Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Transactions on Applied Superconductivity

Construction of an RSFQ 4-Bit ALU With Half Adder Cells

J.Y. Kim, Soontae Kim, J.H. Kang

Published Jun 1, 2005• 17 citations
Publisher

Abstract

As part of the effort to develop a superconductive microprocessor, we constructed a rapid single flux quantum (RSFQ) 4-bit arithmetic and logic unit (ALU) in a pipelined structure. To speed up the circuit, we used a forward clocking scheme. The 4-bit ALU consisted of ten RSFQ Half Adders, four 2 /spl times/ 2 switches, and several D flip-flops. By commutating output ports of the half adder, we were able to produce AND, OR, XOR, and ADD functions. The 4-bit ALU was fabricated using the Korea Photonics Technology Institute's ten-level 1.0 kA/cm/sup 2/ Nb process. The size of the ALU was 3.0 mm /spl times/ 1.5 mm, fitting in a 5 mm /spl times/ 5 mm chip. The fabricated 1-bit ALU block was successfully tested at up to a 40 GHz clock frequency. The complete 4-bit ALU operated correctly at up to a 5 GHz clock frequency.

DOI
10.1109/tasc.2005.849810

Related papers

Timing analysis of RSFQ ALU circuit for the development of superconductive microprocessor

Kim J. Y, Seokhyeon Baek, S H Kim +1 more

We have constructed an RSFQ 4-bit Arithmetic Logic Unit (ALU) in a pipelined structure. An ALU is a core element of a computer processor that performs arithmetic and logic operation on the operands in computer instruction words. We have simulated the circuit by using Josephson circuit simulation tools. We used simulation tools of XIC, , and Julia. To make the circuit work faster, we used a forward clocking scheme. This required a careful design of timing between clock and data pulses in ALU. The RSFQ 1-bit block of ALU used in constructing the 4-bit ALU was consisted of three DC current driven SFQ switches and a half-adder. By commutating output ports of the half adder, we could produce AND, OR, XOR, or ADD functions. The circuit size of the 4-bit ALU when fabricated was 3 mm x 1.5 mm, fitting in a 5 mm x 5mm chip. The fabricated 4-bit ALU operated correctly at 5 GHz clock frequency. The chip was tested at the liquid-helium temperature.

Progress in Superconductivity and Cryogenics•Jan 1, 2005•0 citations

A rapid single flux quantum 1 bit arithmetic logic unit constructed with a half-adder cell

Ku-Rak Jung, J Y Kim, J.H. Kang +3 more

We have designed, fabricated, and tested a rapid single flux quantum (RSFQ) 1 bit arithmetic logic unit (ALU) block. The circuit consists of three DC current driven SFQ switches and a half-adder. We successfully tested the half-adder cell at clock frequency up to 20 GHz. The switches were commutating output ports of the half-adder to produce AND, OR, XOR, or ADD functions. For a high-speed test, we attached two switches at the input ports of the half-adder to control the high-speed input data by low-frequency pattern generators. The output in this measurement was an eye-diagram. Using this set-up, the circuit was successfully tested up to 20 GHz. The chip was fabricated using a standard HYPRES 1 kA cm −2 Nb Josephson junction fabrication process.

