Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Transactions on Applied Superconductivity

Shift registers and correlators using a two-phase single-flux quantum pulse clock

Perng-Fei Yuh

Published Jun 1, 1993• 10 citations
Publisher

Abstract

A two-phase clocking scheme for rapid single flux quantum logic circuits, in particular, shift registers and correlators, is discussed. The two-phase pulse clock is generated on chip with one external clock line. The use of a two-phase clock improves the clock operating margins and eliminate the racethrough problem. A 32-b shift register has been built and tested up to a clock frequency of 21.6 GHz. A one-bit digital correlator with 32 stages has also been tested at low speed. The chips are fabricated using a Nb process.>

DOI
10.1109/77.257227

Related papers

Design and testing of rapid single flux quantum shift registers with magnetically coupled readout gates

Perng-Fei Yuh, Oleg A. Mukhanov

Experimental superconducting shift registers consisting of on-chip clock generators, clock regeneration and distribution circuits, shift register elements, and readout circuits are designed using rapid single flux quantum logic/memory (RSFQ) gates. A 7-b shift register has been tested to 12 GHz and a 17-b to 21 GHz using external triggering clocks with relative delay measurements. Testing with internal clocks generated from Josephson oscillations shows a potential high-speed operation of 45 GHz for the 7-b and 30 GHz for the 17-b shift registers. Two types of magnetically coupled readout gates are discussed. The chips are fabricated using a Nb/AlO/sub /x/Nb Josephson-junction process at a critical-current density of 1000 A/cm/sup 2/. The power dissipation per bit is 3 mu W.>

IEEE Transactions on Applied Superconductivity•Jan 1, 1992•21 citations

Design and Testing of Rapid Single Flux Quantum Shift Registers with Magnetically Coupled

Readout Gates, Perng-Fei Yuh, Oleg A. Mukhanov

Experimental superconducting shift registers con- sisting of on-chip clock generators, clock regeneration and dis- tribution circuits, shift register elements, and readout circuits are designed using rapid single flux quantum logic / memory (RSFQ) gates. A 7-b shift register has been tested to 12 GHz and a 17-b to 21 GHz using external triggering clocks with relative delay measurements. Testing with internal clocks generated from Josephson oscillations shows a potential high-speed opera- tion of 45 GHz for the 7-b and 30 GHz for the 17-b shift registers. Two types of magnetically coupled readout gates are discussed. The chips are fabricated using a Nb/AIO,/Nb Josephson-junction process at a critical-current density of 1000 A / cm2. The power dissipation per bit is 3 p.W.

•Jan 1, 1992•0 citations

A 512-bit shift register using compact two-phase single flux quantum clock generators with large margins and low power

Perng-Fei Yuh

A 512-b shift register was built and tested up to 14.5 GHz. The shift register uses a two-phase clock which is generated by coupling a master control line over many asymmetrically biased two-junction SQUIDs. Compared with other shift registers with Josephson transmission lines to deliver clock, this new clock system provides short delay, low power dissipation, and large DC bias margins. The shift register uses about 3000 Nb/AlO/sub x//Nb Josephson junctions and consumes about 0.1 mW.>

IEEE Transactions on Applied Superconductivity•Jan 1, 1993•2 citations

Performance issues in single flux quantum shift registers

J.H. Hang, John X. Przybysz

Testing on a single-flux-quantum (SFQ) shift register fabricated with a SFQ Nb-AlO/sub x/Nb Josephson junction process indicates that a stable flux quantum can be stored in a rapid SFQ (RSFQ) shift register stage and be shifted by SFQ pulses. Design simulations showed that logic errors can occur in SFQ shift registers even though the circuit passes the average voltage test. Three-junction-per-stage shift registers had an advantage over the two-junction-per-stage shift register in handling data with successive 1's and in incorporating resistors to increase tolerance of trapped magnetic flux. Input and output buffers for data and clock pulses were added to get an RSFQ shift register to obtain correct performance. The highest error-free operation speed for the data with successive 1's is about half of the speed for propagation of a lone data 1. Error-free operation of SFQ shift registers with three junctions per stage could be obtained up to speeds of 30-60 GHz with Josephson junctions having I/sub c/R/sub n/ (critical-current-normal-resistance product) values of 600 mu V.>

IEEE Transactions on Applied Superconductivity•Mar 1, 1993•8 citations

Demonstration of a 120 GHz single-flux-quantum shift register circuit based on a 10 kA cm−2Nb process

Hiroyuki Akaike, Takahiro Yamada, Akira Fujimaki +5 more

Designs and test results for a single-flux-quantum (SFQ) eight-bit shift register circuit operating at frequencies above 100 GHz are described. The high-speed performance was realized by introducing a planarized 10 kA cm −2 Nb fabrication process as an advanced process and by adopting middle-damped junctions with McCumber parameters β c of 1.8–2.9 in the circuit. The middle-damped junctions were used to reduce the repulsion between SFQ pulses and to adjust the timing. The circuit was designed using a cell-based design method and was tested by constructing an on-chip test system with a ladder-type four-bit high-frequency clock generator. We confirmed its correct operations up to 120 GHz.

