IEEE AFRICON

Optimised asynchronous self-timing for superconducting RSFQ logic circuits

H.R. Gerber, Coenrad Johann Fourie, Willem Jakobus Perold

Published Apr 6, 2005• 2 citations

Abstract

Rapid single flux quantum (RSFQ) logic is a digital circuit technology that in recent years has presented itself as an alternative to semiconductors in the application of ultra high speed, very low power applications. The optimal timing of digital circuits operating at hundreds of GHz is still a complex problem for both RSFQ and semiconductor technologies. The fact that most RSFQ gates require a clock signal to function makes this even more complex. Various RSFQ timing schemes have been adapted from semiconductor design methodologies, and some have been designed specifically for RSFQ. Currently, synchronous clocking schemes outperform other schemes, but with the scale of RSFQ circuits ever increasing, the proper use of timing schemes are becoming more crucial. This paper describes a new asynchronous self-timing scheme where the details of clock distribution and clocking are built into the logic gates. Tests were done on the newly developed asynchronous logic gates and an asynchronous full adder was implemented and tested

DOI: 10.1109/africon.2004.1406739

Related papers

Optimised asynchronous timing for superconductive digital circuits

H.R. Gerber, Coenrad Johann Fourie, Willem Jakobus Perold

Rapid Single Flux Quantum (RSFQ) logic is a digital circuit technology that in recent years has presented itself as an alternative to semiconductors in the application of ultra high speed, very low power applications. The optimal timing of digital circuits operating at hundreds of Gigahertz is still a complex problem for both RSFQ and semiconductor technologies. The fact that most RSFQ gates require a clock signal to function makes this even more complex. Various RSFQ liming schemes have been adapted from semiconductor design methodologies, and some have been designed specifically for RSFQ. Currently, synchronous clocking schemes outperform other schemes, but with the scale of RSFQ circuits ever increasing, the proper use of timing schemes are becoming more crucial. This paper describes a new asynchronous self-timing scheme where the details of clock distribution and clocking are built into the logic gates. Tests were done on the newly developed asynchronous logic-gales and a asynchronous full adder was implemented and tested.

SAIEE Africa Research JournalSep 1, 20060 citations

Asynchronous circuits and systems in superconducting RSFQ digital technology

Z.J. Deng, Nobuyuki Yoshikawa, J. Tierno +2 more

Superconductive Rapid Single Flux Quantum (RSFQ) logic and memory, in which ones and zeros are represented by the presence or absence within a timing window of quantized picosecond voltage pulse (/spl int/v(t)dt=h/2e=2.07 mV/spl middot/ps), corresponding to one SFQ, can be integrated into a digital computing system with an operating rate of several tens of GHz, based on the present Nb Josephson junction integrated circuit technology. It is the most promising technology beyond semiconductor transistors for low-power high-end computation. However, as the operating speed of circuits and systems increase, timing uncertainty from fabrication process variations makes global synchronization very hard. In this paper, we present a globally asynchronous, locally synchronous timing methodology for RSFQ digital design, which can solve the global synchronization problem. We also demonstrate the recent experimental results of some asynchronous circuits and systems implemented in RSFQ technology. Several key components such as a self-timed shift register, a self-timed demultiplexor, a Muller-C element, a completion detector, and a clock generator have been designed and tested. High speed operation has been confirmed up to 20 Gb/s for a prototype data buffer system, which consists two self-timed shift registers and an on-chip 5-38 GHz clock generator.

IEEE International Symposium on Asynchronous Circuits and Systems (ASYNC)Nov 27, 20027 citations

A basic circuit for asynchronous superconductive logic using RSFQ gates

I. Kurosawa, Hiroshi Nakagawa, Masahiro Aoyagi +3 more

This paper presents a basic circuit concept for pulse-driven asynchronous circuits using superconducting rapid single-flux-quantum (RSFQ) logic gates. Today's computer systems perform using a synchronous clock distributed over the whole system. The distribution of the clock signal becomes more difficult as the clock frequency increases because the wavelength of the clock signal becomes shorter than the system size. One way to solve this problem is to use asynchronous circuits in which all circuits perform their functions only under the law of cause and effect. We propose an implementation of the basic asynchronous circuit performing OR/AND logic operations between SFQ pulses. The operations are confirmed by SPICE simulation. We will show a design method for combinational circuits using the proposed basic circuits.

