© 2026 Aqora Quantum S.A.S.

Terms Privacy Legal Notice

IEEE Transactions on Applied Superconductivity

Metrological Study of YBCO Josephson Junction Arrays Integrated in a Fabry-Perot Resonator

A. Sosso, Domenico Andreone, V. Lacquaniti, Alexander M. Klushin, M. He, N. Klein

Published Jun 1, 2007• 8 citations

Abstract

The application of high temperature superconductor Josephson junctions to voltage metrology is promising for many reasons, beyond the evident advantage of simplified cryogenics and reduced costs of the apparatus. Owing to their intrinsic non-hysteretic behavior, arrays of shunted bicrystal YBCO junctions are particularly interesting for the realization of an AC voltage standard with quantum accuracy. Moreover, shunted bicrystal YBCO junctions arrays are advantageous because of the reduced area of the junctions, the wide range of characteristic voltages, and large critical currents. However, some specific problems arise, like possible effects related to the higher operating temperature. Furthermore, fabrication technology sets tight constraints on the design of structures for the distribution of microwave currents along the array junctions. We investigated the step properties under millimeter wave irradiation at frequencies about 75 GHz of HTS junction and arrays prepared on bicrystal substrates having grain boundaries. High sensitivity techniques were adopted to evaluate the step flatness at nV level and assess the accuracy of the step voltage. A new method that makes use of an open resonator, was implemented to irradiate the array, providing synchronization of a large number of junctions.

DOI: 10.1109/tasc.2007.898581

Related papers

Optimization of the coupling of mm wave power to arrays of high-TcJosephson junctions

Alexander M. Klushin, M He, M. Levitchev +2 more

We explored high-temperature superconductor Josephson junction arrays embedded in a hemispherical Fabry-Perot resonator. We compared the characteristics of three designs of arrays to achieve steps at higher voltage with a better coupling to the millimeter wave irradiation power. With an optimal design, we achieved a maximum Josephson voltage of about 0.1V for an array of 620 bicrystal junctions at a temperature of 79.2K and a frequency of 77.465 GHz. Also steps from 0.01 V up to 0.1 V were observed. Our results showed that such circuits are challenging for applications in quantum voltage metrology. It is important to note that our quasioptical coupling method can be extended up to terahertz frequencies.

Journal of Physics Conference Series•Feb 1, 2008•9 citations

Bicrystal Josephson junctions and arrays in a Fabry-Perot resonator

Alexander M. Klushin, D. M. Druzhnov, N. Klein

Full frequency locking of an array of 121 Josephson junctions was demonstrated upon millimeter wave irradiation employing a Fabry-Perot resonator at 73 GHz. This result indicates that such arrays exhibit promising properties to be utilized in quantum voltage metrology. On the other hand, the combination of such arrays with THz-Fabry Perot resonators is very challenging for developing Josephson array radiation sources for the THz frequency band.

Journal of Physics Conference Series•Jun 1, 2006•6 citations

A method for self-radiation of Josephson junction arrays

Zh Wang, Xinjie Zhao, H W Yue +6 more

We proposed a novel approach to self-radiation of Josephson junction arrays. Bicrystal Josephson junction arrays fabricated on a bicrystal substrate were integrated with a half-wavelength dipole array and embedded in a Fabry–Perot resonator. Considered as a dielectric resonator, the substrate could be stimulated to resonate in an appropriate mode at the same frequency as the Fabry–Perot resonator, which realized a coupling between Josephson junctions as well as a coupling between the junctions and microwave structures by means of a resonant interaction between junctions and resonators. Both simulations and experiments were performed. A YBCO bicrystal Josephson junction array with 166 junctions was measured at liquid nitrogen temperature. The maximal self-radiation power of 10 pW was detected at 75.2 GHz, which was in agreement with the simulation results.

Superconductor Science and Technology•May 4, 2010•12 citations

Millimeter wave irradiation characteristics of high temperature superconductor bicrystal Josephson junction embedded in a Fabry-Perot resonator

Yue Hong-Wei, Yan Shao-lin, Zhou Tie-Ge +10 more

The millimeter wave irradiation characteristics of a Tl-2212 high-temperature superconducting thin film bicrystal Josephson junction embedded in a hemispherical Fabry-Perot resonator was studied. The coupling characteristics of the bicrystal Josephson junction with the Fabry-Perot resonator have been investigated experimently, showing that it was greatly affected by the factors such as the location of the sample in the open resonator, the angle between them, the pattern of the junction and the distance between the two reflecting mirrors of the resonator. The optimized coupling between Josephson junction and applied microwave was achieved by refined adjustment of the factors. In this case, 9 orders distinct Shapiro steps were observed. Taking advantage of the Fabry-Perot resonator technique, the coupling problem between high-temperature superconducting thin film Josephson junction and applied millimeter wave was well solved, which is of significance for the research on radiation and detection of millimeter wave and terahertz wave of high-temperature superconducting Josephson junction.

Acta Physica Sinica•Jan 1, 2010•1 citation

Millimeter Wave Mixing Properties of EuBa 2Cu 3O 7-δ Bicrystal Grain Boundary Junction Arrays

Koji Tsuru, Kazunori Miyahara, Minoru Suzuki

We report the millimeter wave mixing properties of high-T c superconductor Josephson junction arrays using a waveguide-to-microstrip converter in the 100 GHz frequency range. The junction arrays consist of 3 weak links fabricated from EuBa2Cu3O7-δ thin films grown on an MgO bicrystal substrate. In these junction arrays, Shapiro steps are observed in the presence of 100 GHz irradiation at intervals of 3 times the fundamental step voltage. Millimeter wave mixing with an input local oscillator frequency of 99.142 GHz and an input signal frequency of 99.880 GHz is detected as the IF output at 738 MHz. The IF output power peaks at voltages corresponding to those of the dynamic resistance dV/ dI. A mixing conversion efficiency of -24.1 dB is obtained for a 3-junction array.

