Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Log inSign up
Challenges
Datasets
Workspaces
Papers
Discussions
Leaderboard
Blog
Job Board
Q3AS

© 2026 Aqora Quantum S.A.S.

TermsPrivacyLegal Notice

IEEE Transactions on Applied Superconductivity

ERSFQ 4-to-16 Decoder for Energy-Efficient RAM

Alex F. Kirichenko, I. V. Vernik, Oleg A. Mukhanov, Thomas Ohki

Published Dec 23, 2014• 20 citations
Publisher

Abstract

We designed, fabricated, and demonstrated an energy-efficient ERSFQ 4-bit decoder. The first version of the decoder is designed and fabricated using HYPRES legacy 1.0-μm four-layer 4.5-kA/cm2process. It occupies an area of 700 μm × 1800 μm, which is to be reduced to 160 μm × 400 μm once fabricated using HYPRES's RIPPLE-2 0.25-μm six-layer process. The decoder features ±13% dc bias current operating margins and below 70-aJ energy consumption per one address select operation. We report test results of the decoder and discuss its future implementation in cryogenic random access memory devices, including magnetic memory devices.

DOI
10.1109/tasc.2014.2385479

Related papers

Energy-Efficient and Compact ERSFQ Decoder for Cryogenic RAM

I. V. Vernik, Alex F. Kirichenko, Oleg A. Mukhanov +1 more

We report on the development of energy-efficient decoders for cryogenic random access memory and register file. To reduce the pitch, area, and energy, our decoder employs a scalable binary tree architecture. We implemented these decoders using ERSFQ logic controlled by magnetically coupled address lines. These lines are driven by energy-efficient drivers based on the current-stirring technique. A 4-to-16 version of the decoder was laid out and fabricated in HYPRES 6-layer 10 kA/cm2and MIT LL 8-layer 10 kA/cm2processes with 15 and 28 μm decoder row pitch, respectively. The decoders were designed to have ~30 ps latency and dissipate ~40 aJ per clock. We experimentally confirmed the functionality of the circuits with ±8% dc bias margins and verified its operation up to 13 GHz clock.

IEEE Transactions on Applied Superconductivity•Dec 30, 2016•22 citations

ERSFQ 8-Bit Parallel Adders as a Process Benchmark

Alex F. Kirichenko, I. V. Vernik, John A. Vivalda +2 more

We have designed and demonstrated two versions of an ERSFQ 8-bit parallel adder. ERSFQ is a resistor-free approach to dc biasing of Single Flux Quantum circuits that dissipates orders of magnitude less power than a traditional RSFQ logic while operating and has zero dissipation in inactive mode. The adders were designed for and fabricated with various fabrication processes, including HYPRES's 1.0-μm 4-layer 4.5 kA/cm2process, HYPRES's 0.25-μm 4-layer 4.5 kA/cm2process, HYPRES's 0.25-μm 6-layer 4.5 kA/cm2planarized process, and MIT Lincoln Lab's 0.25-μm 4-layer 10 kA/cm2process. These circuits serve as a good LSI fabrication process benchmark. We describe design and report on test results of all versions of the adder.

IEEE Transactions on Applied Superconductivity•Nov 20, 2014•37 citations

Low-Power Digital Gates in ERSFQ and nSQUID Technology

M. Lucci, Jie Ren, Saad M. Sarwana +4 more

We designed and tested low-power digital gates based on the energy-efficient rapid single flux quantum (ERSFQ) and on the reversible nSQUID logic. The ERSFQ circuit consists of a series of 13 toggle flip-flops (TFFs), where the bias resistors are replaced by inductors which generate no energy dissipation in the static mode, resulting in a power consumption orders of magnitude below that of traditional RSFQ circuits during operation. The ERSFQ circuits were fabricated with HYPRES' standard 4.5-kA/cm2process and tested up to 20 GHz. The RF input level was about -25 dBm 50 Ω matched, and the output level was 400 μVpp. The nSQUID ring with “NOT” gates was fabricated with HYPRES' standard 1-kA/cm2process. The “0” and “1” input logic signals were realized injecting ±5 mA of current in a superconductive coil, obtaining 6 μVpp of amplitude as output signal. The test was performed at low frequency in order to verify the functionality and the ultralow power consumption.

