

Published Aug 18, 2020• 12 citations
Publisher

Abstract

With Moore's law approaching its physical limits, low-temperature computing technology is ushering in unprecedented development opportunities. Rapid single-flux-quantum (RSFQ) circuit technology is currently the most mature superconducting integrated circuit technology. Based on the current fabrication process, we propose an 8-bit bit-parallel RSFQ microprocessor. The proposed microprocessor processes 8-bit data each clock cycle. Ten different instructions are executed. The microprocessor mainly consists of an on-chip instruction memory, two data registers, an instruction decoder, an 8-bit bit-parallel arithmetic logic unit, and a program counter. The microprocessor contains 7702 JJs (based on the Open Dataset of CONNECT Cell Library for AIST ADP2) without considering splitters, Josephson transmission lines, and passive transmission lines. We perform a logic-level simulation of the proposed microprocessor. The simulation results show correct operation with a target frequency of 16.7 GHz.

DOI
10.1109/tasc.2020.3017527

Related papers

Design of Datapath Circuits for a Bit-Parallel 8-bit RSFQ Microprocessor

Pei-Yao Qu, Guang-Ming Tang, Xiaochun Ye +3 more

Rapid single-flux-quantum (RSFQ) is expected to be the next generation integrated circuit technology because of its ultra-high-speed with ultra-low-power consumption. We propose datapath circuits for an 8-bit bit-parallel RSFQ microprocessor. The proposed datapath circuits process 8-bit data each clock cycle. Seven instructions are executed in the datapath, including ADD, ADDI, IN, OUT, LOADI, SRL and MOV. The datapath circuits consist of eight input ports, eight output ports, five multiplexers (MUXs), two 8-bit data registers and one 8-bit bit-parallel arithmetic logic unit (ALU). The datapath circuits contain 12 pipeline stages and 2993 JJs based on the Open Dataset of CONNECT Cell Library for AIST ADP2 without considering wiring cells. We perform digital simulation of the proposed datapath circuits. The simulation results show correct operation with the assumed frequency of 20 GHz.

IEEE International Superconductive Electronics Conference (ISEC)•Jul 1, 2019•3 citations

ARCHITECTURE AND DESIGN OF AN 8-BIT FLUX-1 SUPERCONDUCTOR RSFQ MICROPROCESSOR

M. Dorojevets

The first single-chip superconductor FLUX-1 microprocessor has been designed in the Rapid Single Flux Quantum (RSFQ) logic and fabricated using 4 kA/cm2, 1.75-μm Nb/AlOx/Nb Josephson junction technology as a result of the collaboration between SUNY Stony Brook and TRW, Inc. A FLUX-1 chip represents an 8-bit deeply pipelined microprocessor prototype with a target clock frequency of 17-20 GHz. A new parallel partitioned architecture has been developed in order to tolerate interconnect delays and fill long FLUX-1 processor pipelines with useful instructions. The processor includes the 16 × 32-bit pipelined instruction memory, 8 integer arithmetic-logic units interleaved with 8 registers, the branch unit, and I/O ports for 5-GHz chip-to-chip communication over Nb microstrip lines on a chip carrier. The FLUX-1 instruction set consists of ~25 arithmetic, logical, and control instructions. A FLUX-1 microprocessor chip contains 65,759 Josephson junctions on a 10.6 mm × 13.2 mm die with flip-chip packaging. First FLUX-1 chips fabricated in August 2001 are currently under testing at TRW, Inc.

International Journal of High Speed Electronics and Systems•Jun 1, 2002•8 citations

Design and Demonstration of an 8-bit Bit-Serial RSFQ Microprocessor: CORE e4

Yuki Ando, Ryo Sato, Masamitsu Tanaka +3 more

We present a design of an 8-bit bit-serial rapid single-flux-quantum (RSFQ) microprocessor, which is called CORE e4, and its high-speed functionality test results. The CORE e4 is equipped with four general-purpose registers and can execute 20 different instructions. The first version of the CORE e4, which is called CORE e4v1, has been implemented using the National Institute of Advanced Industrial Science and Technology (AIST) 10-kA/cm2advanced process (ADP2) and the CONNECT cell library. The CORE e4v1 consists of approximately 7000 Josephson junctions and occupies a circuit area of 3.00 mm × 1.98 mm. The estimated power consumption and performance are 2.03 mW and 333 million instructions per second, respectively. CORE e4 is one of the highest performing RSFQ microprocessors.