Superconductor Science and Technology•Apr 2, 2004•3 citations

4-bit Bit-Slice Arithmetic Logic Unit for 32-bit RSFQ Microprocessors

Guang-Ming Tang, Takata Kensuke, Masamitsu Tanaka +3 more

A 4-bit bit-slice arithmetic logic unit (ALU) for 32-bit rapid single-flux-quantum microprocessors was demonstrated. The proposed ALU covers all of the ALU operations for the MIPS32 instruction set. It processes bit-sliced 32-bit data that are divided into eight slices of 4 bits. The bit-slice approach simplifies the circuit structure and reduces the hardware cost. The ALU uses synchronous concurrent-flow clocking and consists of eight pipeline stages. It was implemented using the 1.0-μm Nb/AlOx/Nb nine-layer advanced process 2 (ADP2) with a critical current density of 10 kA/cm2, and fabricated by National Institute of Advanced Industrial Science and Technology (AIST). It consists of 3481 Josephson junctions with an area of 3.09 × 1.66 mm2. It achieved the target frequency of 50 GHz and a latency of 524 ps for a 32-bit operation, at the designed DC bias voltage of 2.5 mV, via precise control of interconnect delays and clock distribution. Furthermore, it achieved a throughput of 6.25 × 10932-bit operations per second. All the correct ALU operations with measured DC bias voltage margins of around 10% at 50 GHz were successfully obtained. The proposed ALU can be used for any 4n-bit processing.

IEEE Transactions on Applied Superconductivity•Dec 10, 2015•64 citations

80-GHz Operation of an 8-Bit RSFQ Arithmetic Logic Unit

Yuki Ando, Ryo Sato, Masamitsu Tanaka +2 more

We have designed and demonstrated an arithmetic logic unit (ALU) based on rapid single-flux-quantum (RSFQ) technology. The ALU has been developed toward demonstration of high-performance information processing using a general purpose microprocessor CORE e4. The target operation frequency of the ALU is 50 GHz. In this paper, we present the design and high- speed functionality test results of the ALU. The ALU can execute 10 instructions. We aimed at high frequency operation with precise timing design using logic gates synchronized to the clock signal. The ALU contains 1555 Josephson junctions (JJs) and occupies a circuit area of 0.53mm2. We have demonstrated the correct operation of the ALU using on-chip high-speed test. The estimated maximum operating frequency based on measurement results is 80 GHz.

IEEE International Superconductive Electronics Conference (ISEC)•Jul 1, 2015•21 citations

8-Bit Asynchronous Sparse-Tree Superconductor RSFQ Arithmetic-Logic Unit With a Rich Set of Operations

M. Dorojevets, Christopher Lawrence Ayala, Nobuyuki Yoshikawa +1 more

This paper describes the design and testing of an 8-bit asynchronous wave-pipelined sparse-tree Rapid Single Flux Quantum (RSFQ) Arithmetic Logic Unit (ALU). Compared to previously developed RSFQ ALUs, this unit features an extensive set of 8 arithmetic and 12 logical operations. The execution of ALU operations consists of two steps. First, when necessary, one or both operands are inverted, and then operations are performed on these pre-processed data. Unlike the RSFQ Kogge-Stone-based designs, our parallel-prefix sparse-tree ALU has significantly reduced circuit complexity while maintaining robust operational margins at high frequency. An 8-bit ALU has been implemented with the International Superconductivity Technology Center (ISTEC) 10 kA/cm21.0 μm 9-metal ADP2.1 fabrication process as a joint effort between Stony Brook University, Yokohama National University, and Nagoya University. Using the CONNECT cell library and SFQ CAD tools developed at Nagoya and Yokohama, the Stony Brook team has developed a complete logical and physical design of the ALU chip. The 8-bit ALU core (without SFQ-to-dc and dc-to-SFQ converters) consists of 8832 Josephson junctions with an area of 7.2 mm2. Simulations show that the ALU can operate at the maximum rate of 42 GHz. It has the latency of 374 ps at a bias voltage of 2.5 mV. The chip was fabricated and tested at low frequency in 2012. Testing results showed malfunctioning of some gates but despite these shortcomings we still verified several ALU operations with the measured DC bias voltage margins of ±1.8%.

