Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Transactions on Applied Superconductivity

Characterization of the Mixing Performance of All-NbN Superconducting Tunnel Junctions at 0.5 THz

Jing Li, Mahoto Takeda, Zhen Wang, Sheng-Cai Shi

Published Jun 1, 2009• 13 citations
Publisher

Abstract

With a gap frequency of 1.4 THz, all-NbN Superconductor-Insulator-Superconductor (SIS) junctions are potentially applicable to sensitive heterodyne mixers for THz astronomy and atmospheric research. In this paper, we report the design, fabrication, and performance characterization of a 0.5-THz waveguide SIS mixer incorporating twin NbN/AlN/NbN junctions and an NbN/MgO/NbN tuning circuit with no impedance transformers. The noise performance of two NbN SIS junctions with different tuning inductances is measured, compared with the simulated results without and with the multiple Andreev reflection (MAR) effect taken into account, and also compared with the video detection response. In addition, the IF-output-power stability and aging effect of fabricated NbN SIS junctions are investigated.

DOI
10.1109/tasc.2009.2018504

Related papers

Comparison of the performance of a 0.5-THz Nb and NbN superconducting SIS mixer

Jing Li, Masanori Takeda, Zhen Wang +1 more

In THz regime, NbN Superconductor - Insulator - Superconductor (SIS) mixers are potentially applicable to astronomy and atmospheric research. We have developed a 0.5-THz waveguide SIS mixer incorporating twin NbN/AlN/NbN junctions and NbN/MgO/NbN tuning circuit. In this paper, we compare it with a 0.5-THz Nb SIS mixer, which has been successfully used on POST telescope. The design and fabrication parameters of the two mixers are introduced, and the noise temperatures are measured. In addition, the direct detection performance is analyzed, such as the shot noise, the current responsivity and the noise equivalent power. The detailed results are presented.

Asia-Pacific Microwave Conference (APMC)•Dec 1, 2009•1 citation

0.5-THz waveguide SIS mixers with NbN/AlN/NbN technology

Jing Li, Masanori Takeda, Zhen Wang +1 more

Heterodyne mixers based on superconducting SIS (superconductor-insulator-superconductor) tunnel junctions have been demonstrated to be the most sensitive coherent detectors at millimeter and submillimeter wavelengths. In fact, conventional superconducting SIS mixers with Nb/AlOx/Nb junction and Nb/SiO2/Nb tuning circuit have shown good performances with the noise temperature reaching as low as three times the quantum limit below 0.7THz, which is the gap frequency of Nb-based SIS junctions. However, due to the large loss in Nb thin-film superconducting microstrip lines, the noise performance of Nb SIS mixers deteriorates significantly above 0.7THz. With a gap frequency double that of Nb-based SIS junctions, NbN-based SIS junctions are of particular interest for the development of heterodyne mixers in the terahertz region. Considering the bandwidth and output power of local-oscillator (LO) signal sources are quite limited around 1THz, we firstly develop a waveguide NbN-based SIS mixer at 0.5THz. Three types of SIS junctions, i.e., long junction, parallel-connected tunnel junction (PCTJ) and distributed junction array (DJ) are investigated. They are all comprised of NbN-AlN-NbN tri-layer fabricated on an MgO substrate and have the same current density (Jc) of 10kA/cm2. In this paper, we describe their design, fabrication and preliminary experimental results.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Nov 29, 2007•3 citations

0.5-THz waveguide SIS mixers with NbN/AlN/NbN technology - art. no. 684013

Jing Li, Takeda Masanon, Zhen Wang

Heterodyne mixers based on superconducting SIS (superconductor-insulator-superconductor) tunnel junctions have been demonstrated to be the most sensitive coherent detectors at millimeter and submillimeter wavelengths. In fact, conventional superconducting SIS mixers with Nb/AIO(x)/Nb junction and Nb/SiO2/Nb tuning circuit have shown good performances with the noise temperature reaching as low as three times the quantum limit below 0.7THz, which is the gap frequency of Nb-based SIS junctions. However, due to the large loss in Nb thin-film superconducting microstrip lines, the noise performance of Nb SIS mixers deteriorates significantly above 0.7THz. With a gap frequency double that of Nb-based SIS junctions, NbN-based SIS junctions are of particular interest for the development of heterodyne mixers in the terahertz region.

