Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

SAIEE Africa Research Journal

Optimised asynchronous timing for superconductive digital circuits

H.R. Gerber, Coenrad Johann Fourie, Willem Jakobus Perold

Published Sep 1, 2006• 0 citations
Publisher

Abstract

Rapid Single Flux Quantum (RSFQ) logic is a digital circuit technology that in recent years has presented itself as an alternative to semiconductors in the application of ultra high speed, very low power applications. The optimal timing of digital circuits operating at hundreds of Gigahertz is still a complex problem for both RSFQ and semiconductor technologies. The fact that most RSFQ gates require a clock signal to function makes this even more complex. Various RSFQ liming schemes have been adapted from semiconductor design methodologies, and some have been designed specifically for RSFQ. Currently, synchronous clocking schemes outperform other schemes, but with the scale of RSFQ circuits ever increasing, the proper use of timing schemes are becoming more crucial. This paper describes a new asynchronous self-timing scheme where the details of clock distribution and clocking are built into the logic gates. Tests were done on the newly developed asynchronous logic-gales and a asynchronous full adder was implemented and tested.

DOI
10.23919/saiee.2006.9487898

Related papers

Optimised asynchronous self-timing for superconducting RSFQ logic circuits

H.R. Gerber, Coenrad Johann Fourie, Willem Jakobus Perold

Rapid single flux quantum (RSFQ) logic is a digital circuit technology that in recent years has presented itself as an alternative to semiconductors in the application of ultra high speed, very low power applications. The optimal timing of digital circuits operating at hundreds of GHz is still a complex problem for both RSFQ and semiconductor technologies. The fact that most RSFQ gates require a clock signal to function makes this even more complex. Various RSFQ timing schemes have been adapted from semiconductor design methodologies, and some have been designed specifically for RSFQ. Currently, synchronous clocking schemes outperform other schemes, but with the scale of RSFQ circuits ever increasing, the proper use of timing schemes are becoming more crucial. This paper describes a new asynchronous self-timing scheme where the details of clock distribution and clocking are built into the logic gates. Tests were done on the newly developed asynchronous logic gates and an asynchronous full adder was implemented and tested

IEEE AFRICON•Apr 6, 2005•2 citations

Asynchronous circuits and systems in superconducting RSFQ digital technology

Z.J. Deng, Nobuyuki Yoshikawa, J. Tierno +2 more

Superconductive Rapid Single Flux Quantum (RSFQ) logic and memory, in which ones and zeros are represented by the presence or absence within a timing window of quantized picosecond voltage pulse (/spl int/v(t)dt=h/2e=2.07 mV/spl middot/ps), corresponding to one SFQ, can be integrated into a digital computing system with an operating rate of several tens of GHz, based on the present Nb Josephson junction integrated circuit technology. It is the most promising technology beyond semiconductor transistors for low-power high-end computation. However, as the operating speed of circuits and systems increase, timing uncertainty from fabrication process variations makes global synchronization very hard. In this paper, we present a globally asynchronous, locally synchronous timing methodology for RSFQ digital design, which can solve the global synchronization problem. We also demonstrate the recent experimental results of some asynchronous circuits and systems implemented in RSFQ technology. Several key components such as a self-timed shift register, a self-timed demultiplexor, a Muller-C element, a completion detector, and a clock generator have been designed and tested. High speed operation has been confirmed up to 20 Gb/s for a prototype data buffer system, which consists two self-timed shift registers and an on-chip 5-38 GHz clock generator.

IEEE International Symposium on Asynchronous Circuits and Systems (ASYNC)•Nov 27, 2002•7 citations

Superconductive single-flux quantum technology

Oleg A. Mukhanov

Key digital circuits for signal processing with tens of gigahertz speed and a few microwatts power dissipation have been recently demonstrated using a simple, 2 /spl mu/m linewidth process. These are the fastest digital circuits reported to date. These circuits use novel rapid single flux quantum (RSFQ) technology that takes advantage of the fundamental properties of superconductivity. In this technology, data and clock are picosecond-long quantized voltage pulses corresponding to the transfer of single magnetic flux quanta, /spl Phisub 0/=h/2e=2 mVps. These SFQ pulses are regenerated at each gate and are processed by circuits comprised of overdamped Josephson junctions interconnected via microstrip inductances. The inherent internal memory of all RSFQ gates (primarily flip-flops), combined with high switching speed, makes serial, bit-pipelined circuit design advantageous. This paper presents experiments in RSFQ digital circuits, including an N/spl times/8b serial multiplier, and on-chip test systems based on RSFQ shift registers and on SFQ samplers. They enable test and study of RSFQ circuits at full GHz speed while communicating with semiconductor electronics at low speed.>

