Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Transactions on Applied Superconductivity

Feasibility study of RSFQ-based self-routing nonblocking digital switches

Dmitry Y. Zinoviev, Konstantin K. Likharev

Published Jun 1, 1997• 24 citations
Publisher

Abstract

This paper describes the results of a preliminary analysis of ultra-fast low-power superconductor digital switches based on Rapid Single-Flux-Quantum (RSFQ) technology. In particular, RSFQ-based crossbar, Batcher-banyan, and shared bus switching cores have been considered, and the possible parameters of these circuits have been estimated. The results show that the proposed RSFQ digital switches with overall throughput of 7.5 Tbps operating at an internal clock frequency of /spl sim/60 GHz and dissipating very little power could effectively compete with their semiconductor and photonic counterparts.

DOI
10.1109/77.622001

Related papers

High-speed rapid single-flux-quantum (RSFQ) Batcher-banyan switching core

Dmitry Y. Zinoviev

We have carried out a paper feasibility study of the implementation of most common packet switching cores (crossbar, Batcher-banyan, time-division shared bus, and token ring) using the superconductor rapid single flux quantum (RSFQ) digital technology. According to our estimates, the best performance-to-complexity ratio may be obtained for the Batcher-banyan network. For example, a 128 by 128 switching core with self-routing (but without address translation, contention resolution, and broadcast features), consisting of about 180,000 Josephson junctions with the internal clock frequency of 60 GHz could handle a workload of 7.5 Tbps. This core could fit on a single 1 cm by 1 cm chip and dissipate as low as 45 mW. The estimated parameters are achievable using a simple 1.5-micrometer niobium- trilayer technology.

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE•Nov 4, 1996•1 citation

Superconductive single-flux quantum technology

Oleg A. Mukhanov

Key digital circuits for signal processing with tens of gigahertz speed and a few microwatts power dissipation have been recently demonstrated using a simple, 2 /spl mu/m linewidth process. These are the fastest digital circuits reported to date. These circuits use novel rapid single flux quantum (RSFQ) technology that takes advantage of the fundamental properties of superconductivity. In this technology, data and clock are picosecond-long quantized voltage pulses corresponding to the transfer of single magnetic flux quanta, /spl Phisub 0/=h/2e=2 mVps. These SFQ pulses are regenerated at each gate and are processed by circuits comprised of overdamped Josephson junctions interconnected via microstrip inductances. The inherent internal memory of all RSFQ gates (primarily flip-flops), combined with high switching speed, makes serial, bit-pipelined circuit design advantageous. This paper presents experiments in RSFQ digital circuits, including an N/spl times/8b serial multiplier, and on-chip test systems based on RSFQ shift registers and on SFQ samplers. They enable test and study of RSFQ circuits at full GHz speed while communicating with semiconductor electronics at low speed.>

Digest of technical papers/Digest of technical papers - IEEE International Solid-State Circuits Conference•Dec 17, 2002•8 citations

Progress of RSFQ High Performance Packet Switch

Shinichi Yorozu, Yoshihito Hashimoto, 義男 亀田 +1 more

Internet traffic loads are increasing. Sustaining packet switching throughput of a core node will be difficult. A major reason for this is power consumption and packaging volume. As long as we use only current semiconductor technology, the switching capacity will be limited. Rapid single flux quantum (RSFQ) superconducting technology can overcome such difficulties because of high-speed operation and low-power consumption characteristics. A superconducting wiring also enables high-speed inter-chip communication. We report on progress on packet switch circuit implementation and cryo-cooled packaging for a RSFQ packet switch system. In addition, we discuss a possible packet switch architecture over 100 Tbps that uses RSFQ technology.

