Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

International Workshop on Advances in Sensors and Interfaces (IWASI)

Overdamped Josephson junctions for applications to precision measurement

V. Lacquaniti, Domenico Andreone, Matteo Fretto, Natascia De Leo, Sabino Maggi, F. Francone, Roberto Rocci, Danilo Serazio, A. Sosso

Published Jan 1, 2007• 0 citations
Publisher

Abstract

Overdamped Nb/Al-AlOx/Nb Josephson junctions are an intermediate state between the SIS and SNS Josephson junctions. With a proper choice of fabrication parameters, stable and reproducible nonhysteretic curent-voltage characteristics have been obtained Featuring critical current densities up to 70 kA/cm2and characteristic voltages up to 450 μV at 4.2 K, overdamped junctions are suitable for many aplications ranging from RSFQ electronic circuits to programmable and ac voltage standards. Tests on single junctions arrays of series-connected junctions have shown a suitable behaviour when driven by a microwave with frequencies around 75 GHz. The quantized steps have proven to be stable and flat at nV level. These junctions also shown an improved temperature dependence, which can be interesting in view of the development instrumentation with an integrated quantum voltage reference operated in a closed cycle refrigerator.

DOI
10.1109/iwasi.2007.4420046

Related papers

Nb/Al-AlOx/Nb overdamped junctions suitable for voltage standard operation above 4.2 K

V. Lacquaniti, Natascia De Leo, Matteo Fretto +1 more

Nb/Al-AlOx/Nb Josephson junctions of few micrometers size, derived by the basic hysteretic SIS process, have shown stable overdamped current voltage, I-V, characteristic with Ic of 1–10 mA and Vc of 100–600 μV at 4.2 K. The moderate dependence on temperature of these parameters has allowed to use them at temperatures above 4.2 K, near the Nb transition temperature, measuring quantized voltage steps several hundreds μA wide on single and 10 junctions arrays at T ≫ 8 K. This paves the way to their use in cryocooler setup of reduced cost and power consumption for a future generation of programmable and AC voltage standard.

Conference on Precision Electromagnetic Measurements•Jun 1, 2008•0 citations

Engineering Overdamped Niobium-Based Josephson Junctions for Operation Above 4.2 K

V. Lacquaniti, Domenico Andreone, Natascia De Leo +3 more

Niobium-based junctions are still the best candidates for many small-scale applications of superconductivity and in particular, for the design and the fabrication of programmable voltage standards and D/A converters of fundamental accuracy. Non-hysteretic junctions with a large current density JC, and a reasonable characteristic voltage Vc are required, while, in order to make these circuits available to a wider market, operation at temperatures above 4.2 K would be important. In this work we report our results achieved on Nb/Al-AlOX/Nb junctions whose properties are studied in order to optimize the aforementioned features. Their behavior is analyzed showing how the overdamped characteristic is obtained with a less critical structure compared to other type of junctions. Moreover, using the scattering matrix approach, we have calculated a deviation of superconducting current-phase relation in such a SNIS Josephson junction from sinusoidal one and its effect on the current amplitudes of Shapiro steps as function of temperature. Measurement of the step dependence on temperature are also reported, where we considered the possibility of using bothn= 1 andn= 2 RF step above 4.2 K, for a possible reduction of the number of junctions in array circuits.

IEEE Transactions on Applied Superconductivity•Jun 1, 2009•27 citations

Overdamped Josephson junctions with Nb/AlOx/Al/AlOx/Nb structure for integrated circuit application

Masaaki Maezawa, Akira Shoji

We present characteristics of overdamped Josephson junctions consisting of Nb/AlOx/Al/ AlOx/Nb structures. The junctions were fabricated using a well-developed Nb/AlOx/Nb-junction technology and showed well-defined Josephson characteristics at 4.2 K. The characteristic voltage Vc [the product of the critical current Ic and the effective normal resistance Rn(eff)] of junctions, which determines high-frequency performance of the junction, was in the range of 0.1–0.5 mV, and the critical current density Jc in the range of 102–104 A/cm2. Maximum-to-minimum variations in Ic over a wafer were ±4% for junctions with Vc=0.15 mV and ±13% for junctions with Vc=0.5 mV.