Digest of technical papers/Digest of technical papers - IEEE International Solid-State Circuits Conference•Dec 17, 2002•8 citations

A basic circuit for asynchronous superconductive logic using RSFQ gates

I. Kurosawa, Hiroshi Nakagawa, Masahiro Aoyagi +3 more

This paper presents a basic circuit concept for pulse-driven asynchronous circuits using superconducting rapid single-flux-quantum (RSFQ) logic gates. Today's computer systems perform using a synchronous clock distributed over the whole system. The distribution of the clock signal becomes more difficult as the clock frequency increases because the wavelength of the clock signal becomes shorter than the system size. One way to solve this problem is to use asynchronous circuits in which all circuits perform their functions only under the law of cause and effect. We propose an implementation of the basic asynchronous circuit performing OR/AND logic operations between SFQ pulses. The operations are confirmed by SPICE simulation. We will show a design method for combinational circuits using the proposed basic circuits.

Superconductor Science and Technology•Apr 1, 1996•12 citations

Asynchronous Dynamic Single-Flux Quantum Majority Gates

Gleb Krylov, Eby G. Friedman

Among the major issues in modern large-scale rapid single-flux quantum (RSFQ) circuits are the complexity of the clock network, tight timing tolerances, poor applicability of existing CMOS-based design algorithms, and extremely deep pipelines, which reduce the effective clock frequency. In this article, asynchronous dynamic single-flux quantum majority gates are proposed to solve some of these problems. The proposed logic gates exhibit high bias margins and do not require significant area or a large number of Josephson junctions as compared to existing RSFQ logic gates. These gates exhibit a tradeoff among the input skew tolerance, clock frequency, and bias margins. Asynchronous logic gates greatly reduce the complexity of the clock network in large-scale RSFQ circuits, thereby alleviating certain timing issues and reducing the required bias currents. Furthermore, asynchronous logic allows existing design algorithms to utilize CMOS approaches for synthesis, verification, and testability. The adoption of majority logic in complex RSFQ circuits also reduces the pipeline depth, enabling higher clock speeds in very large scale integration RSFQ circuits.

IEEE Transactions on Applied Superconductivity•Mar 4, 2020•39 citations

Data-driven self-timed RSFQ digital integrated circuit and system

Z.J. Deng, Nobuyuki Yoshikawa, Stephen R. Whiteley +1 more

A novel asynchronous timing scheme, data-driven self-timing (DDST) is proposed and implemented in Rapid Single-Flux-Quantum (RSFQ) superconductive integrated circuits. In this asynchronous approach, the timing signals are generated from the data and no global clock is needed to drive the RSFQ circuit and system. The essence of the self-timing scheme is to localize the system timing in order to avoid the overhead of global clock distribution, and to minimize the timing uncertainty. The DDST scheme has been applied to the design of a shift register, a demultiplexor, and a self-timed high speed digital test system. In this paper, test results of a 4-bit DDST shift register and a high speed on-chip clock generator will be presented to demonstrate the successful DDST operation of RSFQ integrated circuits at a rate of 20 Gb/s.

