A low-skew frequency divider and clock controller have been designed for high-frequency timing of superconductor rapid single-flux-quantum (RSFQ) digital systems. The circuits have only about 10-ps skew between input and output signals and are applicable for multirate digital systems (e,g., oversampling analog-to-digital converter and bit-serial digital systems). Several circuits have been fabricated in conventional Nb-trilayer technology with a critical current density of 1 kA/cm/sup 2/. The most complex clock controller generates trains of 2/sup 24/ single-flux-quantum pulses with a period of less than 70 ps. The long-term relative stability of these intervals has been measured to be better than 6/spl times/10/sup -5/. The basic component of the controller, a frequency divider, operates at input frequencies above 85 GHz.>
A low-skew frequency divider and clock controller have been designed for high-frequency timing of superconductor rapid single-flux-quantum (RSFQ) digital systems. The circuits have only about 10-ps skew between input and output signals and are applicable for multirate digital systems (e,g., oversampling analog-to-digital converter and bit-serial digital systems). Several circuits have been fabricated in conventional Nb-trilayer technology with a critical current density of 1 kA/cm/sup 2/. The most complex clock controller generates trains of 2/sup 24/ single-flux-quantum pulses with a period of less than 70 ps. The long-term relative stability of these intervals has been measured to be better than 6/spl times/10/sup -5/. The basic component of the controller, a frequency divider, operates at input frequencies above 85 GHz.>
We describe the design of an oversampling single-flux-counting analog-to-digital converter with the estimated bandwidth of a few tens of MHz, based on Rapid Single-Flux-Quantum (RSFQ) devices. It consists of an input analog circuit, high-speed quantizer with an original analog/digital negative feedback loop, decimation (comb) filter, and supporting subsystems including clock distribution circuits, quantization signal conditioner, and output drivers. We have applied a new approach, the 'symmetrizing' negative feedback, to free the quantizer from the intrinsic hysteresis without dynamic range sacrifice. The 16-bit version of the system comprises about 1,500 Josephson junctions and consumes 1.2 mW of DC power, when implemented using Nb-trilayer technology with 1 kA/cm/sup 2/, 3.5 /spl mu/m Josephson junctions. All subsystems of the converter have been successfully tested and testing of the system as a whole is in progress.>
Superconductive Rapid Single Flux Quantum (RSFQ) logic and memory, in which ones and zeros are represented by the presence or absence within a timing window of quantized picosecond voltage pulse (/spl int/v(t)dt=h/2e=2.07 mV/spl middot/ps), corresponding to one SFQ, can be integrated into a digital computing system with an operating rate of several tens of GHz, based on the present Nb Josephson junction integrated circuit technology. It is the most promising technology beyond semiconductor transistors for low-power high-end computation. However, as the operating speed of circuits and systems increase, timing uncertainty from fabrication process variations makes global synchronization very hard. In this paper, we present a globally asynchronous, locally synchronous timing methodology for RSFQ digital design, which can solve the global synchronization problem. We also demonstrate the recent experimental results of some asynchronous circuits and systems implemented in RSFQ technology. Several key components such as a self-timed shift register, a self-timed demultiplexor, a Muller-C element, a completion detector, and a clock generator have been designed and tested. High speed operation has been confirmed up to 20 Gb/s for a prototype data buffer system, which consists two self-timed shift registers and an on-chip 5-38 GHz clock generator.
The paper presents the determination of the high-frequency performance of Rapid Single Flux Quantum (RSFQ) circuits fabricated in superconductor-insulator-normal metal-insulator-superconductor (SINIS) technology. Circuits of different designs have been realized and were experimentally investigated, including specially designed T flip-flop (TFF) structures and circuits consisting of a switch terminated in Josephson transmission lines. For TFF circuits, the operational functionality was investigated in the frequency range from dc up to nearly 200 GHz. Two frequency domains were found. In the first domain, ranging up to frequencies of 80 GHz (f/sub C//spl cong/Y/sub C///spl Phi//sub 0/), correct digital operation of the device was ascertained. Beyond this range a second domain was found, ranging to nearly 200 GHz, for which quasi-analog frequency dividing is assumed. The bias current margins are /spl plusmn/30% at 40 GHz and /spl plusmn/15% between 130 GHz and 200 GHz. For circuits consisting of a switch, the operational functionality was proved in the frequency range from dc up to 50 GHz, with bias current margins of more than /spl plusmn/20%. The critical current density of the circuits is j/sub C//spl cong/750 A/cm/sup 2/. The smallest junction area is about A=12 /spl mu/m/sup 2/, and the characteristic voltage is V/sub C/=170 /spl mu/V.
Several novel circuits of the rapid single-flux-quantum (RSFQ) family of Josephson-junction digital devices have been designed, fabricated using a 2.5- mu m 1000-A/cm/sup 2/ Nb trilayer technology, and tested at low frequencies. Numerical simulation and measurements have shown that these circuits have considerably wider parameter margins, due to application of several novel design methods. The authors have also carried out an experiment to measure the rate of errors in a simple RSFQ circuit including an inverter, confluence buffer, and Josephson transmission line. Near the middle of the parameter window at 4.2 K, the error probability was definitely lower than 3*10/sup -15/ per logic operation, despite experimentation with rudimentary shielding and filtering.>
A superconductor frequency divider based on rapid single flux quantum (RSFQ) logic has been demonstrated to operate from dc to 750 GHz with an error rate less than the measurement limit (25 MHz). This high operating frequency is made possible by the use of small (0.25 μm2), high critical current density Josephson junctions along with an optimized design having parameter margins of ±30%. Simulations based on the Werthamer model are in reasonable agreement with the data and give a SFQ pulse width of 1 ps and a maximum power dissipation of 1.5 μW.
We have designed, fabricated, and successfully tested a Time-to-Digital converter (TDC). The TDC circuit consists of superconductive counters based on toggle flip-flops with destructive readout, shift registers, parallel-to-serial converters, and pulse detectors. The value of the counter is latched while the counter is operating at full speed. The TDC resolution is directly determined by the maximum counter speed, or 50 ps for an available 20 GHz clock rate. The circuits are implemented in HYPRES' standard Nb process with a critical current density of 1.0 kA/cm/sup 2/ using HYPRES' library of standard RSFQ cells.