Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Acta Physica Sinica

Research on group velocity slowdown in erbium-doped optical fiber under controllable absorption loss

Qiu Wei, Zhang Yun-Dong, Jianbo Ye, Tian He, Nan Wang, Hao Wang, Wang Jinfang, Ping Yuan, 哈尔滨工业大学光电子技术研究所，哈尔滨 150080

Published Jan 1, 2008• 1 citation
Publisher

Abstract

Group velocity of the optical pulse propagation would be reduced based on coherent population oscillation effect in an absorbing medium. According to the absorption properties of erbium-doped optical fiber, there would appear a sharp absorption loss, which brought more difficulties to the actual measurement of slow light and its application in communications. From the ground rate equation of erbium-ion, the delay of optical pulse was simulated under controllable absorption loss， and experiments were implemented to verify the theoretical results. Moreover, we researched how the different pump power and fiber length effect the signal loss and the optical pulse delay.

DOI
10.7498/aps.57.2242

Related papers

Slowdown of group velocity of light pulse in erbium-doped optical fiber amplifier under no absorption loss at a room temperature

Qiu Wei, Ma Ying-Chi, L uuml Pin +3 more

Because of the absorption of erbium-doped optical fiber, the group velocity of the optical pulse propagation is slowed down and the intensity of signal is reduced, which brings more difficulties to the actual measurement of slow light and its application in communications, such as the distortion and the low measurement.Therefore only after the group velocity slowdown of light pulse in erbium-doped optical fiber under no absorption loss is realized, can the slow light technology really have the practical application. We investigate the erbium-doped optical fiber amplifier deeply and develop a technology, in which the different pump powers and fiber lengths are used to reduce the signal loss through theoretical calculation and realize the group velocity slowdown of light pulse. The results show that no absorption loss is realized at a pump power of 3.5 mW, and we realize the slow light with a fiber length of 0.1 m when the pump power is zero.

Acta Physica Sinica•Jan 1, 2012•1 citation

VARIABLE GROUP VELOCITY SLOWDOWN IN SLOW-LIGHT MEDIA

WEI QIU, Yundong Zhang, Jianbo Ye +5 more

We investigated the variations of group velocity slowdown in erbium-doped optical fiber. According to the population oscillation effect, the numerical model of the group velocity slowdown was established. From the theoretical calculation, the group velocity slowdown is tunable due to the variety of steady ground state erbium ion population [Formula: see text]. To validate the effect of ion population for slow light, the experimental research was implemented via highly-doped erbium fiber.

Modern Physics Letters B•Apr 10, 2008•0 citations

Tunable Group Velocity of Light Propagation and Its Application

Yonglan Hou, Chao Peng, Lei Jia +2 more

In this paper, we proposed a novel approach to demonstrate optically controllable pulse group velocity at telecommunication wavelengths in EDF due to CPO. First we reviewed recent advances in slow-light-based optical signal processing, then we study slow and fast light propagation in erbium doped fiber abstractly based on theory and simulation model. It is revealed though the research that the time delay and advancement depends greatly on the pump power, influence of the ion density on the group velocity of light propagation is also studied. Based on our discussion, the optimization parameters should be selected in order to obtain more appropriate time delay and the slowdown of group velocity, which is of great importance to the communication industry.

Symposium on Photonics and Optoelectronics•Aug 1, 2009•0 citations

Slowdown of The Group Velocity in Tm~(3+)-doped Optical Fiber

Qiu We

According to the transition rates equation of the ground state population and the propagation equation,the numerical model of the group velocity slowdown was established. The relationship between the gain and pump power was analysized. In the absorption area of Tm3 +-dopedoptical fiber,the oscillation leads the pulse to experience absorption saturation,and the propagation delays.In the gain area of Tm3 +-doped optical fiber,this effect induces the pulse to experience gain saturation,and the propagation is in advance. According to the theoretical calculation,the group velocity slowdown is tunable due to coherent population oscillation in the Tm3 +-doped optical fiber amplifier at room temperature.

Chinese Journal of Luminescence•Jan 1, 2015•0 citations

Study on the relationship between the population of metastable state and time delay in an erbium-doped optical fiber

Qiu Wei, 高波 Gao Bo, Peng Lin +5 more

The slow light propagation in optical fiber has attracted much attention because of its practical applications. Use of coherent population oscillation to produce slow light propagation has many advantages over other methods. We investigate the reduction of the group velocity propagation by the coherent population oscillation in erbium-doped optical fiber, and also the relationship between the population of metastable state and the time delay by changing the doping concentration, the length of the fiber, the input power, and the pump power. The results show that we can select a high doping concentration of erbium in the fiber, increase the length of the fiber, decrease the pump power and select the appropriate power of the signal light to increases the time delay.