IEEE Transactions on Applied Superconductivity•Feb 26, 2016•10 citations

Experimental Investigation of Energy-Efficient Digital Circuits Based on eSFQ Logic

Mark H. Volkmann, Anubhav Sahu, Coenrad Johann Fourie +1 more

We present the design and results of experimental verification methods for ultra-low-power digital circuits based on the recently introduced energy-efficient single flux quantum (eSFQ) logic. Similar to another low-power SFQ logic, ERSFQ, eSFQ circuits make use of superconducting dc bias current dividers and thus avoid static power dissipation. As a result, per-gate power dissipation is reduced by two orders of magnitude as compared to conventional rapid single flux quantum and static power dissipation is zero. The eSFQ circuits are fabricated using the HYPRES standard 4.5 kA/cm2process. We integrate a low-pass analog-to-digital modulator with our eSFQ deserializer to enable testing at high speed. In this paper, we demonstrate the viability and performance metrics of eSFQ circuits through functional and high-speed tests. Specifically, we confirmed correct operation and present measured parameter margins.

IEEE Transactions on Applied Superconductivity•Jan 16, 2013•30 citations

Implementation of energy efficient single flux quantum digital circuits with sub-aJ/bit operation

Mark H. Volkmann, Anubhav Sahu, Coenrad Johann Fourie +1 more

We report the first experimental demonstration of recently proposed energy efficient single flux quantum logic, eSFQ. This logic can represent the next generation of RSFQ logic, eliminating the dominant static power dissipation associated with a dc bias current distribution and providing over two orders of magnitude efficiency improvement over conventional RSFQ logic. We further demonstrate that the introduction of passive phase shifters allows the reduction of dynamic power dissipation by about 20%, reaching ∼0.8 aJ/bit operation. Two types of demonstration eSFQ circuit, shift registers and demultiplexers (deserializers), were implemented using the standard HYPRES 4.5 kA cm −2 fabrication process. In this paper, we present eSFQ circuit design and demonstrate the viability and performance metrics of eSFQ circuits through simulations and experimental testing.

arXiv:1209.6383•Superconductor Science and Technology•Nov 8, 2012•154 citations

Pipelined DC-powered SFQ RAM

Alex F. Kirichenko, Saad M. Sarwana, DARREN K. BROCK +1 more

We present the design and test results of components for a superconductor Cryogenic Random Access Memory (CRAM). The 16-Kb RAM design consists of four 4-Kb sub-arrays (blocks) with a 400 ps access time (latency) and a 100 ps cycle time (throughput). Each 4-Kb RAM block comprises a row-accessed 32/spl times/128 memory cell array, bipolar line drivers, row decoders, and column sense circuits. The implementation of specially designed distributed Josephson junctions in the sensing circuits reduces the overall size of the blocks and allows the use of smaller dc control currents.