IEEE Transactions on Applied Superconductivity•Nov 21, 2012•35 citations

ARCHITECTURE AND DESIGN OF AN 8-BIT FLUX-1 SUPERCONDUCTOR RSFQ MICROPROCESSOR

M. Dorojevets

The first single-chip superconductor FLUX-1 microprocessor has been designed in the Rapid Single Flux Quantum (RSFQ) logic and fabricated using 4 kA/cm2, 1.75-μm Nb/AlOx/Nb Josephson junction technology as a result of the collaboration between SUNY Stony Brook and TRW, Inc. A FLUX-1 chip represents an 8-bit deeply pipelined microprocessor prototype with a target clock frequency of 17-20 GHz. A new parallel partitioned architecture has been developed in order to tolerate interconnect delays and fill long FLUX-1 processor pipelines with useful instructions. The processor includes the 16 × 32-bit pipelined instruction memory, 8 integer arithmetic-logic units interleaved with 8 registers, the branch unit, and I/O ports for 5-GHz chip-to-chip communication over Nb microstrip lines on a chip carrier. The FLUX-1 instruction set consists of ~25 arithmetic, logical, and control instructions. A FLUX-1 microprocessor chip contains 65,759 Josephson junctions on a 10.6 mm × 13.2 mm die with flip-chip packaging. First FLUX-1 chips fabricated in August 2001 are currently under testing at TRW, Inc.

