Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Applied Optics

Information-theoretic analysis of a stimulated-Brillouin-scattering-based slow-light system

Myungjun Lee, Yunhui Zhu, Daniel J. Gauthier, Michael E. Gehm, Mark Allen Neifeld

Published Nov 3, 2011• 9 citations
Publisher

Abstract

We use an information-theoretic method developed by Neifeld and Lee [J. Opt. Soc. Am. A 25, C31 (2008)] to analyze the performance of a slow-light system. Slow-light is realized in this system via stimulated Brillouin scattering in a 2 km-long, room-temperature, highly nonlinear fiber pumped by a laser whose spectrum is tailored and broadened to 5 GHz. We compute the information throughput (IT), which quantifies the fraction of information transferred from the source to the receiver and the information delay (ID), which quantifies the delay of a data stream at which the information transfer is largest, for a range of experimental parameters. We also measure the eye-opening (EO) and signal-to-noise ratio (SNR) of the transmitted data stream and find that they scale in a similar fashion to the information-theoretic method. Our experimental findings are compared to a model of the slow-light system that accounts for all pertinent noise sources in the system as well as data-pulse distortion due to the filtering effect of the SBS process. The agreement between our observations and the predictions of our model is very good. Furthermore, we compare measurements of the IT for an optimal flattop gain profile and for a Gaussian-shaped gain profile. For a given pump-beam power, we find that the optimal profile gives a 36% larger ID and somewhat higher IT compared to the Gaussian profile. Specifically, the optimal (Gaussian) profile produces a fractional slow-light ID of 0.94 (0.69) and an IT of 0.86 (0.86) at a pump-beam power of 450 mW and a data rate of 2.5 Gbps. Thus, the optimal profile better utilizes the available pump-beam power, which is often a valuable resource in a system design.

DOI
10.1364/ao.50.006063

Related papers

A VARIETY OF SLOW-LIGHT TECHNOLOGIES IN NONLINEAR DISPERSIVE MEDIA

Myungjun Lee

Over the past few years, researchers have directed a significant amount of effort towards realizing tunable all-optical devices using nonlinear optical methods. It is now possible to exercise dynamic control of the group velocity of light traveling through a wide variety of material systems. The slow and fast light refer to situations in which the group velocity íg of an optical pulse through a dispersive material can be made to be smaller and larger, respectively, than the phase velocity vp = c/n. This ability could overcome the remaining challenge in current optical networks of storing and manipulating an optical signal directly in optical domain so as to avoid a bottleneck due to optical-to-electrical (O/E) and electrical-to-optical (E/O) conversions. The overall purpose of the dissertation is to study novel slow-light systems that provide controlled generation of large pulse delays relative to the pulse width with minimal pulse shape distortion by optimally design resonance profiles of such systems. The system design studies utilize several measures of performance such as the fractional delay, power throughput, and signal distortion under the limited system resource constraints. To this end, powerful data fidelity metrics are required to quantify the performance of tunable delay devices. Here, a new framework for measuring an information velocity and throughput is described and implemented using Shannon mutual information concepts. This new technique is used to investigate trends, trade-offs, and limits in slow light devices, which are physically sensible and in good agreement with analyses obtained using a conventional eye-opening(EO) metric. Using these information-theoretic and/or conventional metrics, we present the quantifying performance of gain-based stimulated Brillouin scattering (SBS) system in optical fibers as well as optical passive devices such as Fabry-Perot, fiber Bragg gratings, and ring resonators. It is shown that combining the SBS gain medium with these passive devices can compensate their respective disadvantages and thus increase delay performance without using additional resource of SBS pump power. The results show the possibility of achieving a fractional delay up to 10 at a signal bandwidth up to tens of GHz.

•Jan 1, 2010•0 citations

Optimal pump profile designs for broadband SBS slow-light systems

Ravi Pant, Michael D. Stenner, Mark Allen Neifeld +1 more

We describe a methodology for designing the optimal gain profiles for gain-based, tunable, broadband, slow-light pulse delay devices based on stimulated Brillouin scattering. Optimal gain profiles are obtained under system constraints such as distortion, total pump power, and maximum gain. The delay performance of three candidate systems: Gaussian noise pump broadened (GNPB), optimal gain-only, and optimal gain+absorption are studied using Gaussian and super-Gaussian pulses. For the same pulse bandwidth, we find that the optimal gain+absorption medium improves the delay performance by 2.1 times the GNPB medium delay and 1.3 times the optimal gain-only medium delay for Gaussian pulses. For the super-Gaussian pulses the optimal gain-only medium provides a fractional pulse delay 1.8 times the GNPB medium delay.