IEEE Transactions on Applied Superconductivity•Mar 1, 2001•26 citations
We designed, fabricated, and demonstrated an energy-efficient ERSFQ 4-bit decoder. The first version of the decoder is designed and fabricated using HYPRES legacy 1.0-μm four-layer 4.5-kA/cm2process. It occupies an area of 700 μm × 1800 μm, which is to be reduced to 160 μm × 400 μm once fabricated using HYPRES's RIPPLE-2 0.25-μm six-layer process. The decoder features ±13% dc bias current operating margins and below 70-aJ energy consumption per one address select operation. We report test results of the decoder and discuss its future implementation in cryogenic random access memory devices, including magnetic memory devices.
We report on the development of energy-efficient decoders for cryogenic random access memory and register file. To reduce the pitch, area, and energy, our decoder employs a scalable binary tree architecture. We implemented these decoders using ERSFQ logic controlled by magnetically coupled address lines. These lines are driven by energy-efficient drivers based on the current-stirring technique. A 4-to-16 version of the decoder was laid out and fabricated in HYPRES 6-layer 10 kA/cm2and MIT LL 8-layer 10 kA/cm2processes with 15 and 28 μm decoder row pitch, respectively. The decoders were designed to have ~30 ps latency and dissipate ~40 aJ per clock. We experimentally confirmed the functionality of the circuits with ±8% dc bias margins and verified its operation up to 13 GHz clock.
We have designed and demonstrated two versions of an ERSFQ 8-bit parallel adder. ERSFQ is a resistor-free approach to dc biasing of Single Flux Quantum circuits that dissipates orders of magnitude less power than a traditional RSFQ logic while operating and has zero dissipation in inactive mode. The adders were designed for and fabricated with various fabrication processes, including HYPRES's 1.0-μm 4-layer 4.5 kA/cm2process, HYPRES's 0.25-μm 4-layer 4.5 kA/cm2process, HYPRES's 0.25-μm 6-layer 4.5 kA/cm2planarized process, and MIT Lincoln Lab's 0.25-μm 4-layer 10 kA/cm2process. These circuits serve as a good LSI fabrication process benchmark. We describe design and report on test results of all versions of the adder.
We designed and tested low-power digital gates based on the energy-efficient rapid single flux quantum (ERSFQ) and on the reversible nSQUID logic. The ERSFQ circuit consists of a series of 13 toggle flip-flops (TFFs), where the bias resistors are replaced by inductors which generate no energy dissipation in the static mode, resulting in a power consumption orders of magnitude below that of traditional RSFQ circuits during operation. The ERSFQ circuits were fabricated with HYPRES' standard 4.5-kA/cm2process and tested up to 20 GHz. The RF input level was about -25 dBm 50 Ω matched, and the output level was 400 μVpp. The nSQUID ring with “NOT” gates was fabricated with HYPRES' standard 1-kA/cm2process. The “0” and “1” input logic signals were realized injecting ±5 mA of current in a superconductive coil, obtaining 6 μVpp of amplitude as output signal. The test was performed at low frequency in order to verify the functionality and the ultralow power consumption.
We present the design and results of experimental verification methods for ultra-low-power digital circuits based on the recently introduced energy-efficient single flux quantum (eSFQ) logic. Similar to another low-power SFQ logic, ERSFQ, eSFQ circuits make use of superconducting dc bias current dividers and thus avoid static power dissipation. As a result, per-gate power dissipation is reduced by two orders of magnitude as compared to conventional rapid single flux quantum and static power dissipation is zero. The eSFQ circuits are fabricated using the HYPRES standard 4.5 kA/cm2process. We integrate a low-pass analog-to-digital modulator with our eSFQ deserializer to enable testing at high speed. In this paper, we demonstrate the viability and performance metrics of eSFQ circuits through functional and high-speed tests. Specifically, we confirmed correct operation and present measured parameter margins.
We report the first experimental demonstration of recently proposed energy efficient single flux quantum logic, eSFQ. This logic can represent the next generation of RSFQ logic, eliminating the dominant static power dissipation associated with a dc bias current distribution and providing over two orders of magnitude efficiency improvement over conventional RSFQ logic. We further demonstrate that the introduction of passive phase shifters allows the reduction of dynamic power dissipation by about 20%, reaching ∼0.8 aJ/bit operation. Two types of demonstration eSFQ circuit, shift registers and demultiplexers (deserializers), were implemented using the standard HYPRES 4.5 kA cm −2 fabrication process. In this paper, we present eSFQ circuit design and demonstrate the viability and performance metrics of eSFQ circuits through simulations and experimental testing.
We present the design and test results of components for a superconductor Cryogenic Random Access Memory (CRAM). The 16-Kb RAM design consists of four 4-Kb sub-arrays (blocks) with a 400 ps access time (latency) and a 100 ps cycle time (throughput). Each 4-Kb RAM block comprises a row-accessed 32/spl times/128 memory cell array, bipolar line drivers, row decoders, and column sense circuits. The implementation of specially designed distributed Josephson junctions in the sensing circuits reduces the overall size of the blocks and allows the use of smaller dc control currents.