•Jan 1, 2008•0 citations

Development of a 0.5-THz Waveguide NbN-Based SIS Mixer

Jing Li, Masanori Takeda, Zhen Wang +1 more

This paper mainly reports the development of a 0.5-THz waveguide SIS (superconductor – insulator – superconductor) mixer, which adopts twin NbN-based SIS junctions (NbN/AlN/NbN) connected in parallel. The 0.5-THz waveguide NbN SIS mixer is designed incorporating with a 51-μm thick MgO substrate and a waveguide mixer mount with no back-short cavity. Detailed simulation results, junction fabrication process and junction I-V characteristics are described. Preliminary FTS (Fourier Transform Spectrometer) measurement results will also be discussed.

International Conference on Microwave and Millimeter Wave Technology (ICMMT)•Apr 1, 2007•4 citations

Design and analysis of 230 GHz all-NbN superconductor-insulator-superconductor mixer

Minran Chen, Peng Chen, Lin‐Jie Zhang +7 more

In this work, a 230 GHz all-NbN superconductor-insulator-superconductor (SIS) mixer was designed and analyzed. The NbN/AlN/NbN tunnel junctions (with an energy gap of 5.7 meV) and NbN/MgO/NbN tuning circuits were utilized. Full-height waveguides and bow-tie waveguide probes were adopted. The signal coupling circuit was designed and optimized to be transmissible to the given band. The quantum mixing characteristics of the all-NbN mixers were optimized with different-size SIS junctions. The mixer with a junction diameter of 1 μm achieves a conversion gain close to 0 dB and a noise temperature close to 40 K. The proposed design and analysis will provide technical support for the recovery and upgrade of the heterodyne receiver for the Leighton Chajnantor Telescope (LCT).

Infrared, Millimeter-Wave, and Terahertz Technologies•Oct 11, 2024•1 citation

Low-noise waveguide SIS mixer with NbN/AlN/NbN tunnel junctions tuned by an NbN/MgO/NbTiN microstrip circuit

Masanori Takeda, Wenlei Shan, Takafumi Kojima +4 more

The low-noise performance of a waveguide SIS mixer with NbN/AlN/NbN tunnel junctions and an NbN/MgO/NbTiN tuning circuit on an MgO substrate was demonstrated at frequencies above the gap frequency of Nb. To design the mixer, the complex refractive index of the MgO substrate was measured by using a THz time-domain spectrometer. The superconductive properties of NbTiN films on MgO were examined in detail. An uncorrected receiver noise temperature of 262 K (DSB) at 820 GHz was achieved in an IF bandwidth of 4-12 GHz at a bath temperature of 4.2 K. By comparing the measured and calculated conversion gains, the loss in the NbN/MgO/NbTiN tuning circuit was estimated to be 0.98 dB at 810 GHz.