IEEE Transactions on Applied Superconductivity•Jun 1, 1997•104 citations
Rapid Single Flux Quantum (RSFQ) logic is a digital circuit technology that in recent years has presented itself as an alternative to semiconductors in the application of ultra high speed, very low power applications. The optimal timing of digital circuits operating at hundreds of Gigahertz is still a complex problem for both RSFQ and semiconductor technologies. The fact that most RSFQ gates require a clock signal to function makes this even more complex. Various RSFQ liming schemes have been adapted from semiconductor design methodologies, and some have been designed specifically for RSFQ. Currently, synchronous clocking schemes outperform other schemes, but with the scale of RSFQ circuits ever increasing, the proper use of timing schemes are becoming more crucial. This paper describes a new asynchronous self-timing scheme where the details of clock distribution and clocking are built into the logic gates. Tests were done on the newly developed asynchronous logic-gales and a asynchronous full adder was implemented and tested.
Rapid single flux quantum (RSFQ) logic is a digital circuit technology that in recent years has presented itself as an alternative to semiconductors in the application of ultra high speed, very low power applications. The optimal timing of digital circuits operating at hundreds of GHz is still a complex problem for both RSFQ and semiconductor technologies. The fact that most RSFQ gates require a clock signal to function makes this even more complex. Various RSFQ timing schemes have been adapted from semiconductor design methodologies, and some have been designed specifically for RSFQ. Currently, synchronous clocking schemes outperform other schemes, but with the scale of RSFQ circuits ever increasing, the proper use of timing schemes are becoming more crucial. This paper describes a new asynchronous self-timing scheme where the details of clock distribution and clocking are built into the logic gates. Tests were done on the newly developed asynchronous logic gates and an asynchronous full adder was implemented and tested
Superconductive Rapid Single Flux Quantum (RSFQ) logic and memory, in which ones and zeros are represented by the presence or absence within a timing window of quantized picosecond voltage pulse (/spl int/v(t)dt=h/2e=2.07 mV/spl middot/ps), corresponding to one SFQ, can be integrated into a digital computing system with an operating rate of several tens of GHz, based on the present Nb Josephson junction integrated circuit technology. It is the most promising technology beyond semiconductor transistors for low-power high-end computation. However, as the operating speed of circuits and systems increase, timing uncertainty from fabrication process variations makes global synchronization very hard. In this paper, we present a globally asynchronous, locally synchronous timing methodology for RSFQ digital design, which can solve the global synchronization problem. We also demonstrate the recent experimental results of some asynchronous circuits and systems implemented in RSFQ technology. Several key components such as a self-timed shift register, a self-timed demultiplexor, a Muller-C element, a completion detector, and a clock generator have been designed and tested. High speed operation has been confirmed up to 20 Gb/s for a prototype data buffer system, which consists two self-timed shift registers and an on-chip 5-38 GHz clock generator.
Key digital circuits for signal processing with tens of gigahertz speed and a few microwatts power dissipation have been recently demonstrated using a simple, 2 /spl mu/m linewidth process. These are the fastest digital circuits reported to date. These circuits use novel rapid single flux quantum (RSFQ) technology that takes advantage of the fundamental properties of superconductivity. In this technology, data and clock are picosecond-long quantized voltage pulses corresponding to the transfer of single magnetic flux quanta, /spl Phisub 0/=h/2e=2 mVps. These SFQ pulses are regenerated at each gate and are processed by circuits comprised of overdamped Josephson junctions interconnected via microstrip inductances. The inherent internal memory of all RSFQ gates (primarily flip-flops), combined with high switching speed, makes serial, bit-pipelined circuit design advantageous. This paper presents experiments in RSFQ digital circuits, including an N/spl times/8b serial multiplier, and on-chip test systems based on RSFQ shift registers and on SFQ samplers. They enable test and study of RSFQ circuits at full GHz speed while communicating with semiconductor electronics at low speed.>
This paper presents a basic circuit concept for pulse-driven asynchronous circuits using superconducting rapid single-flux-quantum (RSFQ) logic gates. Today's computer systems perform using a synchronous clock distributed over the whole system. The distribution of the clock signal becomes more difficult as the clock frequency increases because the wavelength of the clock signal becomes shorter than the system size. One way to solve this problem is to use asynchronous circuits in which all circuits perform their functions only under the law of cause and effect. We propose an implementation of the basic asynchronous circuit performing OR/AND logic operations between SFQ pulses. The operations are confirmed by SPICE simulation. We will show a design method for combinational circuits using the proposed basic circuits.
Among the major issues in modern large-scale rapid single-flux quantum (RSFQ) circuits are the complexity of the clock network, tight timing tolerances, poor applicability of existing CMOS-based design algorithms, and extremely deep pipelines, which reduce the effective clock frequency. In this article, asynchronous dynamic single-flux quantum majority gates are proposed to solve some of these problems. The proposed logic gates exhibit high bias margins and do not require significant area or a large number of Josephson junctions as compared to existing RSFQ logic gates. These gates exhibit a tradeoff among the input skew tolerance, clock frequency, and bias margins. Asynchronous logic gates greatly reduce the complexity of the clock network in large-scale RSFQ circuits, thereby alleviating certain timing issues and reducing the required bias currents. Furthermore, asynchronous logic allows existing design algorithms to utilize CMOS approaches for synthesis, verification, and testability. The adoption of majority logic in complex RSFQ circuits also reduces the pipeline depth, enabling higher clock speeds in very large scale integration RSFQ circuits.
A novel asynchronous timing scheme, data-driven self-timing (DDST) is proposed and implemented in Rapid Single-Flux-Quantum (RSFQ) superconductive integrated circuits. In this asynchronous approach, the timing signals are generated from the data and no global clock is needed to drive the RSFQ circuit and system. The essence of the self-timing scheme is to localize the system timing in order to avoid the overhead of global clock distribution, and to minimize the timing uncertainty. The DDST scheme has been applied to the design of a shift register, a demultiplexor, and a self-timed high speed digital test system. In this paper, test results of a 4-bit DDST shift register and a high speed on-chip clock generator will be presented to demonstrate the successful DDST operation of RSFQ integrated circuits at a rate of 20 Gb/s.