Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Conference on Precision Electromagnetic Measurements

Nb/Al-AlOx/Nb overdamped junctions suitable for voltage standard operation above 4.2 K

V. Lacquaniti, Natascia De Leo, Matteo Fretto, A. Sosso

Published Jun 1, 2008• 0 citations
Publisher

Abstract

Nb/Al-AlOx/Nb Josephson junctions of few micrometers size, derived by the basic hysteretic SIS process, have shown stable overdamped current voltage, I-V, characteristic with Ic of 1–10 mA and Vc of 100–600 μV at 4.2 K. The moderate dependence on temperature of these parameters has allowed to use them at temperatures above 4.2 K, near the Nb transition temperature, measuring quantized voltage steps several hundreds μA wide on single and 10 junctions arrays at T ≫ 8 K. This paves the way to their use in cryocooler setup of reduced cost and power consumption for a future generation of programmable and AC voltage standard.

DOI
10.1109/cpem.2008.4574675

Related papers

Overdamped Josephson junctions for applications to precision measurement

V. Lacquaniti, Domenico Andreone, Matteo Fretto +6 more

Overdamped Nb/Al-AlOx/Nb Josephson junctions are an intermediate state between the SIS and SNS Josephson junctions. With a proper choice of fabrication parameters, stable and reproducible nonhysteretic curent-voltage characteristics have been obtained Featuring critical current densities up to 70 kA/cm2and characteristic voltages up to 450 μV at 4.2 K, overdamped junctions are suitable for many aplications ranging from RSFQ electronic circuits to programmable and ac voltage standards. Tests on single junctions arrays of series-connected junctions have shown a suitable behaviour when driven by a microwave with frequencies around 75 GHz. The quantized steps have proven to be stable and flat at nV level. These junctions also shown an improved temperature dependence, which can be interesting in view of the development instrumentation with an integrated quantum voltage reference operated in a closed cycle refrigerator.

International Workshop on Advances in Sensors and Interfaces (IWASI)•Jan 1, 2007•0 citations

Engineering Overdamped Niobium-Based Josephson Junctions for Operation Above 4.2 K

V. Lacquaniti, Domenico Andreone, Natascia De Leo +3 more

Niobium-based junctions are still the best candidates for many small-scale applications of superconductivity and in particular, for the design and the fabrication of programmable voltage standards and D/A converters of fundamental accuracy. Non-hysteretic junctions with a large current density JC, and a reasonable characteristic voltage Vc are required, while, in order to make these circuits available to a wider market, operation at temperatures above 4.2 K would be important. In this work we report our results achieved on Nb/Al-AlOX/Nb junctions whose properties are studied in order to optimize the aforementioned features. Their behavior is analyzed showing how the overdamped characteristic is obtained with a less critical structure compared to other type of junctions. Moreover, using the scattering matrix approach, we have calculated a deviation of superconducting current-phase relation in such a SNIS Josephson junction from sinusoidal one and its effect on the current amplitudes of Shapiro steps as function of temperature. Measurement of the step dependence on temperature are also reported, where we considered the possibility of using bothn= 1 andn= 2 RF step above 4.2 K, for a possible reduction of the number of junctions in array circuits.

IEEE Transactions on Applied Superconductivity•Jun 1, 2009•27 citations

Overdamped Josephson junctions with Nb/AlOx/Al/AlOx/Nb structure for integrated circuit application

Masaaki Maezawa, Akira Shoji

We present characteristics of overdamped Josephson junctions consisting of Nb/AlOx/Al/ AlOx/Nb structures. The junctions were fabricated using a well-developed Nb/AlOx/Nb-junction technology and showed well-defined Josephson characteristics at 4.2 K. The characteristic voltage Vc [the product of the critical current Ic and the effective normal resistance Rn(eff)] of junctions, which determines high-frequency performance of the junction, was in the range of 0.1–0.5 mV, and the critical current density Jc in the range of 102–104 A/cm2. Maximum-to-minimum variations in Ic over a wafer were ±4% for junctions with Vc=0.15 mV and ±13% for junctions with Vc=0.5 mV.