IEEE Transactions on Applied Superconductivity•May 10, 2016•100 citations

Logic Design of a 16-bit Bit-Slice Shifter for 64-bit RSFQ Microprocessors

Wei Xuan, Guang-Ming Tang, Pei-Yao Qu +5 more

Logic design of a 16-bit bit-slice shifter for 64-bit superconducting rapid single-flux-quantum (RSFQ) microprocessors is proposed. The shifter supports three types of shift operations including logic shift, arithmetic shift and rotating shift. Each of 64-bit shift input operands is divided into four slices of 16-bit each. In order to simulate the digital function and timing of the proposed 16-bit bit-slice shifter, we design a logic-level simulation model based on the Open Dataset of CONNECT Cell Library for AIST ADP2. As the results of simulation, the information of RSFQ circuits, such as the number of Josephson junctions, area and latency of the 16-bit bit slice shifter can be obtained. The simulation results show that the proposed 16-bit bit-slice shifter can work correctly.

IEEE International Superconductive Electronics Conference (ISEC)•Jul 1, 2019•3 citations

RSFQ 4-bit Bit-Slice Integer Multiplier

Guang-Ming Tang, Kazuyoshi Takagi, Naofumi Takagi

A rapid single-flux-quantum (RSFQ) 4-bit bit-slice multiplier is proposed. A new systolic-like multiplication algorithm suitable for RSFQ implementation is developed. The multiplier is designed using the cell library for AIST 10-kA/cm2 1.0-μm fabrication technology (ADP2). Concurrent flow clocking is used to design a fully pipelined RSFQ logic design. A 4n x 4n-bit multiplier consists of 2n + 17 stages. For verifying the algorithm and the logic design, a physical layout of the 8 x 8-bit multiplier has been designed with target operating frequency of 50 GHz and simulated. It consists of 21 stages and 11, 488 Josephson junctions. The simulation results show correct operation up to 62.5 GHz.

IEICE Transactions on Electronics•Jan 1, 2016•12 citations

A 20-GHz FLUX-1 superconductor RSFQ microprocessor

M. Dorojevets

The first single-chip superconductor FLUX-1 microprocessor prototype with a target clock frequency of 17-20 GHz has been designed in the Rapid Single Flux Quantum (RSFQ) logic and fabricated using low-temperature 4 kA/cm 2 , 1.75-μm Nb/AlOx/Nb Josephson junction technology. A FLUX-1 chip represents an 8-bit deeply pipelined microprocessor with a new parallel partitioned architecture that has been developed to tolerate interconnect delays and fill long FLUX-1 pipelines with operations. A FLUX-1 chip contains 65,759 Josephson junctions on a 10.6 mm x 13.2 mm die with flip-chip packaging. First FLUX-1 chips fabricated in 2001 are currently under testing at TRW.