Advances in science and technology•Oct 1, 2006•0 citations

Optimised asynchronous self-timing for superconducting RSFQ logic circuits

H.R. Gerber, Coenrad Johann Fourie, Willem Jakobus Perold

Rapid single flux quantum (RSFQ) logic is a digital circuit technology that in recent years has presented itself as an alternative to semiconductors in the application of ultra high speed, very low power applications. The optimal timing of digital circuits operating at hundreds of GHz is still a complex problem for both RSFQ and semiconductor technologies. The fact that most RSFQ gates require a clock signal to function makes this even more complex. Various RSFQ timing schemes have been adapted from semiconductor design methodologies, and some have been designed specifically for RSFQ. Currently, synchronous clocking schemes outperform other schemes, but with the scale of RSFQ circuits ever increasing, the proper use of timing schemes are becoming more crucial. This paper describes a new asynchronous self-timing scheme where the details of clock distribution and clocking are built into the logic gates. Tests were done on the newly developed asynchronous logic gates and an asynchronous full adder was implemented and tested

IEEE AFRICON•Apr 6, 2005•2 citations

Asynchronous circuits and systems in superconducting RSFQ digital technology

Z.J. Deng, Nobuyuki Yoshikawa, J. Tierno +2 more

Superconductive Rapid Single Flux Quantum (RSFQ) logic and memory, in which ones and zeros are represented by the presence or absence within a timing window of quantized picosecond voltage pulse (/spl int/v(t)dt=h/2e=2.07 mV/spl middot/ps), corresponding to one SFQ, can be integrated into a digital computing system with an operating rate of several tens of GHz, based on the present Nb Josephson junction integrated circuit technology. It is the most promising technology beyond semiconductor transistors for low-power high-end computation. However, as the operating speed of circuits and systems increase, timing uncertainty from fabrication process variations makes global synchronization very hard. In this paper, we present a globally asynchronous, locally synchronous timing methodology for RSFQ digital design, which can solve the global synchronization problem. We also demonstrate the recent experimental results of some asynchronous circuits and systems implemented in RSFQ technology. Several key components such as a self-timed shift register, a self-timed demultiplexor, a Muller-C element, a completion detector, and a clock generator have been designed and tested. High speed operation has been confirmed up to 20 Gb/s for a prototype data buffer system, which consists two self-timed shift registers and an on-chip 5-38 GHz clock generator.

IEEE International Symposium on Asynchronous Circuits and Systems (ASYNC)•Nov 27, 2002•7 citations

Optimised asynchronous timing for superconductive digital circuits

H.R. Gerber, Coenrad Johann Fourie, Willem Jakobus Perold

Rapid Single Flux Quantum (RSFQ) logic is a digital circuit technology that in recent years has presented itself as an alternative to semiconductors in the application of ultra high speed, very low power applications. The optimal timing of digital circuits operating at hundreds of Gigahertz is still a complex problem for both RSFQ and semiconductor technologies. The fact that most RSFQ gates require a clock signal to function makes this even more complex. Various RSFQ liming schemes have been adapted from semiconductor design methodologies, and some have been designed specifically for RSFQ. Currently, synchronous clocking schemes outperform other schemes, but with the scale of RSFQ circuits ever increasing, the proper use of timing schemes are becoming more crucial. This paper describes a new asynchronous self-timing scheme where the details of clock distribution and clocking are built into the logic gates. Tests were done on the newly developed asynchronous logic-gales and a asynchronous full adder was implemented and tested.