Applied Physics Letters•Jun 30, 1997•68 citations

Improved Characteristics of Intrinsically Shunted ${\rm Nb/Al}-{\rm AlO}_{x}-{\rm Nb}$ Josephson Junctions

V. Lacquaniti, Natascia De Leo, Matteo Fretto +3 more

Josephson junctions with non-hysteretic current-voltage characteristics form the basis of most superconducting electronic circuits including RSFQ logic and programmable Josephson voltage standards. In contrast to conventional SIS devices, Nb/Al-AlOx-Nb (SNIS) junctions with an additional comparatively thick Al interlayer and a comparatively thin barrier AlOxare intrinsically shunted at T ≥ 4.2 K . In this contribution, we provide experimental and theoretical arguments proving that this finding is mainly explained by a broad distribution of highly-conductive barrier transparencies with a significant effect from nearly ballistic modes. An additional advantage of the proposed SNIS junctions is possibility to tune the critical voltage value by modifying Nb and/or Al film thicknesses. With observations of wide Shapiro steps up to 1.25 V at 6.3 K we show that this type of Josephson junctions can be successfully used at temperatures above 4.2 K. The presence of well-developed quantized voltage features even at 7.2 K means that Nb/Al-AlOx-Nb devices can successfully operate far above the liquid helium temperature and, in principle, are compatible with two-stage cryocoolers.

IEEE Transactions on Applied Superconductivity•Nov 9, 2010•2 citations

1 V programmable voltage standards based on SNIS Josephson junction series arrays

V. Lacquaniti, Natascia De Leo, Matteo Fretto +3 more

Binary-divided 1 V arrays were fabricated for programmable Josephson voltage standards in close cooperation between INRIM and PTB. The arrays, consisting of 8192 overdamped Nb/Al-AlO(x)Nb SNIS Josephson junctions, were successfully operated at microwave frequencies around 70 GHz. While the characteristic voltage of the junctions ranged from 0.25 to 0.6 mV, the current margins were larger than 1 mA for the Shapiro step n = 1. In addition, flat Shapiro steps of higher order (n = 3 and 4) were generated at increased microwave power levels due to the large characteristic voltage, demonstrating the small parameter spread of the SNIS junctions. Operation at temperatures up to 6-7 K has also been verified, measuring quantized voltages up to 1.25 V on the n = 1 step.

Superconductor Science and Technology•Jan 27, 2011•37 citations

Overdamped NbN Josephson Junctions Based on Nb/AlOx/Nb Trilayer Technology

Takao Iwai, Takashi Aoyama, Ryutaro Oke +3 more

We have fabricated overdamped NbN Josephson junctions based on Nb/AlO x /Nb trilayer technology. The junctions have the structure of NbN/Nb/AlO x /Nb/NbN, where Nb/AlO x /Nb acts as a junction barrier. The overdamped junctions showed a critical current density J c and characteristic voltage as high as 0.44 kA/cm2 and 160 µV at 10 K, respectively. The junction characteristics at 4.2 K were investigated from the viewpoint of their dependence on the film thickness of the Nb layers. The junction uniformity was also evaluated. The standard deviation, 1-σ, was 2.1% for a series of 64 5×5 µm2 junctions at 4.2 K.