Superconductor Science and TechnologyApr 1, 199612 citations

Asynchronous Dynamic Single-Flux Quantum Majority Gates

Gleb Krylov, Eby G. Friedman

Among the major issues in modern large-scale rapid single-flux quantum (RSFQ) circuits are the complexity of the clock network, tight timing tolerances, poor applicability of existing CMOS-based design algorithms, and extremely deep pipelines, which reduce the effective clock frequency. In this article, asynchronous dynamic single-flux quantum majority gates are proposed to solve some of these problems. The proposed logic gates exhibit high bias margins and do not require significant area or a large number of Josephson junctions as compared to existing RSFQ logic gates. These gates exhibit a tradeoff among the input skew tolerance, clock frequency, and bias margins. Asynchronous logic gates greatly reduce the complexity of the clock network in large-scale RSFQ circuits, thereby alleviating certain timing issues and reducing the required bias currents. Furthermore, asynchronous logic allows existing design algorithms to utilize CMOS approaches for synthesis, verification, and testability. The adoption of majority logic in complex RSFQ circuits also reduces the pipeline depth, enabling higher clock speeds in very large scale integration RSFQ circuits.

IEEE Transactions on Applied SuperconductivityMar 4, 202039 citations

Data-driven self-timed RSFQ digital integrated circuit and system

Z.J. Deng, Nobuyuki Yoshikawa, Stephen R. Whiteley +1 more

A novel asynchronous timing scheme, data-driven self-timing (DDST) is proposed and implemented in Rapid Single-Flux-Quantum (RSFQ) superconductive integrated circuits. In this asynchronous approach, the timing signals are generated from the data and no global clock is needed to drive the RSFQ circuit and system. The essence of the self-timing scheme is to localize the system timing in order to avoid the overhead of global clock distribution, and to minimize the timing uncertainty. The DDST scheme has been applied to the design of a shift register, a demultiplexor, and a self-timed high speed digital test system. In this paper, test results of a 4-bit DDST shift register and a high speed on-chip clock generator will be presented to demonstrate the successful DDST operation of RSFQ integrated circuits at a rate of 20 Gb/s.

IEEE Transactions on Applied SuperconductivityJun 1, 1997104 citations

Design of superconductor digital circuits for a 30 GHz DSP and for interface to qubits

Samuel Intiso

Superconducting digital technology based on Rapid Single Flux Quantum logic (RSFQ) is a digital technology characterized by high speed, low power consumption and low operational temperatures. RSFQ is attractive for many applications and in particular for high frequency Digital Signal Processing (DSP) and for digital control of mK devices like superconducting qubits. Due to the 30 GHz clock speed, RSFQ DSP could be used to implement a Successive Interference Canceller for multi-user detection in a 3G wireless systems. The being developed DSP consists of a digital core, an RSFQ Multiply Accumulate unit (MAC), RSFQ fast cache memory and external semiconductor memory.The first part of this thesis is focusing on architecture and implementation of the hierarchical CMOS-RSFQ hybrid memory for the RSFQ DSP. The architecture ofthe RSFQ cache is optimized in order to reach the highest speed and reliable data communication with CMOS memory. Aspects of block synchronization betweenthe RSFQ cache and the RSFQ digital core are discussed and solved using a new developed RSFQ gate, C3. For design of different components of the DSP, a designapproach based on validated VHDL models is proposed and experimentally verified.The second part of this thesis is focusing on the design oflow-dissipative RSFQ circuits for interface to the superconducting qubits. Power dissipation ofRSFQ circuits is minimized. A low-temperature thermal model of resistively shunted Josephsonjunctions is developed and applied to optimize the shape of the shunt resistors in order to reduce their electron temperature. Depending on the available fabricationprocess the lowest noise temperature of RSFQ circuit can be in the range from 90 mK to 180 mK.

Jan 1, 20060 citations