Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Transactions on Applied Superconductivity

Switching delay of a nonlatching Josephson gate evaluated from ring oscillator operation

Yoshinao Mizugaki, Kensuke Nakajima, Alexandre Shoji

Published Jan 1, 1998• 2 citations
Publisher

Abstract

The authors present the experimental results for the switching delay of a dc-biased nonlatching Josephson gate (a coupled-superconducting quantum interference device gate). The measurement is executed by the use of a ring oscillator (RO) method. A frequency-to-voltage converter is used to evaluate the oscillation frequency of the RO. The circuit is designed and fabricated using a 2.5-kA/cm/sup 2/ Nb/AlO/sub x//Nb Josephson junction technology. The results show the minimum switching delay of 18 ps.

DOI
10.1109/77.740684

Related papers

Experimental operation of an RS flip-flop composed of nonlatching Josephson gates

Yoshinao Mizugaki, Takeshi Onomi, Kiyotaka Nakajima +1 more

We present the experimental implementation of an RS flip-flop (RS-FF) composed of dc-biased coupled-SQUID (C-SQUID) gates. The C-SQUID gate is a combination of a single-junction SQUID and a double-junction SQUID. This gate utilizes nonhysteretic Josephson junctions and it is operated in nonlatching mode with dc-biasing. Several logical functions are able to be realized with a C-SQUID gate by adjusting the input bias and the input signal levels. The speed performance of the gate is evaluated by simulation for ring oscillators, and the minimum switching delay of 6.5 ps/stage is obtained under Josephson critical current density of 10 kA/cm/sup 2/. We have fabricated the RS-FF composed of two C-SQUID NOR gates. The circuit is integrated using a Nb/AlO/sub x//Nb junction technology and its operation is demonstrated experimentally.

IEEE Transactions on Applied Superconductivity•Jun 1, 1996•5 citations

Relaxation Oscillator Using Nb/AlOx/Al/Nb Josephson Junctions Measured with DC Superconducting Quantum Interference Devices

Nobuhiro Shimizu, T. Morooka, Mititada Morisue

In this paper we propose a new measurement method to investigate the basic properties of a Josephson relaxation oscillator (RO) using dc superconducting quantum interference devices (SQUIDs). The dc SQUIDs linearly and continuously convert the oscillating current into voltage enabling the waveforms to be clearly observed. The voltage and current waveforms have been measured simultaneously. The basic operation of the RO has been experimentally confirmed.

Japanese Journal of Applied Physics•Oct 1, 1995•2 citations

Average Voltage Measurements of Periodic Blocking Oscillation in Resistive Superconducting Quantum Interference Device Connected to Josephson Transmission Line

Yoshinao Mizugaki

Blocking oscillation (BO) is a unique operation mode of resistive superconducting quantum interference devices (RSQUIDs). The author presents experimental measurements of periodic BO by means of the average voltage method. Test circuits are fabricated using a Nb/AlO x /Nb integration process. The input/output voltage ratio in an RSQUID, of which the output is connected to a Josephson transmission line (JTL), becomes 2 under appropriate operation conditions. Since the voltage ratio is exactly proportional to the input/output switching frequency ratio, the results demonstrate the periodic BO, in which the numbers of switching during one period are 2 and 1 in the input and output junction, respectively.

Japanese Journal of Applied Physics•Feb 17, 2012•1 citation

Logic delays of 5-μm current-switched Josephson gates

S. S. Pei

Logic delays of a current-switched latching gate called the Josephson atto-Weber switch and its use in a dc powered flip-flop module have been investigated. Experimental circuits with cascade chains of 31 gates were fabricated using 5-μm square lead alloy tunnel junctions. Delays were measured on both the latching and the unlatching chains. The experimental circuits demonstrate operation faster than those reported for other Josephson gate designs using the same linewidth. For the latching OR gate with fanout of 3, the shortest measured gate delay is 15 ps.

Applied Physics Letters•Apr 15, 1982•11 citations

Tuning of the RSFQ Gate Speed by Different Stewart-McCumber Parameters of the Josephson Junctions

Boyko Dimov, M. Khabipov, D Balashov +4 more

At the typical operating temperature of 4.2 K, the theoretical upper limit of the clock frequency of the Low-Temperature Superconductive (LTS) Nb based Rapid Single Flux Quantum (RSFQ) digital circuits is several hundred GHz. Nevertheless, the few middle-scale RSFQ circuits reported on up to now operate at only some tens of GHz. An important performance-limiting factor is in this case the clock signal distribution, so nowadays asynchronous RSFQ designs are often considered. Our previous studies have shown that it is an important advantage of a given asynchronous RSFQ cell library to contain gates with tunable delays. We have already shown by simulations that the RSFQ gate delays are best adjusted by changing the Stewart-McCumber parameter /spl beta//sub c/ of the Josephson junctions-this method tunes the delay within a large interval of values while scarcely affecting the margins and the fabrication yield of the RSFQ gates. In order to prove this statement experimentally, we have designed, fabricated, and tested several ring-shaped oscillators with identical topologies but different Stewart-McCumber parameters of the Josephson junctions. Their operating speeds and margins are measured and compared.