Optics Express•Jan 1, 2008•79 citations

On the balance between delay, bandwidth and signal distortion in slow light systems based on stimulated Brillouin scattering in optical fibers

Evgeny Shumakher, N. Orbach, Amir Nevet +2 more

We describe systematic measurements of the gain and delay spectra in a slow light system based on stimulated Brillouin scattering in optical fibers. The measurements yield the system complex transfer function with which delays and signal distortion can be calculated for any input signal. The theoretical predictions are confirmed experimentally for single pulses as well as 50 Mb/s data streams in a system which employs pump modulation to modify the gain and delay spectra of the SBS process.

Optics Express•Jan 1, 2006•46 citations

Theoretical analysis and experiment performance of slow-light based on stimulated Brillouin scattering (SBS)

Hongyan Zhou, Kun Hua Zhong, Ru Zhang +1 more

Slow light technology will play a key role in future all-optical communication. The slow-light technology based on stimulated Brillouin scattering has become a research highlight because of its additional advantages, such as compatibility of the devices with existing telecommunication systems, room-temperature operation, and tunable at arbitrary wavelengths. According to the propagation of a cw pulse through a Brillouin fiber amplifier, whose frequency is near the Stokes resonance, via three-wave coupling equations, both pump depletion and fiber losses taken into consideration, the principle of how slow-light effect based on stimulated Brillouin scattering produced and the mathematical expression of time delay are strictly deduced. A delay of 8 ns is obtained when the input Stokes pulse is 200ns and the SBS (stimulated Brillouin scattering) gain G is ~18 in our designed experiment of SBS slow-light system. Then the extent of transformation from pump waves to Stokes waves is measured using MATLAB numerical simulation according to the experiment dates, based on the relation between output pump light power and input pump light power and also the relation between output Stokes light power and input pump light power. And the relation between the input light power and propagation distance is discussed as well. Finally the relation between slow light pulse delay and SBS gain is also obtained.

Journal of Physics Conference Series•Feb 1, 2011•0 citations

Optimisation of optical signal delay in slow-light systems based on stimulated brillouin scattering

Ronny Henker, Thomas Schneider, Andrzej Wiatrek +4 more

Different Slow-light systems have been discussed and developed as a powerful tool to reduce the group velocity of optical signals during the last years. It has enjoyed much recent interest because of the potential system applications in optical telecommunication and information systems. Especially the nonlinear effect of stimulated Brillouin scattering (SBS) has become important for fiber based Slow-light systems. But, the SBS also has two challenges. First, the maximum time delay is limited due to the saturation of the Brillouin amplification process and second, the delay of the pulses is accompanied by pulse distortions (pulse shape broadening). For these aspects the shape of the Brillouin spectrum is of special interest. In this article a system is presented which allows the optimisation of the Brillouin spectrum. Simulations and first measurements show how the time delay can be enhanced with a simultaneous reduction of the pulse distortions.

Irish Signals and Systems Conference•Jan 1, 2008•3 citations

Information theoretic framework for the analysis of a slow-light delay device

Mark Allen Neifeld, Myungjun Lee

We present a framework for the information theoretic analysis of slow-light devices. We employ a model in which the device input is a binary-valued data sequence and the device output is considered within a window of finite duration. We use the mutual information between these two quantities to measure information content. This approach enables the information theoretic definitions of delay and throughput. We use our new framework to analyze a delay device based on stimulated Brillouin scattering (SBS) and find good agreement with previous SBS delay bounds.

