Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

Superconductor Science and Technology

A basic circuit for asynchronous superconductive logic using RSFQ gates

I. Kurosawa, Hiroshi Nakagawa, Masahiro Aoyagi, Masaaki Maezawa, Y Kameda, Takashi Nanya

Published Apr 1, 1996• 12 citations
Publisher

Abstract

This paper presents a basic circuit concept for pulse-driven asynchronous circuits using superconducting rapid single-flux-quantum (RSFQ) logic gates. Today's computer systems perform using a synchronous clock distributed over the whole system. The distribution of the clock signal becomes more difficult as the clock frequency increases because the wavelength of the clock signal becomes shorter than the system size. One way to solve this problem is to use asynchronous circuits in which all circuits perform their functions only under the law of cause and effect. We propose an implementation of the basic asynchronous circuit performing OR/AND logic operations between SFQ pulses. The operations are confirmed by SPICE simulation. We will show a design method for combinational circuits using the proposed basic circuits.

DOI
10.1088/0953-2048/9/4a/013

Related papers

Optimised asynchronous self-timing for superconducting RSFQ logic circuits

H.R. Gerber, Coenrad Johann Fourie, Willem Jakobus Perold

Rapid single flux quantum (RSFQ) logic is a digital circuit technology that in recent years has presented itself as an alternative to semiconductors in the application of ultra high speed, very low power applications. The optimal timing of digital circuits operating at hundreds of GHz is still a complex problem for both RSFQ and semiconductor technologies. The fact that most RSFQ gates require a clock signal to function makes this even more complex. Various RSFQ timing schemes have been adapted from semiconductor design methodologies, and some have been designed specifically for RSFQ. Currently, synchronous clocking schemes outperform other schemes, but with the scale of RSFQ circuits ever increasing, the proper use of timing schemes are becoming more crucial. This paper describes a new asynchronous self-timing scheme where the details of clock distribution and clocking are built into the logic gates. Tests were done on the newly developed asynchronous logic gates and an asynchronous full adder was implemented and tested

IEEE AFRICON•Apr 6, 2005•2 citations

Asynchronous circuits and systems in superconducting RSFQ digital technology

Z.J. Deng, Nobuyuki Yoshikawa, J. Tierno +2 more

Superconductive Rapid Single Flux Quantum (RSFQ) logic and memory, in which ones and zeros are represented by the presence or absence within a timing window of quantized picosecond voltage pulse (/spl int/v(t)dt=h/2e=2.07 mV/spl middot/ps), corresponding to one SFQ, can be integrated into a digital computing system with an operating rate of several tens of GHz, based on the present Nb Josephson junction integrated circuit technology. It is the most promising technology beyond semiconductor transistors for low-power high-end computation. However, as the operating speed of circuits and systems increase, timing uncertainty from fabrication process variations makes global synchronization very hard. In this paper, we present a globally asynchronous, locally synchronous timing methodology for RSFQ digital design, which can solve the global synchronization problem. We also demonstrate the recent experimental results of some asynchronous circuits and systems implemented in RSFQ technology. Several key components such as a self-timed shift register, a self-timed demultiplexor, a Muller-C element, a completion detector, and a clock generator have been designed and tested. High speed operation has been confirmed up to 20 Gb/s for a prototype data buffer system, which consists two self-timed shift registers and an on-chip 5-38 GHz clock generator.

IEEE International Symposium on Asynchronous Circuits and Systems (ASYNC)•Nov 27, 2002•7 citations

Optimised asynchronous timing for superconductive digital circuits

H.R. Gerber, Coenrad Johann Fourie, Willem Jakobus Perold

Rapid Single Flux Quantum (RSFQ) logic is a digital circuit technology that in recent years has presented itself as an alternative to semiconductors in the application of ultra high speed, very low power applications. The optimal timing of digital circuits operating at hundreds of Gigahertz is still a complex problem for both RSFQ and semiconductor technologies. The fact that most RSFQ gates require a clock signal to function makes this even more complex. Various RSFQ liming schemes have been adapted from semiconductor design methodologies, and some have been designed specifically for RSFQ. Currently, synchronous clocking schemes outperform other schemes, but with the scale of RSFQ circuits ever increasing, the proper use of timing schemes are becoming more crucial. This paper describes a new asynchronous self-timing scheme where the details of clock distribution and clocking are built into the logic gates. Tests were done on the newly developed asynchronous logic-gales and a asynchronous full adder was implemented and tested.

