IEEE Transactions on Applied Superconductivity

Operation of Toggle Flip-Flop Circuits Up to 500 GHz Based on Vertically-Stacked High-Temperature Superconductor Josephson Junctions

Taishi Kimura, Kemmei Kajino, Makoto Watanabe, Y. Horii, M. Inoue, Akira Fujimaki

Published Jun 1, 2009• 7 citations

Abstract

We report a developed single-flux-quantum (SFQ) circuit fabrication process for vertically-stacked interface-treated Josephson junctions by using high-temperature superconductor (HTS) and also report the 500 GHz operation of a toggle flip-flop (TFF). As the first trial of the circuit operation, we fabricated TFF circuits, because TFF is used as a benchmark circuit to indicate potential of the circuit operating speed. To develop the circuit fabrication process, we utilized the counter YBCO layer as a wiring layer. We obtained resistively-shunted-junction behavior of single junction fabricated by new process. In addition, we observed current-voltage characteristics at the input port and the output port of the TFF, and confirmed that the input voltage coincided with twice the output voltage up to 1.1 mV at 4.2 K, which corresponds to the correct operation up to 500 GHz. This frequency is the highest value in HTS circuits ever observed, which suggests the high potential of the vertically-stacked JJs for the circuit operation.

DOI: 10.1109/tasc.2009.2018252

Related papers

Superconducting MgB2 rapid single flux quantum toggle flip flop circuit

Daniel Cunnane, Ke Chen, X. X. Xi

Using self-shunted MgB2/MgO/MgB2 Josephson junctions, we have designed, fabricated, and tested a rapid single flux quantum toggle flip flop (TFF) circuit. The junctions used MgB2 films grown by hybrid physical-chemical vapor deposition with MgO barrier layer and insulating layer deposited by RF magnetron sputtering. The result showed the frequency-division function of the TFF circuit, evidenced by the output voltage being half the input voltage, up to 63 GHz at 20 K and 180 GHz at 3.2 K, which demonstrates the potential of high operating speeds and high working temperatures in MgB2 superconducting integrated circuits.

Applied Physics LettersJun 3, 201313 citations

Characterization of HTS SFQ circuits using interface-engineered Josephson junctions

K. Saitoh, Yoshihisa Soutome, Tokuumi Fukazawa +2 more

We fabricated and tested high-temperature superconducting (HTS) rapid-single-flux-quantum (RSFQ) circuits using interface-engineered Josephson junction (IEJ). The characteristics of high-speed operation were examined by voltage-divider operation based on the toggle-flip-flop circuit. An operation at 155 GHz was obtained at 15 K and the proper functioning of the voltage divider was observed up to 27 K. Temperature dependence of the maximum operation speed was analyzed by circuit simulation with thermal-noise sources. To achieve higher speed operation using a Josephson junction with a higher I/sub c/R/sub n/ product, we also fabricated an RSFQ balanced comparator using IEJ; proper switching characteristics of the circuit was confirmed up to 190 GHz at 30 K. The bias condition dependencies were studied based on the circuit simulations in the relationship of the I/sub c/R/sub n/ product. The results of circuit simulation indicate that a Josephson junction with an I/sub c/R/sub n/ product of more than 0.7 mV is required for high-speed operation (100 GHz) in high-temperature range (30-40 K). We believe that the IEJ is a promising junction candidate for realizing high-speed operation in a high-temperature range.

IEEE Transactions on Applied SuperconductivityMar 1, 200117 citations

Fabrication and voltage divider operation of a T flip-flop using high-Tc interface-engineered Josephson junctions

Jun-Ho Kim, Sang‐Hyeob Kim, Gun Yong Sung

We designed and fabricated a rapid-single-flux-quantum T flip-flop (TFF) with high- T c interface-engineered Josephson junctions. Y 1 Ba 2 Cu 3 O 7− d and Sr 2 AlTaO 6 were deposited for the superconducting layer and the insulating layer, respectively. The Josephson junction was formed through an interface treatment process using Ar ion milling and vacuum annealing. We simulated a TFF circuit and designed a physical layout using WRspice and Xic. The fabricated TFF has a minimum junction width of 3 μm. Through the measurement of the voltage divider operation, the maximum operation frequency was estimated to be 53 GHz at 22 K and 106 GHz at 12 K.

Superconductor Science and TechnologyAug 2, 20023 citations

Rapid single flux quantum T-flip flop operating up to 770 GHz

W. Chen, Alexander V. Rylyakov, Vijay Patel +2 more

Rapid Single Flux Quantum (RSFQ) T-flip flops (TFFs) operating up to 770 GHz have been demonstrated at 4.2 K. The devices, consisting of either resistively shunted or unshunted Josephson junctions, are fabricated using a planarized Nb/AlO/sub x//Nb trilayer process. Electron beam lithography is used to pattern all levels with a minimum junction area less than 0.1 /spl mu/m/sup 2/. Critical current densities of 0.5 mA//spl mu/m/sup 2/ and 2.5 mA//spl mu/m/sup 2/ are used for the shunted (tested at 1.8 K) and unshunted devices (tested at 4.2 K) respectively. The input and output frequencies of the TFFs are obtained from the input and output voltages by the Josephson relation. The output voltage is exactly half of the input voltage when the divide-by-two operation is correct.

IEEE Transactions on Applied SuperconductivityJun 1, 1999277 citations

Operation of HTS Toggle-Flip-Flop Circuit With Improved Layout Design

Koji Tsubone, H. Wakana, Yoshinobu Tarutani +4 more

Toggle-flip-flop (T-FF) is one of the most important high-Tcsuperconducting single-flux quantum (HTS SFQ) circuit components and has been designed and fabricated by using YBa2Cu3O7-deltaramp-edge junction technology. The circuit layout of the T-FF was improved to suppress the junction critical current (Ic) spread in the circuit. Test circuits, which include a T-FF with a single output for evaluating the logic operation and measuring the operating frequency, were fabricated and their operation characteristics were investigated. The T-FF circuit with a single output was successfully operated and finite direct current (dc) supply current margins were obtained at temperatures from 27 to 34 K. Moreover, the maximum operating frequency of the T-FF was estimated to be 360 GHz at 4.2 K and 114 GHz at 41 K. In addition, reduction of dc supply current margins due to thermal noise was also investigated. According to the numerical simulation in which parasitic inductances were taken into account, the narrowest margin in the T-FF circuit wider than plusmn10% was maintained with a bit-error rate (BER) of 10-6up to 40 K

IEEE Transactions on Applied SuperconductivityDec 1, 200615 citations

HTS SFQ T-flip flop with directly coupled readout

A. G. Sun, D.J. Durand, James M. Murduck +4 more

The authors report the design, fabrication, and test results of single flux quantum (SFQ) toggle flip flop circuits. These circuits, investigated as building blocks of an HTS counting ADC, feature a directly coupled readout junction stack similar to those used in LTS RSFQ circuits. The directly coupled circuit delivers higher readout voltage, hence potentially higher operating speed than magnetically coupled alternatives. The circuits were fabricated using two multilayer HTS SNS junction integrated circuit technologies (one at Northrop Grumman and the other at TRW) featuring three YBCO depositions. Initial testing demonstrated toggling of a T-flip flop in response to SFQ pulses generated by integrated dc/SFQ converters. The readout voltage is shown to approach 40% of the junction I/sub C/R/sub N/ product, and as high as 100 /spl mu/V at 65K. Test results are compared with predicted fabrication process parameter requirements. To increase margins and tolerance to process parameter variations, improvements to the design have been made using JSpice and MALT.

IEEE Transactions on Applied SuperconductivityJun 1, 199914 citations