Journal of the Optical Society of America B•Sep 5, 2008•11 citations
We use an information-theoretic method developed by Neifeld and Lee [J. Opt. Soc. Am. A 25, C31 (2008)] to analyze the performance of a slow-light system. Slow-light is realized in this system via stimulated Brillouin scattering in a 2 km-long, room-temperature, highly nonlinear fiber pumped by a laser whose spectrum is tailored and broadened to 5 GHz. We compute the information throughput (IT), which quantifies the fraction of information transferred from the source to the receiver and the information delay (ID), which quantifies the delay of a data stream at which the information transfer is largest, for a range of experimental parameters. We also measure the eye-opening (EO) and signal-to-noise ratio (SNR) of the transmitted data stream and find that they scale in a similar fashion to the information-theoretic method. Our experimental findings are compared to a model of the slow-light system that accounts for all pertinent noise sources in the system as well as data-pulse distortion due to the filtering effect of the SBS process. The agreement between our observations and the predictions of our model is very good. Furthermore, we compare measurements of the IT for an optimal flattop gain profile and for a Gaussian-shaped gain profile. For a given pump-beam power, we find that the optimal profile gives a 36% larger ID and somewhat higher IT compared to the Gaussian profile. Specifically, the optimal (Gaussian) profile produces a fractional slow-light ID of 0.94 (0.69) and an IT of 0.86 (0.86) at a pump-beam power of 450 mW and a data rate of 2.5 Gbps. Thus, the optimal profile better utilizes the available pump-beam power, which is often a valuable resource in a system design.
Over the past few years, researchers have directed a significant amount of effort towards realizing tunable all-optical devices using nonlinear optical methods. It is now possible to exercise dynamic control of the group velocity of light traveling through a wide variety of material systems. The slow and fast light refer to situations in which the group velocity íg of an optical pulse through a dispersive material can be made to be smaller and larger, respectively, than the phase velocity vp = c/n. This ability could overcome the remaining challenge in current optical networks of storing and manipulating an optical signal directly in optical domain so as to avoid a bottleneck due to optical-to-electrical (O/E) and electrical-to-optical (E/O) conversions. The overall purpose of the dissertation is to study novel slow-light systems that provide controlled generation of large pulse delays relative to the pulse width with minimal pulse shape distortion by optimally design resonance profiles of such systems. The system design studies utilize several measures of performance such as the fractional delay, power throughput, and signal distortion under the limited system resource constraints. To this end, powerful data fidelity metrics are required to quantify the performance of tunable delay devices. Here, a new framework for measuring an information velocity and throughput is described and implemented using Shannon mutual information concepts. This new technique is used to investigate trends, trade-offs, and limits in slow light devices, which are physically sensible and in good agreement with analyses obtained using a conventional eye-opening(EO) metric. Using these information-theoretic and/or conventional metrics, we present the quantifying performance of gain-based stimulated Brillouin scattering (SBS) system in optical fibers as well as optical passive devices such as Fabry-Perot, fiber Bragg gratings, and ring resonators. It is shown that combining the SBS gain medium with these passive devices can compensate their respective disadvantages and thus increase delay performance without using additional resource of SBS pump power. The results show the possibility of achieving a fractional delay up to 10 at a signal bandwidth up to tens of GHz.
We describe a methodology for designing the optimal gain profiles for gain-based, tunable, broadband, slow-light pulse delay devices based on stimulated Brillouin scattering. Optimal gain profiles are obtained under system constraints such as distortion, total pump power, and maximum gain. The delay performance of three candidate systems: Gaussian noise pump broadened (GNPB), optimal gain-only, and optimal gain+absorption are studied using Gaussian and super-Gaussian pulses. For the same pulse bandwidth, we find that the optimal gain+absorption medium improves the delay performance by 2.1 times the GNPB medium delay and 1.3 times the optimal gain-only medium delay for Gaussian pulses. For the super-Gaussian pulses the optimal gain-only medium provides a fractional pulse delay 1.8 times the GNPB medium delay.
Slow light technology will play a key role in future all-optical communication. The slow-light technology based on stimulated Brillouin scattering has become a research highlight because of its additional advantages, such as compatibility of the devices with existing telecommunication systems, room-temperature operation, and tunable at arbitrary wavelengths. According to the propagation of a cw pulse through a Brillouin fiber amplifier, whose frequency is near the Stokes resonance, via three-wave coupling equations, both pump depletion and fiber losses taken into consideration, the principle of how slow-light effect based on stimulated Brillouin scattering produced and the mathematical expression of time delay are strictly deduced. A delay of 8 ns is obtained when the input Stokes pulse is 200ns and the SBS (stimulated Brillouin scattering) gain G is ~18 in our designed experiment of SBS slow-light system. Then the extent of transformation from pump waves to Stokes waves is measured using MATLAB numerical simulation according to the experiment dates, based on the relation between output pump light power and input pump light power and also the relation between output Stokes light power and input pump light power. And the relation between the input light power and propagation distance is discussed as well. Finally the relation between slow light pulse delay and SBS gain is also obtained.
Different Slow-light systems have been discussed and developed as a powerful tool to reduce the group velocity of optical signals during the last years. It has enjoyed much recent interest because of the potential system applications in optical telecommunication and information systems. Especially the nonlinear effect of stimulated Brillouin scattering (SBS) has become important for fiber based Slow-light systems. But, the SBS also has two challenges. First, the maximum time delay is limited due to the saturation of the Brillouin amplification process and second, the delay of the pulses is accompanied by pulse distortions (pulse shape broadening). For these aspects the shape of the Brillouin spectrum is of special interest. In this article a system is presented which allows the optimisation of the Brillouin spectrum. Simulations and first measurements show how the time delay can be enhanced with a simultaneous reduction of the pulse distortions.
We present a framework for the information theoretic analysis of slow-light devices. We employ a model in which the device input is a binary-valued data sequence and the device output is considered within a window of finite duration. We use the mutual information between these two quantities to measure information content. This approach enables the information theoretic definitions of delay and throughput. We use our new framework to analyze a delay device based on stimulated Brillouin scattering (SBS) and find good agreement with previous SBS delay bounds.