Acta Physica Sinica•Jan 1, 2013•1 citation

Slowdown of Group Velocity of Light Using Coherent Population Oscillation

Qiu Wei, Zhang Yun-Dong, Jianbo Ye +4 more

We investigate the reduction of the group velocity propagation resulting from the steep change of the refractive index by the coherent population oscillation in erbium-doped optical fibre. The largest delay is measured to be about 8.75ms corresponding to a group index of 1.312 × 10 6 . The time delay or advancement depends on the pump intensity. Influences of the ion density on the fractional delay and the group velocity reduction of light propagation are studied. Based on our discussion the optimization parameters should be selected in order to obtain more appropriate time delay and the slowdown of group velocity.

Chinese Physics Letters•Feb 1, 2008•5 citations
Group velocity of the optical pulse propagation would be reduced based on coherent population oscillation effect in an absorbing medium. According to the absorption properties of erbium-doped optical fiber, there would appear a sharp absorption loss, which brought more difficulties to the actual measurement of slow light and its application in communications. From the ground rate equation of erbium-ion, the delay of optical pulse was simulated under controllable absorption loss， and experiments were implemented to verify the theoretical results. Moreover, we researched how the different pump power and fiber length effect the signal loss and the optical pulse delay.
Because of the absorption of erbium-doped optical fiber, the group velocity of the optical pulse propagation is slowed down and the intensity of signal is reduced, which brings more difficulties to the actual measurement of slow light and its application in communications, such as the distortion and the low measurement.Therefore only after the group velocity slowdown of light pulse in erbium-doped optical fiber under no absorption loss is realized, can the slow light technology really have the practical application. We investigate the erbium-doped optical fiber amplifier deeply and develop a technology, in which the different pump powers and fiber lengths are used to reduce the signal loss through theoretical calculation and realize the group velocity slowdown of light pulse. The results show that no absorption loss is realized at a pump power of 3.5 mW, and we realize the slow light with a fiber length of 0.1 m when the pump power is zero.
In this paper, we proposed a novel approach to demonstrate optically controllable pulse group velocity at telecommunication wavelengths in EDF due to CPO. First we reviewed recent advances in slow-light-based optical signal processing, then we study slow and fast light propagation in erbium doped fiber abstractly based on theory and simulation model. It is revealed though the research that the time delay and advancement depends greatly on the pump power, influence of the ion density on the group velocity of light propagation is also studied. Based on our discussion, the optimization parameters should be selected in order to obtain more appropriate time delay and the slowdown of group velocity, which is of great importance to the communication industry.
According to the transition rates equation of the ground state population and the propagation equation,the numerical model of the group velocity slowdown was established. The relationship between the gain and pump power was analysized. In the absorption area of Tm3 +-dopedoptical fiber,the oscillation leads the pulse to experience absorption saturation,and the propagation delays.In the gain area of Tm3 +-doped optical fiber,this effect induces the pulse to experience gain saturation,and the propagation is in advance. According to the theoretical calculation,the group velocity slowdown is tunable due to coherent population oscillation in the Tm3 +-doped optical fiber amplifier at room temperature.
The slow light propagation in optical fiber has attracted much attention because of its practical applications. Use of coherent population oscillation to produce slow light propagation has many advantages over other methods. We investigate the reduction of the group velocity propagation by the coherent population oscillation in erbium-doped optical fiber, and also the relationship between the population of metastable state and the time delay by changing the doping concentration, the length of the fiber, the input power, and the pump power. The results show that we can select a high doping concentration of erbium in the fiber, increase the length of the fiber, decrease the pump power and select the appropriate power of the signal light to increases the time delay.
We investigate the reduction of the group velocity propagation resulting from the steep change of the refractive index by the coherent population oscillation in erbium-doped optical fibre. The largest delay is measured to be about 8.75ms corresponding to a group index of 1.312 × 10 6 . The time delay or advancement depends on the pump intensity. Influences of the ion density on the fractional delay and the group velocity reduction of light propagation are studied. Based on our discussion the optimization parameters should be selected in order to obtain more appropriate time delay and the slowdown of group velocity.