Japanese Journal of Applied Physics•Dec 1, 1996•1 citation

Arrays of high-Tc Josephson junctions in open millimeter wave resonators

Alexander M. Klushin, M. He, S.L. Yan +1 more

The authors have explored the coupling mechanism of a millimeter wave radiation to bicrystal Josephson junction arrays embedded in a hemispherical Fabry-Pérot resonator. The authors have found that their high-temperature superconductor array can be modeled as a thin film grid polarizer. In agreement with this model, a strong dependence of the coupling of the Josephson junctions on the polarization of the electric filed in the resonator was observed. The authors achieved a maximum Josephson voltage of 28mV for an array of 182 bicrystal junctions at a temperature of 75K and a frequency of 74.4GHz.

Applied Physics Letters•Dec 4, 2006•24 citations

The application of high temperature superconductor Josephson junctions to voltage metrology is promising for many reasons, beyond the evident advantage of simplified cryogenics and reduced costs of the apparatus. Owing to their intrinsic non-hysteretic behavior, arrays of shunted bicrystal YBCO junctions are particularly interesting for the realization of an AC voltage standard with quantum accuracy. Moreover, shunted bicrystal YBCO junctions arrays are advantageous because of the reduced area of the junctions, the wide range of characteristic voltages, and large critical currents. However, some specific problems arise, like possible effects related to the higher operating temperature. Furthermore, fabrication technology sets tight constraints on the design of structures for the distribution of microwave currents along the array junctions. We investigated the step properties under millimeter wave irradiation at frequencies about 75 GHz of HTS junction and arrays prepared on bicrystal substrates having grain boundaries. High sensitivity techniques were adopted to evaluate the step flatness at nV level and assess the accuracy of the step voltage. A new method that makes use of an open resonator, was implemented to irradiate the array, providing synchronization of a large number of junctions.

We explored high-temperature superconductor Josephson junction arrays embedded in a hemispherical Fabry-Perot resonator. We compared the characteristics of three designs of arrays to achieve steps at higher voltage with a better coupling to the millimeter wave irradiation power. With an optimal design, we achieved a maximum Josephson voltage of about 0.1V for an array of 620 bicrystal junctions at a temperature of 79.2K and a frequency of 77.465 GHz. Also steps from 0.01 V up to 0.1 V were observed. Our results showed that such circuits are challenging for applications in quantum voltage metrology. It is important to note that our quasioptical coupling method can be extended up to terahertz frequencies.

We proposed a novel approach to self-radiation of Josephson junction arrays. Bicrystal Josephson junction arrays fabricated on a bicrystal substrate were integrated with a half-wavelength dipole array and embedded in a Fabry–Perot resonator. Considered as a dielectric resonator, the substrate could be stimulated to resonate in an appropriate mode at the same frequency as the Fabry–Perot resonator, which realized a coupling between Josephson junctions as well as a coupling between the junctions and microwave structures by means of a resonant interaction between junctions and resonators. Both simulations and experiments were performed. A YBCO bicrystal Josephson junction array with 166 junctions was measured at liquid nitrogen temperature. The maximal self-radiation power of 10 pW was detected at 75.2 GHz, which was in agreement with the simulation results.

The millimeter wave irradiation characteristics of a Tl-2212 high-temperature superconducting thin film bicrystal Josephson junction embedded in a hemispherical Fabry-Perot resonator was studied. The coupling characteristics of the bicrystal Josephson junction with the Fabry-Perot resonator have been investigated experimently, showing that it was greatly affected by the factors such as the location of the sample in the open resonator, the angle between them, the pattern of the junction and the distance between the two reflecting mirrors of the resonator. The optimized coupling between Josephson junction and applied microwave was achieved by refined adjustment of the factors. In this case, 9 orders distinct Shapiro steps were observed. Taking advantage of the Fabry-Perot resonator technique, the coupling problem between high-temperature superconducting thin film Josephson junction and applied millimeter wave was well solved, which is of significance for the research on radiation and detection of millimeter wave and terahertz wave of high-temperature superconducting Josephson junction.

We report the millimeter wave mixing properties of high-T c superconductor Josephson junction arrays using a waveguide-to-microstrip converter in the 100 GHz frequency range. The junction arrays consist of 3 weak links fabricated from EuBa2Cu3O7-δ thin films grown on an MgO bicrystal substrate. In these junction arrays, Shapiro steps are observed in the presence of 100 GHz irradiation at intervals of 3 times the fundamental step voltage. Millimeter wave mixing with an input local oscillator frequency of 99.142 GHz and an input signal frequency of 99.880 GHz is detected as the IF output at 738 MHz. The IF output power peaks at voltages corresponding to those of the dynamic resistance dV/ dI. A mixing conversion efficiency of -24.1 dB is obtained for a 3-junction array.

The authors have explored the coupling mechanism of a millimeter wave radiation to bicrystal Josephson junction arrays embedded in a hemispherical Fabry-Pérot resonator. The authors have found that their high-temperature superconductor array can be modeled as a thin film grid polarizer. In agreement with this model, a strong dependence of the coupling of the Josephson junctions on the polarization of the electric filed in the resonator was observed. The authors achieved a maximum Josephson voltage of 28mV for an array of 182 bicrystal junctions at a temperature of 75K and a frequency of 74.4GHz.