International Journal of High Speed Electronics and Systems•Jun 1, 2002•8 citations
As part of the effort to develop a superconductive microprocessor, we constructed a rapid single flux quantum (RSFQ) 4-bit arithmetic and logic unit (ALU) in a pipelined structure. To speed up the circuit, we used a forward clocking scheme. The 4-bit ALU consisted of ten RSFQ Half Adders, four 2 /spl times/ 2 switches, and several D flip-flops. By commutating output ports of the half adder, we were able to produce AND, OR, XOR, and ADD functions. The 4-bit ALU was fabricated using the Korea Photonics Technology Institute's ten-level 1.0 kA/cm/sup 2/ Nb process. The size of the ALU was 3.0 mm /spl times/ 1.5 mm, fitting in a 5 mm /spl times/ 5 mm chip. The fabricated 1-bit ALU block was successfully tested at up to a 40 GHz clock frequency. The complete 4-bit ALU operated correctly at up to a 5 GHz clock frequency.
We have constructed an RSFQ 4-bit Arithmetic Logic Unit (ALU) in a pipelined structure. An ALU is a core element of a computer processor that performs arithmetic and logic operation on the operands in computer instruction words. We have simulated the circuit by using Josephson circuit simulation tools. We used simulation tools of XIC, , and Julia. To make the circuit work faster, we used a forward clocking scheme. This required a careful design of timing between clock and data pulses in ALU. The RSFQ 1-bit block of ALU used in constructing the 4-bit ALU was consisted of three DC current driven SFQ switches and a half-adder. By commutating output ports of the half adder, we could produce AND, OR, XOR, or ADD functions. The circuit size of the 4-bit ALU when fabricated was 3 mm x 1.5 mm, fitting in a 5 mm x 5mm chip. The fabricated 4-bit ALU operated correctly at 5 GHz clock frequency. The chip was tested at the liquid-helium temperature.
We have designed, fabricated, and tested a rapid single flux quantum (RSFQ) 1 bit arithmetic logic unit (ALU) block. The circuit consists of three DC current driven SFQ switches and a half-adder. We successfully tested the half-adder cell at clock frequency up to 20 GHz. The switches were commutating output ports of the half-adder to produce AND, OR, XOR, or ADD functions. For a high-speed test, we attached two switches at the input ports of the half-adder to control the high-speed input data by low-frequency pattern generators. The output in this measurement was an eye-diagram. Using this set-up, the circuit was successfully tested up to 20 GHz. The chip was fabricated using a standard HYPRES 1 kA cm −2 Nb Josephson junction fabrication process.
A 4-bit bit-slice arithmetic logic unit (ALU) for 32-bit rapid single-flux-quantum microprocessors was demonstrated. The proposed ALU covers all of the ALU operations for the MIPS32 instruction set. It processes bit-sliced 32-bit data that are divided into eight slices of 4 bits. The bit-slice approach simplifies the circuit structure and reduces the hardware cost. The ALU uses synchronous concurrent-flow clocking and consists of eight pipeline stages. It was implemented using the 1.0-μm Nb/AlOx/Nb nine-layer advanced process 2 (ADP2) with a critical current density of 10 kA/cm2, and fabricated by National Institute of Advanced Industrial Science and Technology (AIST). It consists of 3481 Josephson junctions with an area of 3.09 × 1.66 mm2. It achieved the target frequency of 50 GHz and a latency of 524 ps for a 32-bit operation, at the designed DC bias voltage of 2.5 mV, via precise control of interconnect delays and clock distribution. Furthermore, it achieved a throughput of 6.25 × 10932-bit operations per second. All the correct ALU operations with measured DC bias voltage margins of around 10% at 50 GHz were successfully obtained. The proposed ALU can be used for any 4n-bit processing.
We have designed and demonstrated an arithmetic logic unit (ALU) based on rapid single-flux-quantum (RSFQ) technology. The ALU has been developed toward demonstration of high-performance information processing using a general purpose microprocessor CORE e4. The target operation frequency of the ALU is 50 GHz. In this paper, we present the design and high- speed functionality test results of the ALU. The ALU can execute 10 instructions. We aimed at high frequency operation with precise timing design using logic gates synchronized to the clock signal. The ALU contains 1555 Josephson junctions (JJs) and occupies a circuit area of 0.53mm2. We have demonstrated the correct operation of the ALU using on-chip high-speed test. The estimated maximum operating frequency based on measurement results is 80 GHz.
This paper describes the design and testing of an 8-bit asynchronous wave-pipelined sparse-tree Rapid Single Flux Quantum (RSFQ) Arithmetic Logic Unit (ALU). Compared to previously developed RSFQ ALUs, this unit features an extensive set of 8 arithmetic and 12 logical operations. The execution of ALU operations consists of two steps. First, when necessary, one or both operands are inverted, and then operations are performed on these pre-processed data. Unlike the RSFQ Kogge-Stone-based designs, our parallel-prefix sparse-tree ALU has significantly reduced circuit complexity while maintaining robust operational margins at high frequency. An 8-bit ALU has been implemented with the International Superconductivity Technology Center (ISTEC) 10 kA/cm21.0 μm 9-metal ADP2.1 fabrication process as a joint effort between Stony Brook University, Yokohama National University, and Nagoya University. Using the CONNECT cell library and SFQ CAD tools developed at Nagoya and Yokohama, the Stony Brook team has developed a complete logical and physical design of the ALU chip. The 8-bit ALU core (without SFQ-to-dc and dc-to-SFQ converters) consists of 8832 Josephson junctions with an area of 7.2 mm2. Simulations show that the ALU can operate at the maximum rate of 42 GHz. It has the latency of 374 ps at a bias voltage of 2.5 mV. The chip was fabricated and tested at low frequency in 2012. Testing results showed malfunctioning of some gates but despite these shortcomings we still verified several ALU operations with the measured DC bias voltage margins of ±1.8%.
The first single-chip superconductor FLUX-1 microprocessor has been designed in the Rapid Single Flux Quantum (RSFQ) logic and fabricated using 4 kA/cm2, 1.75-μm Nb/AlOx/Nb Josephson junction technology as a result of the collaboration between SUNY Stony Brook and TRW, Inc. A FLUX-1 chip represents an 8-bit deeply pipelined microprocessor prototype with a target clock frequency of 17-20 GHz. A new parallel partitioned architecture has been developed in order to tolerate interconnect delays and fill long FLUX-1 processor pipelines with useful instructions. The processor includes the 16 × 32-bit pipelined instruction memory, 8 integer arithmetic-logic units interleaved with 8 registers, the branch unit, and I/O ports for 5-GHz chip-to-chip communication over Nb microstrip lines on a chip carrier. The FLUX-1 instruction set consists of ~25 arithmetic, logical, and control instructions. A FLUX-1 microprocessor chip contains 65,759 Josephson junctions on a 10.6 mm × 13.2 mm die with flip-chip packaging. First FLUX-1 chips fabricated in August 2001 are currently under testing at TRW, Inc.