International Conference on Transparent Optical Networks
Towards all-diamond optical devices
Snjezana Tomljenovic‐Hanic, Igor Aharonovich, Stefania Castelletto, Barbara A. Fairchild, Kumaravelu Ganesan, Brant C. Gibson, Andrew D. Greentree, Julius O. Orwa, Sergey Rubanov, David Simpson, Alastair D. Stacey, Steven Prawer
Diamond is a unique material, with a host of attributes that seem to favour is as a platform for solid-state optical approaches to quantum information processing. Amongst the many outstanding properties of diamond, the most important for these applications are that it posses the largest transparency window in the visible regime, has the highest thermal conductivity, and most importantly, hosts a large number of high dipole moment colour centres. In this paper we give an overview of the fabrication and characterisation of diamond-based optical devices at the University of Melbourne.
Diamond is a unique material, with a host of attributes that seem to favour is as a platform for solid-state optical approaches to quantum information processing. Amongst the many outstanding properties of diamond, the most important for these applications are that it posses the largest transparency window in the visible regime, has the highest thermal conductivity, and most importantly, hosts a large number of high dipole moment colour centres. In this paper we give an overview of the fabrication and characterisation of diamond-based optical devices at the University of Melbourne.
Diamond is a unique material, with a host of attributes that seem to favour is as a platform for solid-state optical approaches to quantum information processing. Amongst the many outstanding properties of diamond, the most important for these applications are that it posses the largest transparency window in the visible regime, has the highest thermal conductivity, and most importantly, hosts a large number of high dipole moment colour centres. In this paper we give an overview of the fabrication and characterisation of diamond-based optical devices at the University of Melbourne
Diamond is emerging as an optical supermaterial, due to its wide transparency bandwidth, excellent thermooptic properties and most notably its stable, large dipole moment, room temperature, single photon emitting colour centres. In this paper we present recent progress in the characterization of non radiative and radiative decay in single impurities and the fabrication of hybrid diamond-tellurite optical structures.. First, we present direct imaging of the emission pattern of individual ion implanted chromium-based single photon emitters in diamond and measure their quantum efficiency. By comparing the decay rates from the single chromium emitters at different depths in the diamond crystal, we measured an average quantum efficiency of 28%. Second, a hybrid approach involving a soft glass tellurite host material has been introduced, allowing nitrogen-vacancy (NV-) diamond emitters to be built into an optical fibre. The potential of integrating Cr-related centres in hybrid optical structures is also discussed.
The past decade has seen an explosion of development in new devices, modalities, and architectures for advanced sensing, computation, and communication. This growth has been driven by the massive investments of large consumer-tech companies in data-hungry domains of customer interest. As these companies develop their products and seek a competitive edge, technologies which can provide advantage across application areas by making computation cheaper, or sensors more knowledgeable, or communication faster, are attracting more interest in and outside academia. Photonics, or the study of how to manipulate light, is a broad-based platform that inherently delivers on these promises. Although photonics has been a part of daily life since the invention of the laser, modern needs and aspirational designs which meet those needs far exceed the capabilities of the platforms which have traditionally constituted the photonics toolkit.\nThere are two specific areas where standard photonic materials are lacking - support for visible wavelengths and functionality for quantum optics. Currently, there are many implementations of systems which use visible light or quantum optics on the tabletop, but the drive to scale these technologies and deliver them to the consumer encounters a roadblock in their size and cost. Visible light sensors, for instance, could greatly benefit from conversion into an integrated photonics platform, where the optical components are printed onto a small substrate. However, the standard materials used for such systems (silicon and indium phosphide) absorb visible light, and other materials (like silicon nitride) do not have the attributes required for advanced functionality. More compellingly, there exist very few material platforms which can host the quantum defects required for next-generation technologies like quantum computation or secure communication.\nThe past decade has seen extensive research into an emerging material platform which can deliver on the ability to bring integrated visible photonics and quantum optics to the same chip - diamond. With a broad transparency region (from UV to the far infrared) and high refractive index, diamond makes an excellent material for run-of-the-mill photonic devices. More importantly, it harbors atom-like defects in its crystal lattice - the nitrogen-vacancy, silicon-vacancy, and germanium-vacancy centers, among many more - which provide a direct interface between the photons circulating within the diamond device and the quantum world. Taken together, these simple properties of diamond constitute a powerful approach towards implementation of advanced quantum technologies, such as repeaters for secure quantum communication or even, one day, computers.