SAIEE Africa Research Journal•Sep 1, 2006•0 citations

Pulse-driven dual-rail logic gate family based on rapid single-flux-quantum (RSFQ) devices for asynchronous circuits

Masaaki Maezawa, I. Kurosawa, Y. Kameda +1 more

We present a pulse-driven asynchronous logic gate family based on a high-speed, low-power Josephson-junction device of rapid single-flux-quantum (RSFQ) circuits. Dual-rail logic is used and clock-free operation is realized. The proper operation of the circuits is confirmed by the numerical simulation which shows logic delays are about 60 ps for an AND and about 80 ps for an XOR. Power consumption is estimated to be 10 /spl mu/W/gate.

IEEE International Symposium on Asynchronous Circuits and Systems (ASYNC)•Dec 23, 2002•17 citations

Asynchronous Dynamic Single-Flux Quantum Majority Gates

Gleb Krylov, Eby G. Friedman

Among the major issues in modern large-scale rapid single-flux quantum (RSFQ) circuits are the complexity of the clock network, tight timing tolerances, poor applicability of existing CMOS-based design algorithms, and extremely deep pipelines, which reduce the effective clock frequency. In this article, asynchronous dynamic single-flux quantum majority gates are proposed to solve some of these problems. The proposed logic gates exhibit high bias margins and do not require significant area or a large number of Josephson junctions as compared to existing RSFQ logic gates. These gates exhibit a tradeoff among the input skew tolerance, clock frequency, and bias margins. Asynchronous logic gates greatly reduce the complexity of the clock network in large-scale RSFQ circuits, thereby alleviating certain timing issues and reducing the required bias currents. Furthermore, asynchronous logic allows existing design algorithms to utilize CMOS approaches for synthesis, verification, and testability. The adoption of majority logic in complex RSFQ circuits also reduces the pipeline depth, enabling higher clock speeds in very large scale integration RSFQ circuits.

IEEE Transactions on Applied Superconductivity•Mar 4, 2020•39 citations

Rapid single-flux-quantum dual-rail logic for asynchronous circuits

Masaaki Maezawa, I. Kurosawa, Masahiro Aoyagi +3 more

Dual-rail logic circuit elements based on rapid single-flux-quantum (RSFQ) technology have been designed and simulated. The proposed circuits can operate asynchronously, since dual-rail data include timing information in themselves. Therefore dual-rail logic scheme has a possibility of solving some problems of RSFQ circuits with flow clocking, which would become more serious as operating speed and complexity of the circuit increase. Implementation of RSFQ dual-rail AND and XOR cells is described. A scheme of transfer-ring data from a flow-clocked circuit to a parallel dual-rail circuit is also proposed, which a fully asynchronous dual-rail demultiplexer.