Applied Physics Letters•Jun 30, 1997•68 citations

Overdamped NbN Josephson Junctions Based on Nb/AlOx/Nb Trilayer Technology

Takao Iwai, Takashi Aoyama, Ryutaro Oke +3 more

We have fabricated overdamped NbN Josephson junctions based on Nb/AlO x /Nb trilayer technology. The junctions have the structure of NbN/Nb/AlO x /Nb/NbN, where Nb/AlO x /Nb acts as a junction barrier. The overdamped junctions showed a critical current density J c and characteristic voltage as high as 0.44 kA/cm2 and 160 µV at 10 K, respectively. The junction characteristics at 4.2 K were investigated from the viewpoint of their dependence on the film thickness of the Nb layers. The junction uniformity was also evaluated. The standard deviation, 1-σ, was 2.1% for a series of 64 5×5 µm2 junctions at 4.2 K.

Japanese Journal of Applied Physics•Aug 1, 1999•5 citations

Superconductor-normal metal-superconductor Josephson junctions with Ti interlayer

Ludwig Fritzsch, M. Schubert, G. Wende +1 more

Single nonhysteretic superconductor-metal-superconductor Josephson junctions consisting of Nb-Ti-Nb were prepared using the well-known anodization process for the isolation of the junctions. The 4×4 μm2 junctions show overdamped Josephson current-voltage characteristics at 4.2 K. The characteristic voltage IcRn is about 8.0 μV at a critical current density jc of about 29 kA/cm2. Under the influence of 10.5 GHz microwave irradiation the constant-voltage steps of n=0 and ±1 are observed with current amplitudes of about 3 mA.

Applied Physics Letters•Sep 14, 1998•20 citations

Assessment of Overdamped SNS Niobium-Based Josephson Junctions for Digital Applications

V. Lacquaniti, N. de Leo, M. Fretto +4 more

SNS Nb/Al-AlOx/Nb Josephson junctions have been recently developed with Al layer thicknesses 30- 100 nm , for which non-hysteretic I-V characteristics have been obtained by oxidation ranging from 150 to 200 Pa.s. The Stewart-McCumber parameter of the junctions can be lower or higher than unity, depending on the above-mentioned conditions. Typical Jc values of several tens of kA/cm2 and RnIc values up to 0.5-0.7 mV at 4.2 K have been obtained, suitable for digital applications. Two interesting features of this technology are: i) the absence of external shunt resistance that can allow higher integration and; ii) the reproducibility of technological parameters that is connected to a least dependence of the Josephson critical current on the barrier thickness. In this work, we will present a detailed analysis of speed and jitter that can be expected from basic digital circuits based on such a technology. This analysis is based on the accurate experimental extraction of typical quantities, like the Stewart-McCumber parameter or specific capacitance. In particular, the influence of the temperature of operation on the performance of elementary cells will be assessed. A comparisonwith similar cells based on externally-shunted Josephson junctions will be presented in order to evaluate the ranges of parameters for which this technology exhibits some clear advantages. In particular we will show the technological constraints that need to be met in order to build circuits that can compete with existing technologies