\nBefore that future arrives, diamond's capability must first be developed. Diamond has only been available in significant quantities for research use for about a decade, and as such, the processing technologies which are taken for granted in silicon or silicon nitride-based work must be redeveloped. Within the context of photonic devices, we discuss different fabrication strategies and their implications for device design. For visible light devices especially, we investigate methods to reduce sidewall roughness for etched structures.\nInterfacing with diamond photonic structures also brings its own unique set of challenges due to its high refractive index and very small material footprint. To this end, we develop a method termed "loaded tapered-fiber coupling" to optically access large, free-standing diamond devices. For size-limited diamond resonators and waveguides, we also develop auxiliary optical waveguides to act as spot-converters for visible wavelengths, an improvement on previous techniques for telecom-range wavelengths.\nFinally, by synthesizing these improvements in fabrication, we embark on a set of experiments in diamond microresonators. Nonlinear optics is an excellent testbed for such improvements, both for diamond's superlative properties in that regard and their high sensitivity to improvements in fabrication. First, we look at a process known as Raman lasing by constructing long path-length resonators.This technique involves the shifting of an input photon by 40 THz via the interaction with the diamond's crystal lattice.The first demonstration in a diamond integrated device was shown with a pump wavelength of 1600 nm, with an output that was tuned over 100 nm and a low threshold. Leveraging the developments in visible photonics for diamond, a second Raman laser was demonstrated, this time at near-visible (720 nm) wavelengths.This too had a Stokes output which was tunable to over 100 nm and a very low threshold. Raman-specific effects such as polarization conversion were also investigated.\nA cousin to the Raman effect, the Kerr nonlinearity plays a key role in so-called microresonator (or Kerr) frequency combs. We survey the possibilities and difficulties in implementation for a diamond platform, highlighting the competition between the Kerr and Raman nonlinearities. Although the outlook for a technologically relevant Kerr comb in diamond is ultimately pessimistic, avenues for improvement are highlighted. Namely, we investigate via simulation a related class of effects, known as supercontinuum generation.Taking advantage of subtleties of the Raman process in diamond, we can find a preferred geometry which enables generation of a broadband light spectrum natively in diamond.\nFinally, we look at alternative applications of diamond, particularly in high-power systems. Due to its excellent thermal conductivity and power-handling capacity, optics fashioned purely out of diamond can show significant advantages compared to other materials. We end with a discussion of the design principles and results stemming from this work.
Diamond, prized as both a gemstone and a cutting and polishing material, has recently been recognised for another remarkable property, a host of optically active colour centre defects. With the rise of interest in these colour centres, due to the unique optical properties, comes a need for interfacing with other optical platforms. Recent advances have attempted to fabricate optical structures from the diamond itself, or to combine these colour centres with the well-known fabrication techniques of other materials by placing nanodiamond crystals on the surface of other structures, such as microdisks, microspheres, and optical fibres. This thesis presents a new approach to this integration by demonstrating the fabrication of a hybrid nanodiamond-glass material. This technique embeds the nanodiamond within the optical structure, offering interaction with the bound optical fields, protection, and ease of fabrication. A range of optical structures has previously been fabricated from the chosen glass, tellurite, and fabrication of an optical fibre is demonstrated here. Also presented is the derivation of a model describing coupling of an emitter to an optical fibre. While used here to investigate coupling of diamond colour centres to the optical fibre modes, it is more generally applicable to any emitter. These results show the first steps of a new approach to diamond integrated photonics.
Abstract Colour centres in diamonds have attracted considerable interest for quantum sensing applications. Boasting great photostability, long coherence times at room temperature and unique electronic properties that allow for optical initialization and readout of their quantum state, colour centres have found use in a variety of techniques for thermometry, magnetometry and nanoscale spectroscopy. Coupled with the possibility of preparing nanoparticles, their excellent biocompatibility and versatile surface chemistry that allows for functionalization and fine-tuning of surface properties, diamonds hosting colour centres have proven to be a versatile and flexible platform for measurements of local properties in a wide range of biological and biochemical systems. In this perspective, we summarize the key properties of the colour centres in diamonds and how different surface chemistry impacts their electronic properties. Finally, we discuss the crucial role of surface chemistry in various sensing applications and highlight the potential of diamond materials to address current challenges in quantum science and technology.
We describe the current status in fabrication and characterization of diamond-based optical structures. First, we describe the unique properties of diamond and broadly consider three applications – sensing, single-photon generation for quantum key distribution, and scalable quantum information processing – that benefit from, or are enabled by diamond-based optical devices. Then the optical properties of three main forms of diamond are summarized and designs for diamond-based optical structures are reviewed. Finally, we present three major platforms used for the creation of practical diamond photonic structures: single crystal, polycrystalline diamond, and hybrid approaches.