IEEE Transactions on Applied Superconductivity•Jun 1, 1997•31 citations
This paper presents a basic circuit concept for pulse-driven asynchronous circuits using superconducting rapid single-flux-quantum (RSFQ) logic gates. Today's computer systems perform using a synchronous clock distributed over the whole system. The distribution of the clock signal becomes more difficult as the clock frequency increases because the wavelength of the clock signal becomes shorter than the system size. One way to solve this problem is to use asynchronous circuits in which all circuits perform their functions only under the law of cause and effect. We propose an implementation of the basic asynchronous circuit performing OR/AND logic operations between SFQ pulses. The operations are confirmed by SPICE simulation. We will show a design method for combinational circuits using the proposed basic circuits.
Rapid single flux quantum (RSFQ) logic is a digital circuit technology that in recent years has presented itself as an alternative to semiconductors in the application of ultra high speed, very low power applications. The optimal timing of digital circuits operating at hundreds of GHz is still a complex problem for both RSFQ and semiconductor technologies. The fact that most RSFQ gates require a clock signal to function makes this even more complex. Various RSFQ timing schemes have been adapted from semiconductor design methodologies, and some have been designed specifically for RSFQ. Currently, synchronous clocking schemes outperform other schemes, but with the scale of RSFQ circuits ever increasing, the proper use of timing schemes are becoming more crucial. This paper describes a new asynchronous self-timing scheme where the details of clock distribution and clocking are built into the logic gates. Tests were done on the newly developed asynchronous logic gates and an asynchronous full adder was implemented and tested
Superconductive Rapid Single Flux Quantum (RSFQ) logic and memory, in which ones and zeros are represented by the presence or absence within a timing window of quantized picosecond voltage pulse (/spl int/v(t)dt=h/2e=2.07 mV/spl middot/ps), corresponding to one SFQ, can be integrated into a digital computing system with an operating rate of several tens of GHz, based on the present Nb Josephson junction integrated circuit technology. It is the most promising technology beyond semiconductor transistors for low-power high-end computation. However, as the operating speed of circuits and systems increase, timing uncertainty from fabrication process variations makes global synchronization very hard. In this paper, we present a globally asynchronous, locally synchronous timing methodology for RSFQ digital design, which can solve the global synchronization problem. We also demonstrate the recent experimental results of some asynchronous circuits and systems implemented in RSFQ technology. Several key components such as a self-timed shift register, a self-timed demultiplexor, a Muller-C element, a completion detector, and a clock generator have been designed and tested. High speed operation has been confirmed up to 20 Gb/s for a prototype data buffer system, which consists two self-timed shift registers and an on-chip 5-38 GHz clock generator.
Rapid Single Flux Quantum (RSFQ) logic is a digital circuit technology that in recent years has presented itself as an alternative to semiconductors in the application of ultra high speed, very low power applications. The optimal timing of digital circuits operating at hundreds of Gigahertz is still a complex problem for both RSFQ and semiconductor technologies. The fact that most RSFQ gates require a clock signal to function makes this even more complex. Various RSFQ liming schemes have been adapted from semiconductor design methodologies, and some have been designed specifically for RSFQ. Currently, synchronous clocking schemes outperform other schemes, but with the scale of RSFQ circuits ever increasing, the proper use of timing schemes are becoming more crucial. This paper describes a new asynchronous self-timing scheme where the details of clock distribution and clocking are built into the logic gates. Tests were done on the newly developed asynchronous logic-gales and a asynchronous full adder was implemented and tested.
Among the major issues in modern large-scale rapid single-flux quantum (RSFQ) circuits are the complexity of the clock network, tight timing tolerances, poor applicability of existing CMOS-based design algorithms, and extremely deep pipelines, which reduce the effective clock frequency. In this article, asynchronous dynamic single-flux quantum majority gates are proposed to solve some of these problems. The proposed logic gates exhibit high bias margins and do not require significant area or a large number of Josephson junctions as compared to existing RSFQ logic gates. These gates exhibit a tradeoff among the input skew tolerance, clock frequency, and bias margins. Asynchronous logic gates greatly reduce the complexity of the clock network in large-scale RSFQ circuits, thereby alleviating certain timing issues and reducing the required bias currents. Furthermore, asynchronous logic allows existing design algorithms to utilize CMOS approaches for synthesis, verification, and testability. The adoption of majority logic in complex RSFQ circuits also reduces the pipeline depth, enabling higher clock speeds in very large scale integration RSFQ circuits.
Dual-rail logic circuit elements based on rapid single-flux-quantum (RSFQ) technology have been designed and simulated. The proposed circuits can operate asynchronously, since dual-rail data include timing information in themselves. Therefore dual-rail logic scheme has a possibility of solving some problems of RSFQ circuits with flow clocking, which would become more serious as operating speed and complexity of the circuit increase. Implementation of RSFQ dual-rail AND and XOR cells is described. A scheme of transfer-ring data from a flow-clocked circuit to a parallel dual-rail circuit is also proposed, which a fully asynchronous dual-rail demultiplexer.