Journal de Physique IV (Proceedings)•May 1, 2002•4 citations
With Moore's law approaching its physical limits, low-temperature computing technology is ushering in unprecedented development opportunities. Rapid single-flux-quantum (RSFQ) circuit technology is currently the most mature superconducting integrated circuit technology. Based on the current fabrication process, we propose an 8-bit bit-parallel RSFQ microprocessor. The proposed microprocessor processes 8-bit data each clock cycle. Ten different instructions are executed. The microprocessor mainly consists of an on-chip instruction memory, two data registers, an instruction decoder, an 8-bit bit-parallel arithmetic logic unit, and a program counter. The microprocessor contains 7702 JJs (based on the Open Dataset of CONNECT Cell Library for AIST ADP2) without considering splitters, Josephson transmission lines, and passive transmission lines. We perform a logic-level simulation of the proposed microprocessor. The simulation results show correct operation with a target frequency of 16.7 GHz.
Rapid single-flux-quantum (RSFQ) is expected to be the next generation integrated circuit technology because of its ultra-high-speed with ultra-low-power consumption. We propose datapath circuits for an 8-bit bit-parallel RSFQ microprocessor. The proposed datapath circuits process 8-bit data each clock cycle. Seven instructions are executed in the datapath, including ADD, ADDI, IN, OUT, LOADI, SRL and MOV. The datapath circuits consist of eight input ports, eight output ports, five multiplexers (MUXs), two 8-bit data registers and one 8-bit bit-parallel arithmetic logic unit (ALU). The datapath circuits contain 12 pipeline stages and 2993 JJs based on the Open Dataset of CONNECT Cell Library for AIST ADP2 without considering wiring cells. We perform digital simulation of the proposed datapath circuits. The simulation results show correct operation with the assumed frequency of 20 GHz.
The first single-chip superconductor FLUX-1 microprocessor has been designed in the Rapid Single Flux Quantum (RSFQ) logic and fabricated using 4 kA/cm2, 1.75-μm Nb/AlOx/Nb Josephson junction technology as a result of the collaboration between SUNY Stony Brook and TRW, Inc. A FLUX-1 chip represents an 8-bit deeply pipelined microprocessor prototype with a target clock frequency of 17-20 GHz. A new parallel partitioned architecture has been developed in order to tolerate interconnect delays and fill long FLUX-1 processor pipelines with useful instructions. The processor includes the 16 × 32-bit pipelined instruction memory, 8 integer arithmetic-logic units interleaved with 8 registers, the branch unit, and I/O ports for 5-GHz chip-to-chip communication over Nb microstrip lines on a chip carrier. The FLUX-1 instruction set consists of ~25 arithmetic, logical, and control instructions. A FLUX-1 microprocessor chip contains 65,759 Josephson junctions on a 10.6 mm × 13.2 mm die with flip-chip packaging. First FLUX-1 chips fabricated in August 2001 are currently under testing at TRW, Inc.
We present a design of an 8-bit bit-serial rapid single-flux-quantum (RSFQ) microprocessor, which is called CORE e4, and its high-speed functionality test results. The CORE e4 is equipped with four general-purpose registers and can execute 20 different instructions. The first version of the CORE e4, which is called CORE e4v1, has been implemented using the National Institute of Advanced Industrial Science and Technology (AIST) 10-kA/cm2advanced process (ADP2) and the CONNECT cell library. The CORE e4v1 consists of approximately 7000 Josephson junctions and occupies a circuit area of 3.00 mm × 1.98 mm. The estimated power consumption and performance are 2.03 mW and 333 million instructions per second, respectively. CORE e4 is one of the highest performing RSFQ microprocessors.
Logic design of a 16-bit bit-slice shifter for 64-bit superconducting rapid single-flux-quantum (RSFQ) microprocessors is proposed. The shifter supports three types of shift operations including logic shift, arithmetic shift and rotating shift. Each of 64-bit shift input operands is divided into four slices of 16-bit each. In order to simulate the digital function and timing of the proposed 16-bit bit-slice shifter, we design a logic-level simulation model based on the Open Dataset of CONNECT Cell Library for AIST ADP2. As the results of simulation, the information of RSFQ circuits, such as the number of Josephson junctions, area and latency of the 16-bit bit slice shifter can be obtained. The simulation results show that the proposed 16-bit bit-slice shifter can work correctly.
A rapid single-flux-quantum (RSFQ) 4-bit bit-slice multiplier is proposed. A new systolic-like multiplication algorithm suitable for RSFQ implementation is developed. The multiplier is designed using the cell library for AIST 10-kA/cm2 1.0-μm fabrication technology (ADP2). Concurrent flow clocking is used to design a fully pipelined RSFQ logic design. A 4n x 4n-bit multiplier consists of 2n + 17 stages. For verifying the algorithm and the logic design, a physical layout of the 8 x 8-bit multiplier has been designed with target operating frequency of 50 GHz and simulated. It consists of 21 stages and 11, 488 Josephson junctions. The simulation results show correct operation up to 62.5 GHz.
The first single-chip superconductor FLUX-1 microprocessor prototype with a target clock frequency of 17-20 GHz has been designed in the Rapid Single Flux Quantum (RSFQ) logic and fabricated using low-temperature 4 kA/cm 2 , 1.75-μm Nb/AlOx/Nb Josephson junction technology. A FLUX-1 chip represents an 8-bit deeply pipelined microprocessor with a new parallel partitioned architecture that has been developed to tolerate interconnect delays and fill long FLUX-1 pipelines with operations. A FLUX-1 chip contains 65,759 Josephson junctions on a 10.6 mm x 13.2 mm die with flip-chip packaging. First FLUX-1 chips fabricated in 2001 are currently under testing at TRW.