SAIEE Africa Research Journal•Sep 1, 2006•0 citations
This paper describes the results of a preliminary analysis of ultra-fast low-power superconductor digital switches based on Rapid Single-Flux-Quantum (RSFQ) technology. In particular, RSFQ-based crossbar, Batcher-banyan, and shared bus switching cores have been considered, and the possible parameters of these circuits have been estimated. The results show that the proposed RSFQ digital switches with overall throughput of 7.5 Tbps operating at an internal clock frequency of /spl sim/60 GHz and dissipating very little power could effectively compete with their semiconductor and photonic counterparts.
We have carried out a paper feasibility study of the implementation of most common packet switching cores (crossbar, Batcher-banyan, time-division shared bus, and token ring) using the superconductor rapid single flux quantum (RSFQ) digital technology. According to our estimates, the best performance-to-complexity ratio may be obtained for the Batcher-banyan network. For example, a 128 by 128 switching core with self-routing (but without address translation, contention resolution, and broadcast features), consisting of about 180,000 Josephson junctions with the internal clock frequency of 60 GHz could handle a workload of 7.5 Tbps. This core could fit on a single 1 cm by 1 cm chip and dissipate as low as 45 mW. The estimated parameters are achievable using a simple 1.5-micrometer niobium- trilayer technology.
Key digital circuits for signal processing with tens of gigahertz speed and a few microwatts power dissipation have been recently demonstrated using a simple, 2 /spl mu/m linewidth process. These are the fastest digital circuits reported to date. These circuits use novel rapid single flux quantum (RSFQ) technology that takes advantage of the fundamental properties of superconductivity. In this technology, data and clock are picosecond-long quantized voltage pulses corresponding to the transfer of single magnetic flux quanta, /spl Phisub 0/=h/2e=2 mVps. These SFQ pulses are regenerated at each gate and are processed by circuits comprised of overdamped Josephson junctions interconnected via microstrip inductances. The inherent internal memory of all RSFQ gates (primarily flip-flops), combined with high switching speed, makes serial, bit-pipelined circuit design advantageous. This paper presents experiments in RSFQ digital circuits, including an N/spl times/8b serial multiplier, and on-chip test systems based on RSFQ shift registers and on SFQ samplers. They enable test and study of RSFQ circuits at full GHz speed while communicating with semiconductor electronics at low speed.>
Internet traffic loads are increasing. Sustaining packet switching throughput of a core node will be difficult. A major reason for this is power consumption and packaging volume. As long as we use only current semiconductor technology, the switching capacity will be limited. Rapid single flux quantum (RSFQ) superconducting technology can overcome such difficulties because of high-speed operation and low-power consumption characteristics. A superconducting wiring also enables high-speed inter-chip communication. We report on progress on packet switch circuit implementation and cryo-cooled packaging for a RSFQ packet switch system. In addition, we discuss a possible packet switch architecture over 100 Tbps that uses RSFQ technology.
Rapid single flux quantum (RSFQ) logic is a digital circuit technology that in recent years has presented itself as an alternative to semiconductors in the application of ultra high speed, very low power applications. The optimal timing of digital circuits operating at hundreds of GHz is still a complex problem for both RSFQ and semiconductor technologies. The fact that most RSFQ gates require a clock signal to function makes this even more complex. Various RSFQ timing schemes have been adapted from semiconductor design methodologies, and some have been designed specifically for RSFQ. Currently, synchronous clocking schemes outperform other schemes, but with the scale of RSFQ circuits ever increasing, the proper use of timing schemes are becoming more crucial. This paper describes a new asynchronous self-timing scheme where the details of clock distribution and clocking are built into the logic gates. Tests were done on the newly developed asynchronous logic gates and an asynchronous full adder was implemented and tested
Superconductive Rapid Single Flux Quantum (RSFQ) logic and memory, in which ones and zeros are represented by the presence or absence within a timing window of quantized picosecond voltage pulse (/spl int/v(t)dt=h/2e=2.07 mV/spl middot/ps), corresponding to one SFQ, can be integrated into a digital computing system with an operating rate of several tens of GHz, based on the present Nb Josephson junction integrated circuit technology. It is the most promising technology beyond semiconductor transistors for low-power high-end computation. However, as the operating speed of circuits and systems increase, timing uncertainty from fabrication process variations makes global synchronization very hard. In this paper, we present a globally asynchronous, locally synchronous timing methodology for RSFQ digital design, which can solve the global synchronization problem. We also demonstrate the recent experimental results of some asynchronous circuits and systems implemented in RSFQ technology. Several key components such as a self-timed shift register, a self-timed demultiplexor, a Muller-C element, a completion detector, and a clock generator have been designed and tested. High speed operation has been confirmed up to 20 Gb/s for a prototype data buffer system, which consists two self-timed shift registers and an on-chip 5-38 GHz clock generator.
Rapid Single Flux Quantum (RSFQ) logic is a digital circuit technology that in recent years has presented itself as an alternative to semiconductors in the application of ultra high speed, very low power applications. The optimal timing of digital circuits operating at hundreds of Gigahertz is still a complex problem for both RSFQ and semiconductor technologies. The fact that most RSFQ gates require a clock signal to function makes this even more complex. Various RSFQ liming schemes have been adapted from semiconductor design methodologies, and some have been designed specifically for RSFQ. Currently, synchronous clocking schemes outperform other schemes, but with the scale of RSFQ circuits ever increasing, the proper use of timing schemes are becoming more crucial. This paper describes a new asynchronous self-timing scheme where the details of clock distribution and clocking are built into the logic gates. Tests were done on the newly developed asynchronous logic-gales and a asynchronous full adder was implemented and tested.