•Aug 17, 2008•0 citations
Overdamped Nb/Al-AlOx/Nb Josephson junctions are an intermediate state between the SIS and SNS Josephson junctions. With a proper choice of fabrication parameters, stable and reproducible nonhysteretic curent-voltage characteristics have been obtained Featuring critical current densities up to 70 kA/cm2and characteristic voltages up to 450 μV at 4.2 K, overdamped junctions are suitable for many aplications ranging from RSFQ electronic circuits to programmable and ac voltage standards. Tests on single junctions arrays of series-connected junctions have shown a suitable behaviour when driven by a microwave with frequencies around 75 GHz. The quantized steps have proven to be stable and flat at nV level. These junctions also shown an improved temperature dependence, which can be interesting in view of the development instrumentation with an integrated quantum voltage reference operated in a closed cycle refrigerator.
Nb/Al-AlOx/Nb Josephson junctions of few micrometers size, derived by the basic hysteretic SIS process, have shown stable overdamped current voltage, I-V, characteristic with Ic of 1–10 mA and Vc of 100–600 μV at 4.2 K. The moderate dependence on temperature of these parameters has allowed to use them at temperatures above 4.2 K, near the Nb transition temperature, measuring quantized voltage steps several hundreds μA wide on single and 10 junctions arrays at T ≫ 8 K. This paves the way to their use in cryocooler setup of reduced cost and power consumption for a future generation of programmable and AC voltage standard.
Niobium-based junctions are still the best candidates for many small-scale applications of superconductivity and in particular, for the design and the fabrication of programmable voltage standards and D/A converters of fundamental accuracy. Non-hysteretic junctions with a large current density JC, and a reasonable characteristic voltage Vc are required, while, in order to make these circuits available to a wider market, operation at temperatures above 4.2 K would be important. In this work we report our results achieved on Nb/Al-AlOX/Nb junctions whose properties are studied in order to optimize the aforementioned features. Their behavior is analyzed showing how the overdamped characteristic is obtained with a less critical structure compared to other type of junctions. Moreover, using the scattering matrix approach, we have calculated a deviation of superconducting current-phase relation in such a SNIS Josephson junction from sinusoidal one and its effect on the current amplitudes of Shapiro steps as function of temperature. Measurement of the step dependence on temperature are also reported, where we considered the possibility of using bothn= 1 andn= 2 RF step above 4.2 K, for a possible reduction of the number of junctions in array circuits.
We present characteristics of overdamped Josephson junctions consisting of Nb/AlOx/Al/ AlOx/Nb structures. The junctions were fabricated using a well-developed Nb/AlOx/Nb-junction technology and showed well-defined Josephson characteristics at 4.2 K. The characteristic voltage Vc [the product of the critical current Ic and the effective normal resistance Rn(eff)] of junctions, which determines high-frequency performance of the junction, was in the range of 0.1–0.5 mV, and the critical current density Jc in the range of 102–104 A/cm2. Maximum-to-minimum variations in Ic over a wafer were ±4% for junctions with Vc=0.15 mV and ±13% for junctions with Vc=0.5 mV.
We have fabricated overdamped NbN Josephson junctions based on Nb/AlO x /Nb trilayer technology. The junctions have the structure of NbN/Nb/AlO x /Nb/NbN, where Nb/AlO x /Nb acts as a junction barrier. The overdamped junctions showed a critical current density J c and characteristic voltage as high as 0.44 kA/cm2 and 160 µV at 10 K, respectively. The junction characteristics at 4.2 K were investigated from the viewpoint of their dependence on the film thickness of the Nb layers. The junction uniformity was also evaluated. The standard deviation, 1-σ, was 2.1% for a series of 64 5×5 µm2 junctions at 4.2 K.
Single nonhysteretic superconductor-metal-superconductor Josephson junctions consisting of Nb-Ti-Nb were prepared using the well-known anodization process for the isolation of the junctions. The 4×4 μm2 junctions show overdamped Josephson current-voltage characteristics at 4.2 K. The characteristic voltage IcRn is about 8.0 μV at a critical current density jc of about 29 kA/cm2. Under the influence of 10.5 GHz microwave irradiation the constant-voltage steps of n=0 and ±1 are observed with current amplitudes of about 3 mA.
SNS Nb/Al-AlOx/Nb Josephson junctions have been recently developed with Al layer thicknesses 30- 100 nm , for which non-hysteretic I-V characteristics have been obtained by oxidation ranging from 150 to 200 Pa.s. The Stewart-McCumber parameter of the junctions can be lower or higher than unity, depending on the above-mentioned conditions. Typical Jc values of several tens of kA/cm2 and RnIc values up to 0.5-0.7 mV at 4.2 K have been obtained, suitable for digital applications. Two interesting features of this technology are: i) the absence of external shunt resistance that can allow higher integration and; ii) the reproducibility of technological parameters that is connected to a least dependence of the Josephson critical current on the barrier thickness. In this work, we will present a detailed analysis of speed and jitter that can be expected from basic digital circuits based on such a technology. This analysis is based on the accurate experimental extraction of typical quantities, like the Stewart-McCumber parameter or specific capacitance. In particular, the influence of the temperature of operation on the performance of elementary cells will be assessed. A comparisonwith similar cells based on externally-shunted Josephson junctions will be presented in order to evaluate the ranges of parameters for which this technology exhibits some clear advantages. In particular we will show the technological constraints that need to be met in order to build circuits that can compete with existing technologies