Japanese Journal of Applied Physics•Aug 1, 1999•5 citations
Nb/Al-AlOx/Nb Josephson junctions of few micrometers size, derived by the basic hysteretic SIS process, have shown stable overdamped current voltage, I-V, characteristic with Ic of 1–10 mA and Vc of 100–600 μV at 4.2 K. The moderate dependence on temperature of these parameters has allowed to use them at temperatures above 4.2 K, near the Nb transition temperature, measuring quantized voltage steps several hundreds μA wide on single and 10 junctions arrays at T ≫ 8 K. This paves the way to their use in cryocooler setup of reduced cost and power consumption for a future generation of programmable and AC voltage standard.
Overdamped Nb/Al-AlOx/Nb Josephson junctions are an intermediate state between the SIS and SNS Josephson junctions. With a proper choice of fabrication parameters, stable and reproducible nonhysteretic curent-voltage characteristics have been obtained Featuring critical current densities up to 70 kA/cm2and characteristic voltages up to 450 μV at 4.2 K, overdamped junctions are suitable for many aplications ranging from RSFQ electronic circuits to programmable and ac voltage standards. Tests on single junctions arrays of series-connected junctions have shown a suitable behaviour when driven by a microwave with frequencies around 75 GHz. The quantized steps have proven to be stable and flat at nV level. These junctions also shown an improved temperature dependence, which can be interesting in view of the development instrumentation with an integrated quantum voltage reference operated in a closed cycle refrigerator.
Niobium-based junctions are still the best candidates for many small-scale applications of superconductivity and in particular, for the design and the fabrication of programmable voltage standards and D/A converters of fundamental accuracy. Non-hysteretic junctions with a large current density JC, and a reasonable characteristic voltage Vc are required, while, in order to make these circuits available to a wider market, operation at temperatures above 4.2 K would be important. In this work we report our results achieved on Nb/Al-AlOX/Nb junctions whose properties are studied in order to optimize the aforementioned features. Their behavior is analyzed showing how the overdamped characteristic is obtained with a less critical structure compared to other type of junctions. Moreover, using the scattering matrix approach, we have calculated a deviation of superconducting current-phase relation in such a SNIS Josephson junction from sinusoidal one and its effect on the current amplitudes of Shapiro steps as function of temperature. Measurement of the step dependence on temperature are also reported, where we considered the possibility of using bothn= 1 andn= 2 RF step above 4.2 K, for a possible reduction of the number of junctions in array circuits.
We present characteristics of overdamped Josephson junctions consisting of Nb/AlOx/Al/ AlOx/Nb structures. The junctions were fabricated using a well-developed Nb/AlOx/Nb-junction technology and showed well-defined Josephson characteristics at 4.2 K. The characteristic voltage Vc [the product of the critical current Ic and the effective normal resistance Rn(eff)] of junctions, which determines high-frequency performance of the junction, was in the range of 0.1–0.5 mV, and the critical current density Jc in the range of 102–104 A/cm2. Maximum-to-minimum variations in Ic over a wafer were ±4% for junctions with Vc=0.15 mV and ±13% for junctions with Vc=0.5 mV.
Improved Characteristics of Intrinsically Shunted Nb/Al−AlOx−Nb{\rm Nb/Al}-{\rm AlO}_{x}-{\rm Nb}Nb/Al−AlOx​−Nb Josephson Junctions
Josephson junctions with non-hysteretic current-voltage characteristics form the basis of most superconducting electronic circuits including RSFQ logic and programmable Josephson voltage standards. In contrast to conventional SIS devices, Nb/Al-AlOx-Nb (SNIS) junctions with an additional comparatively thick Al interlayer and a comparatively thin barrier AlOxare intrinsically shunted at T ≥ 4.2 K . In this contribution, we provide experimental and theoretical arguments proving that this finding is mainly explained by a broad distribution of highly-conductive barrier transparencies with a significant effect from nearly ballistic modes. An additional advantage of the proposed SNIS junctions is possibility to tune the critical voltage value by modifying Nb and/or Al film thicknesses. With observations of wide Shapiro steps up to 1.25 V at 6.3 K we show that this type of Josephson junctions can be successfully used at temperatures above 4.2 K. The presence of well-developed quantized voltage features even at 7.2 K means that Nb/Al-AlOx-Nb devices can successfully operate far above the liquid helium temperature and, in principle, are compatible with two-stage cryocoolers.
Binary-divided 1 V arrays were fabricated for programmable Josephson voltage standards in close cooperation between INRIM and PTB. The arrays, consisting of 8192 overdamped Nb/Al-AlO(x)Nb SNIS Josephson junctions, were successfully operated at microwave frequencies around 70 GHz. While the characteristic voltage of the junctions ranged from 0.25 to 0.6 mV, the current margins were larger than 1 mA for the Shapiro step n = 1. In addition, flat Shapiro steps of higher order (n = 3 and 4) were generated at increased microwave power levels due to the large characteristic voltage, demonstrating the small parameter spread of the SNIS junctions. Operation at temperatures up to 6-7 K has also been verified, measuring quantized voltages up to 1.25 V on the n = 1 step.
We have fabricated overdamped NbN Josephson junctions based on Nb/AlO x /Nb trilayer technology. The junctions have the structure of NbN/Nb/AlO x /Nb/NbN, where Nb/AlO x /Nb acts as a junction barrier. The overdamped junctions showed a critical current density J c and characteristic voltage as high as 0.44 kA/cm2 and 160 µV at 10 K, respectively. The junction characteristics at 4.2 K were investigated from the viewpoint of their dependence on the film thickness of the Nb layers. The junction uniformity was also evaluated. The standard deviation, 1-σ, was 2.1% for a series of 64 5×5 µm2 junctions at 4.2 K.