IEEE Transactions on Applied Superconductivity•Jun 1, 2005•12 citations

An experimental Josephson digital correlator

Perng-Fei Yuh

A circuit capable of performing correlation of two sets of 16-sample, one-bit digital data has been designed and tested up to a clock frequency of 12 GHz. The correlator consists of two 16-b shift registers for delay and storage elements and an array of 16 exclusive-OR gates for the multiply-and-add function. It is fabricated using an Nb/AlO/sub x//Nb Josephson-junction process at a critical-current density of 1000 A/cm/sup 2/.>

IEEE Transactions on Applied Superconductivity•Jan 1, 1992•5 citations
The authors present the experimental results for the switching delay of a dc-biased nonlatching Josephson gate (a coupled-superconducting quantum interference device gate). The measurement is executed by the use of a ring oscillator (RO) method. A frequency-to-voltage converter is used to evaluate the oscillation frequency of the RO. The circuit is designed and fabricated using a 2.5-kA/cm/sup 2/ Nb/AlO/sub x//Nb Josephson junction technology. The results show the minimum switching delay of 18 ps.
We present the experimental implementation of an RS flip-flop (RS-FF) composed of dc-biased coupled-SQUID (C-SQUID) gates. The C-SQUID gate is a combination of a single-junction SQUID and a double-junction SQUID. This gate utilizes nonhysteretic Josephson junctions and it is operated in nonlatching mode with dc-biasing. Several logical functions are able to be realized with a C-SQUID gate by adjusting the input bias and the input signal levels. The speed performance of the gate is evaluated by simulation for ring oscillators, and the minimum switching delay of 6.5 ps/stage is obtained under Josephson critical current density of 10 kA/cm/sup 2/. We have fabricated the RS-FF composed of two C-SQUID NOR gates. The circuit is integrated using a Nb/AlO/sub x//Nb junction technology and its operation is demonstrated experimentally.
Blocking oscillation (BO) is a unique operation mode of resistive superconducting quantum interference devices (RSQUIDs). The author presents experimental measurements of periodic BO by means of the average voltage method. Test circuits are fabricated using a Nb/AlO x /Nb integration process. The input/output voltage ratio in an RSQUID, of which the output is connected to a Josephson transmission line (JTL), becomes 2 under appropriate operation conditions. Since the voltage ratio is exactly proportional to the input/output switching frequency ratio, the results demonstrate the periodic BO, in which the numbers of switching during one period are 2 and 1 in the input and output junction, respectively.
Logic delays of a current-switched latching gate called the Josephson atto-Weber switch and its use in a dc powered flip-flop module have been investigated. Experimental circuits with cascade chains of 31 gates were fabricated using 5-μm square lead alloy tunnel junctions. Delays were measured on both the latching and the unlatching chains. The experimental circuits demonstrate operation faster than those reported for other Josephson gate designs using the same linewidth. For the latching OR gate with fanout of 3, the shortest measured gate delay is 15 ps.
At the typical operating temperature of 4.2 K, the theoretical upper limit of the clock frequency of the Low-Temperature Superconductive (LTS) Nb based Rapid Single Flux Quantum (RSFQ) digital circuits is several hundred GHz. Nevertheless, the few middle-scale RSFQ circuits reported on up to now operate at only some tens of GHz. An important performance-limiting factor is in this case the clock signal distribution, so nowadays asynchronous RSFQ designs are often considered. Our previous studies have shown that it is an important advantage of a given asynchronous RSFQ cell library to contain gates with tunable delays. We have already shown by simulations that the RSFQ gate delays are best adjusted by changing the Stewart-McCumber parameter /spl beta//sub c/ of the Josephson junctions-this method tunes the delay within a large interval of values while scarcely affecting the margins and the fabrication yield of the RSFQ gates. In order to prove this statement experimentally, we have designed, fabricated, and tested several ring-shaped oscillators with identical topologies but different Stewart-McCumber parameters of the Josephson junctions. Their operating speeds and margins are measured and compared.