Superconductor Science and Technology•Jun 10, 2009•10 citations
With a gap frequency of 1.4 THz, all-NbN Superconductor-Insulator-Superconductor (SIS) junctions are potentially applicable to sensitive heterodyne mixers for THz astronomy and atmospheric research. In this paper, we report the design, fabrication, and performance characterization of a 0.5-THz waveguide SIS mixer incorporating twin NbN/AlN/NbN junctions and an NbN/MgO/NbN tuning circuit with no impedance transformers. The noise performance of two NbN SIS junctions with different tuning inductances is measured, compared with the simulated results without and with the multiple Andreev reflection (MAR) effect taken into account, and also compared with the video detection response. In addition, the IF-output-power stability and aging effect of fabricated NbN SIS junctions are investigated.
In THz regime, NbN Superconductor - Insulator - Superconductor (SIS) mixers are potentially applicable to astronomy and atmospheric research. We have developed a 0.5-THz waveguide SIS mixer incorporating twin NbN/AlN/NbN junctions and NbN/MgO/NbN tuning circuit. In this paper, we compare it with a 0.5-THz Nb SIS mixer, which has been successfully used on POST telescope. The design and fabrication parameters of the two mixers are introduced, and the noise temperatures are measured. In addition, the direct detection performance is analyzed, such as the shot noise, the current responsivity and the noise equivalent power. The detailed results are presented.
Heterodyne mixers based on superconducting SIS (superconductor-insulator-superconductor) tunnel junctions have been demonstrated to be the most sensitive coherent detectors at millimeter and submillimeter wavelengths. In fact, conventional superconducting SIS mixers with Nb/AlOx/Nb junction and Nb/SiO2/Nb tuning circuit have shown good performances with the noise temperature reaching as low as three times the quantum limit below 0.7THz, which is the gap frequency of Nb-based SIS junctions. However, due to the large loss in Nb thin-film superconducting microstrip lines, the noise performance of Nb SIS mixers deteriorates significantly above 0.7THz. With a gap frequency double that of Nb-based SIS junctions, NbN-based SIS junctions are of particular interest for the development of heterodyne mixers in the terahertz region. Considering the bandwidth and output power of local-oscillator (LO) signal sources are quite limited around 1THz, we firstly develop a waveguide NbN-based SIS mixer at 0.5THz. Three types of SIS junctions, i.e., long junction, parallel-connected tunnel junction (PCTJ) and distributed junction array (DJ) are investigated. They are all comprised of NbN-AlN-NbN tri-layer fabricated on an MgO substrate and have the same current density (Jc) of 10kA/cm2. In this paper, we describe their design, fabrication and preliminary experimental results.
Heterodyne mixers based on superconducting SIS (superconductor-insulator-superconductor) tunnel junctions have been demonstrated to be the most sensitive coherent detectors at millimeter and submillimeter wavelengths. In fact, conventional superconducting SIS mixers with Nb/AIO(x)/Nb junction and Nb/SiO2/Nb tuning circuit have shown good performances with the noise temperature reaching as low as three times the quantum limit below 0.7THz, which is the gap frequency of Nb-based SIS junctions. However, due to the large loss in Nb thin-film superconducting microstrip lines, the noise performance of Nb SIS mixers deteriorates significantly above 0.7THz. With a gap frequency double that of Nb-based SIS junctions, NbN-based SIS junctions are of particular interest for the development of heterodyne mixers in the terahertz region.
This paper mainly reports the development of a 0.5-THz waveguide SIS (superconductor – insulator – superconductor) mixer, which adopts twin NbN-based SIS junctions (NbN/AlN/NbN) connected in parallel. The 0.5-THz waveguide NbN SIS mixer is designed incorporating with a 51-μm thick MgO substrate and a waveguide mixer mount with no back-short cavity. Detailed simulation results, junction fabrication process and junction I-V characteristics are described. Preliminary FTS (Fourier Transform Spectrometer) measurement results will also be discussed.
In this work, a 230 GHz all-NbN superconductor-insulator-superconductor (SIS) mixer was designed and analyzed. The NbN/AlN/NbN tunnel junctions (with an energy gap of 5.7 meV) and NbN/MgO/NbN tuning circuits were utilized. Full-height waveguides and bow-tie waveguide probes were adopted. The signal coupling circuit was designed and optimized to be transmissible to the given band. The quantum mixing characteristics of the all-NbN mixers were optimized with different-size SIS junctions. The mixer with a junction diameter of 1 μm achieves a conversion gain close to 0 dB and a noise temperature close to 40 K. The proposed design and analysis will provide technical support for the recovery and upgrade of the heterodyne receiver for the Leighton Chajnantor Telescope (LCT).
The low-noise performance of a waveguide SIS mixer with NbN/AlN/NbN tunnel junctions and an NbN/MgO/NbTiN tuning circuit on an MgO substrate was demonstrated at frequencies above the gap frequency of Nb. To design the mixer, the complex refractive index of the MgO substrate was measured by using a THz time-domain spectrometer. The superconductive properties of NbTiN films on MgO were examined in detail. An uncorrected receiver noise temperature of 262 K (DSB) at 820 GHz was achieved in an IF bandwidth of 4-12 GHz at a bath temperature of 4.2 K. By comparing the measured and calculated conversion gains, the loss in the NbN/MgO/NbTiN tuning circuit was estimated to be 0.98 dB at 810 GHz.