A hybrid analog-to-digital converter is described that uses photonic waveform sampling coupled with superconducting electronics for quantization and conversion to a binary format. The architecture scheme exploits extremely low clock jitter, amplitude stability, and a picosecond sampling aperture from the photonic system and magnetic flux quantization and high-speed digital logic in the superconducting system. The operational speed of the conversion is primarily limited by the maximum speed of the superconducting logic elements.
A hybrid analog-to-digital converter is described that uses photonic waveform sampling coupled with superconducting electronics for quantization and conversion to a binary format. The architecture scheme exploits extremely low clock jitter, amplitude stability, and a picosecond sampling aperture from the photonic system and magnetic flux quantization and high-speed digital logic in the superconducting system. The operational speed of the conversion is primarily limited by the maximum speed of the superconducting logic elements.
Ultrafast switching speed, low power, natural quantization of magnetic flux, quantum accuracy, and low noise of cryogenic superconductor circuits enable fast and accurate data conversion between the analog and digital domains. Based on rapid single-flux quantum (RSFQ) logic, these integrated circuits are capable of achieving performance levels unattainable by any other technology. Two major classes of superconductor analog-to-digital converters (ADCs) are being developed - Nyquist sampling and oversampling converters. Complete systems with digital sampling at rates of /spl sim/20 GHz and above have been demonstrated using low-temperature superconductor device technology. Some ADC components have also been implemented using high-temperature superconductors. Superconductor ADCs have unique applications in true digital-RF communications, broadband instrumentation, and digital sensor readout. Their designs, test results, and future development trends are reviewed.
Analog-to-digital converters (ADCs) are electronic circuits that convert an electrical signal from the analog domain to the digital domain of binary numbers, which can then be processed by computers. A digital-to-analog converter (DAC) functions in the reverse direction, converting a sequence of binary numbers into a continuous electrical signal, and high-performance superconducting DACs are still being developed. A time-to-digital converter (TDC) digitizes time and resembles in some ways ADCs. Superconducting TDCs are simpler than ADCs and are being developed mostly for integration with cryogenic sensor arrays. Quantization refers to the selection of a discrete value for the magnitude when the signal is sampled, and is carried out by a quantizer. A high sampling rate with good linearity is necessary for high fidelity to the desired signal, and a DAC can be characterized by parameters of SNR and SFDR in much the same way as an ADC.
Superconducting devices have intrinsically superior characteristics to those of semiconductor devices. Presently, we can fabricate more than twenty thousand junctions on one chip using niobium technology. We have demonstrated the operation of a network system with a superconducting interconnection chip using voltage-state logic. Single flux quantum devices are promising for future superconducting applications because the clock frequency of SFQ logic is higher than that of voltage-state. We have proposed a high-end switch based on hybrid architecture using optical devices, semiconductors and SFQ devices. To demonstrate the high-speed operation of SFQ circuits, we developed an arbiter circuit that uses SFQ components and the arbiter circuit operates at 60 GHz. We also have developed a high Tc superconducting (HTS) SFQ sampler system for observing ultra-fast signal waveforms. In addition, we will discuss the prospects of future superconducting devices based on the fabrication technologies we developed.
This paper presents the progress we have made on our design, fabrication, and testing of a fully parallel superconducting analog-to-digital converter (ADC) with multi-GHz clock frequencies and input bandwidth. To our best knowledge, this converter is the first flash-type analog-to-digital converter ever reported in Josephson technology that fully integrates a quantizer and a thermometer-to-binary encoder to achieve binary outputs. In this design, the quantizer consists of 2(superscript N-1 comparators, each of which is realized using a hysteretic one- junction sampling SQUID driving a two-junction readout SQUID. A new logic family has been designed based on the same comparator building block and has been used to implement the thermometer-to- binary encoder. Taking advantage of the fact that the encoder's input is thermometer-coded, we have designed three-input and four-input quasi-XOR gates with only three NAND gates and therefore reduced significantly the total gate count. Functionalities of all the sub-circuits have been verified experimentally at clock frequencies up to 3 GHz, which is limited by our currently available testing equipment.
Superconductive electronics offers a unique combination of high bandwidth and low power for mission critical hardware such as digital processors at 20 to 100 GHz, microwatt per bit analog to digital converters, large digital switches at multi-Gb/s data rates, and low noise parametric amplifiers. This cryogenic technology, typically operating at a few degrees or a few tens of degrees Kelvin, depends upon the unique physics of superconducting materials such as Nb, NbN, and YBaCuO, and the fundamental circuit element, the Josephson junction (JJ) to create unique architectures of unprecedented design efficiency and performance. These circuits are based on the single flux quantum (SFQ) logic family, a technology that has no parallel in semiconductor electronics. Digital data is transmitted by voltage pulses with amplitude less than 1 mV, but at extremely high speeds. Individual gates have been operated as high as 370 GHz. In this paper, we present a brief overview of superconductive digital technology, describe some recent circuits, and discuss how the challenges to superconductive technology are being met, including the use of multi-chip module (MCM) technology, and the potential use of III-V HBT and HEMT circuits to provide interface drivers and amplifiers, possibly operated cryogenically.
A wide variety of applications, ranging from radio-frequency (RF) receivers for broadband communications and signal detection, on earth and in space, would benefit from high-performance superconductor analog-to-digital converters (ADCs), based on magnetic flux quantization and fast switching Josephson junctions. Superconductor ADCs are capable of very high sample rates (100 GHz or more), very high linearity, and high sensitivity. Nyquist-rate ADCs use the high sample rate to digitize a wide instantaneous bandwidth (tens of GHz) and are useful for wideband spectrum monitoring as well as high-end scientific instrumentation. Delta and delta-sigma oversampling ADCs use the high linearity to achieve programmable trade-off between dynamic range and instantaneous bandwidth. These lowpass and bandpass ADCs have been used for direct digitization of narrower (tens to hundreds of MHz) RF bands in the 1-20 GHz range for a variety of communications, intelligence, electronic warfare, and radar applications. Another application area of these cryogenic ADCs is for outputs of cryogenic sensor arrays and terahertz mixers. Recent advances in various classes of ADCs for different applications are described.