Superconductor Science and Technology•Mar 16, 2006•33 citations

A fast Josephson SFQ shift register

F. Kuo, Stephen R. Whiteley, S. M. Faris

A Josephson SFQ (single flux quantum) shift register circuit operating under a two-phase power was designed and tested. The test cell was fabricated using the Nb/AlO/sub x//Nb junction SNEAP process. The main data latch is DC biased; the data storage is accomplished by the transfer of a single flux quantum in or out of a SQUID (superconducting quantum interference device) superconducting loop. A two-phase sinusoidal clock with offset is used to operate the circuit. Simulations verify that the operating frequency can go beyond 70 GHz, with operating margins exceeding 20%. Preliminary measurements indicate that the circuit operates as intended.>

IEEE Transactions on Magnetics•Mar 1, 1989•4 citations
A two-phase clocking scheme for rapid single flux quantum logic circuits, in particular, shift registers and correlators, is discussed. The two-phase pulse clock is generated on chip with one external clock line. The use of a two-phase clock improves the clock operating margins and eliminate the racethrough problem. A 32-b shift register has been built and tested up to a clock frequency of 21.6 GHz. A one-bit digital correlator with 32 stages has also been tested at low speed. The chips are fabricated using a Nb process.>
Experimental superconducting shift registers consisting of on-chip clock generators, clock regeneration and distribution circuits, shift register elements, and readout circuits are designed using rapid single flux quantum logic/memory (RSFQ) gates. A 7-b shift register has been tested to 12 GHz and a 17-b to 21 GHz using external triggering clocks with relative delay measurements. Testing with internal clocks generated from Josephson oscillations shows a potential high-speed operation of 45 GHz for the 7-b and 30 GHz for the 17-b shift registers. Two types of magnetically coupled readout gates are discussed. The chips are fabricated using a Nb/AlO/sub /x/Nb Josephson-junction process at a critical-current density of 1000 A/cm/sup 2/. The power dissipation per bit is 3 mu W.>
Experimental superconducting shift registers con- sisting of on-chip clock generators, clock regeneration and dis- tribution circuits, shift register elements, and readout circuits are designed using rapid single flux quantum logic / memory (RSFQ) gates. A 7-b shift register has been tested to 12 GHz and a 17-b to 21 GHz using external triggering clocks with relative delay measurements. Testing with internal clocks generated from Josephson oscillations shows a potential high-speed opera- tion of 45 GHz for the 7-b and 30 GHz for the 17-b shift registers. Two types of magnetically coupled readout gates are discussed. The chips are fabricated using a Nb/AIO,/Nb Josephson-junction process at a critical-current density of 1000 A / cm2. The power dissipation per bit is 3 p.W.
Testing on a single-flux-quantum (SFQ) shift register fabricated with a SFQ Nb-AlO/sub x/Nb Josephson junction process indicates that a stable flux quantum can be stored in a rapid SFQ (RSFQ) shift register stage and be shifted by SFQ pulses. Design simulations showed that logic errors can occur in SFQ shift registers even though the circuit passes the average voltage test. Three-junction-per-stage shift registers had an advantage over the two-junction-per-stage shift register in handling data with successive 1's and in incorporating resistors to increase tolerance of trapped magnetic flux. Input and output buffers for data and clock pulses were added to get an RSFQ shift register to obtain correct performance. The highest error-free operation speed for the data with successive 1's is about half of the speed for propagation of a lone data 1. Error-free operation of SFQ shift registers with three junctions per stage could be obtained up to speeds of 30-60 GHz with Josephson junctions having I/sub c/R/sub n/ (critical-current-normal-resistance product) values of 600 mu V.>
Designs and test results for a single-flux-quantum (SFQ) eight-bit shift register circuit operating at frequencies above 100 GHz are described. The high-speed performance was realized by introducing a planarized 10 kA cm −2 Nb fabrication process as an advanced process and by adopting middle-damped junctions with McCumber parameters β c of 1.8–2.9 in the circuit. The middle-damped junctions were used to reduce the repulsion between SFQ pulses and to adjust the timing. The circuit was designed using a cell-based design method and was tested by constructing an on-chip test system with a ladder-type four-bit high-frequency clock generator. We confirmed its correct operations up to 120 GHz.
A Josephson SFQ (single flux quantum) shift register circuit operating under a two-phase power was designed and tested. The test cell was fabricated using the Nb/AlO/sub x//Nb junction SNEAP process. The main data latch is DC biased; the data storage is accomplished by the transfer of a single flux quantum in or out of a SQUID (superconducting quantum interference device) superconducting loop. A two-phase sinusoidal clock with offset is used to operate the circuit. Simulations verify that the operating frequency can go beyond 70 GHz, with operating margins exceeding 20%. Preliminary measurements indicate that the circuit operates as intended.>